Get complete information related to latest Axle Cap Screw Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Axle Cap Screw Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Axle Cap Screw Tenders.
Tender For auction sale of depot ferrous scrap - lot no.m.mms.exmp.d & i.06.2026-27.05 description- mixed ferrous melting scrap amalgamating the various types consisting of fresh plate, sheets plate cuttings and shearing of all shapes and sizes. structural sections, scrap low phosphorous steel, iron pipes, bar fittings, buffer cases and plungers (other than cast steel) sleeves and spindles with heads, screw couplings, tie bars, all types of equalising beams & centralize beams, fish plate other than cast steel), wire & wire rope, all types of sleeper, all types of bars and rods, junk kutchra, steel fabrication, nut bolt, grease seal etc. (our offer): mixed ferrous melting scrap amalgamating the various type consisting of fresh plate, sheets plate cuttings and shearing of all shapes and sizes, structural sections, lever, scrap low phosphorous steel, iron pipes, bar fittings, flap door, irs sleepers, shaft, wire rope, pipes, brake cylinder, buffer cases and plungers other than cast steel sleeves and spindles with heads, screw couplings, tie bars, all types of centralize beams, pendrol clip, fish plate other than cast steel, all types of bars and rods, junk kuchra, steel fabrication, nut bolt, grease seal etc., as in the lot. materials are laying in one place at "d-1" sector & two places at "i-2" sector. before bidding, bidders are requested to inspect the lot. cutting may be allowed only for off sizes for loading purpose. loading will be done by purchaser's own arrangement.
Tender For auction sale of depot ferrous scrap - lot no.y.mms.exmp.f-1.06.26.56 description- mixed ferrous melting scrap amalgamating the various type consisting of scrap classes like- fresh plate & sheets plate cuttings and shearing of all shapes and sizes structural sections.scrap low phosphorous steel .iron pipes .bar fittings .buffer cases and plungers (other than cast steel ) sleeves and spindles with heads .tie bars .all types of equilising beams & centralize beams , wire and fish plate other than cast steel.wire & wire rope,all types of chains, all types of sleeper ,shock observer some quantity of negligeable nf item may be attached , all types of bars & rods. junk kutchra, spring wire , screw couplings, steel fabrication and misc, nut bolt,grease seal etc. as in the lot (above item may or may not be available in the lot) [loading will be done by purchaser's own arrangement]
Tender For auction sale of depot ferrous scrap - lot no.m.mms.exmp.f & g.06.2026-27.04 description- mixed ferrous melting scrap amalgamating the various types consisting of fresh plate, sheets plate cuttings and shearing of all shapes and sizes. structural sections, scrap low phosphorous steel, iron pipes, bar fittings, buffer cases and plungers (other than cast steel) sleeves and spindles with heads, screw couplings, tie bars, all types of equalising beams & centralize beams, fish plate other than cast steel), wire & wire rope, all types of sleeper, all types of bars and rods, junk kutchra, steel fabrication, nut bolt, grease seal etc. (our offer): mixed ferrous melting scrap amalgamating the various type consisting of fresh plate, sheets plate cuttings and shearing of all shapes and sizes, structural sections, lever, scrap low phosphorous steel, iron pipes, bar fittings, flap door, irs sleepers, shaft, wire rope, pipes, brake cylinder, buffer cases and plungers other than cast steel sleeves and spindles with heads, screw couplings, tie bars, all types of centralize beams, pendrol clip, fish plate other than cast steel, all types of bars and rods, junk kuchra, steel fabrication, nut bolt, grease seal etc., as in the lot. materials are laying in one place at "f" sector & one place at "g-1" sector before bidding, bidders are requested to inspect the lot. cutting may be allowed only for off sizes for loading purpose. loading will be done by purchaser's own arrangement.
Tender For corrigendum : tn-mm-2170 supply of railway track material for private siding and marshalling yard of sstps suratgarh - cms crossing 1:8.5, 52kg to rdso drg. no. t-4867, cms crossing 52 kg 1 in 12 rdso drawing no. t-4734, slide chair plate 52 kg of 1: 8.5 (01 set= 20 nos. plate) railway drawing no. :- t-4968, combination fish plate 60 kg and 52 kg to rdso drg. no. t-696-699 (1 set = 2 pair (4 fish plate, 8 nut,8bolt), glued joint 60kg to rdso drg no. t-5843, glued insulated rail joint g-3(l) for 52 kg rail rdso no- t- 671, check rail set at 4.33 mtr. for 1 in 8.5 of crossing bg for 52 kg rdso drawing no. rt-4773, gauge tie plate 52 kg of 1:8.5 railway drawing no.:- t-5812, t-5812/1, t-5812/2, ms plate c/switch 52 kg of 1:8.5 for lever box railway drawing no.t-3901, bearing plate of c/switch 52 kg 1:8.5 (01 set= 06 nos.) railway drawing no. t-4869 to t-4874, fish plate for 52 kg rail 610 mm long rdso n0- t-(090)(one setcomprise of 2 nos. fish plate & 4 nos. fish bolt & nut), galvaized nut & lock nut id-no. 3/16 and bolt with flat&spring washer size(16x50x38 )mm as per rdso no eti/c/0073, gfn liner 60 kg to rdso drg. no. t-3706, 60s approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4786, 60s-1as approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4787, 60 -2as approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4788, 60-3a approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4789, 60-4a approch sleeper of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4790, sleeper n0.1 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4791, sleeper n0.2 of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4791, sleeper n0.3 of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4793, sleeper n0.4 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4794, sleeper n0.5 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4795, sleeper n0.6 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4796, sleeper n0.7 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4797, sleeper n0.8 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4798, sleeper n0.9 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4799, sleeper n0.1 0 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4800, sleeper n0. 1 1 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4801, sleeper n0.1 2 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4802, sleeper n0.1 3 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4803, sleeper n0.1 4 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4804, sleeper n0.1 5 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4805, sleeper n0.1 6 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4806, sleeper n0.1 7 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4807, sleeper n0.1 8 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4808, sleeper n0.1 9 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4809, sleeper n0.20 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4810, sleeper n0. 21 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4811, sleeper n0.22 of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4812, stretcher bar of c/switch 52 kg of 1:8.5 (01 set= 06 nos.) railway drawing no.- t-4885- 86, t-4887-88, t-4889-90, rail dolly bg attachment for transportation of prc sleeper with insulated wheel, grsp for 1:8.5 t/out, 52 kg to rdso drg. no. t-4865, gfn liner rt-3707, gfn liner rt-3708, improved sej 60 kg with complete fitting (rt-4902) and with psc sleepers (rt-4149) for max. gap =80 mm(in single gap)(fittings- plate screw,washer,nut bolt,m.s. bracket,c.i. chair,check rails,tongue rails,stock rails,gap avoid rails,split pin etc. as per rdso numbers), 1 in 12 curved switch (lh turnout/rh turnout, 01 rh and 01 lh tounge rail length 12356 mm and stock rail 01 lh & 01 rh 13000 mm l
Tender For corrigendum : supply of railway track material for private siding and marshalling yard of sstps suratgarh - cms crossing 1:8.5, 52kg to rdso drg. no. t-4867, cms crossing 52 kg 1 in 12 rdso drawing no. t-4734, slide chair plate 52 kg of 1: 8.5 (01 set= 20 nos., plate) railway drawing no. :- t-4968, combination fish plate 60 kg and 52 kg to rdso drg., no. t-696-699 (1 set = 2 pair (4 fish plate, 8, nut,8bolt), glued joint 60kg to rdso drg no. t-5843, glued insulated rail joint g-3(l) for 52 kg rail rdso, no- t- 671, check rail set at 4.33 mtr. for 1 in 8.5 of crossing bg, for 52 kg rdso drawing no. rt-4773, gauge tie plate 52 kg of 1:8.5 railway drawing no.:-, t-5812, t-5812/1, t-5812/2, ms plate c/switch 52 kg of 1:8.5 for lever box, railway drawing no.t-3901, bearing plate of c/switch 52 kg 1:8.5 (01 set= 06, nos.) railway drawing no. t-4869 to t-4874, fish plate for 52 kg rail 610 mm long rdso n0- t-, 090)(one setcomprise of 2 nos. fish plate & 4, nos. fish bolt & nut), galvaized nut & lock nut id-no. 3/16 and bolt, with flat&spring washer size(16x50x38 )mm as, per rdso no eti/c/0073, gfn liner 60 kg to rdso drg. no. t-3706, 60s approach sleeper of point & crossing 1 in 8.5 52, 60 kg as per rdso n0.4786, 60s-1as approach sleeper of point & crossing 1 in 8.5, 52 /60 kg as per rdso n0.4787, 60 -2as approach sleeper of point & crossing 1 in 8.5, 52 /60 kg as per rdso n0.4788, 60-3a approach sleeper of point & crossing 1 in 8.5 52, 60 kg as per rdso n0.4789, 60-4a approch sleeper of point& crossing 1 in 8.5 52, 60 kg as per rdso n0.4790, sleeper n0.1 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4791, sleeper n0.2 of point& crossing 1 in 8.5 52 /60 kg as, per rdso n0.4791, sleeper n0.3 of point& crossing 1 in 8.5 52 /60 kg as, per rdso n0.4793, sleeper n0.4 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4794, sleeper n0.5 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4795, sleeper n0.6 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4796, sleeper n0.7 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4797, sleeper n0.8 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4798, sleeper n0.9 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4799, sleeper n0.1 0 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4800, sleeper n0. 1 1 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4801, sleeper n0.1 2 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4802, sleeper n0.1 3 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4803, sleeper n0.1 4 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4804, sleeper n0.1 5 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4805, sleeper n0.1 6 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4806, sleeper n0.1 7 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4807, sleeper n0.1 8 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4808, sleeper n0.1 9 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4809, sleeper n0.20 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4810, sleeper n0. 21 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4811, sleeper n0.22 of point& crossing 1 in 8.5 52 /60 kg as, per rdso n0.4812, stretcher bar of c/switch 52 kg of 1:8.5 (01 set= 06, nos.) railway drawing no.- t-4885- 86, t-4887-88, t-, 4889-90, rail dolly bg attachment for transportation of, prc sleeper with insulated wheel, grsp for 1:8.5 t/out, 52 kg to rdso drg. no. t-4865, gfn liner rt-3707, gfn liner rt-3708, improved sej 60 kg with complete fitting (rt-, 4902) and with psc sleepers (rt-4149) for max., gap =80 mm(in single gap), (fittings- plate screw,washer,nut bolt,m.s., bracket,c.i. chair,check rails,tongue, rails,stock rails,gap avoid rails,split pin etc., as per rdso numbers), 1 in 12 curved switch (lh turnout/rh turnout, 01, rh and 01 lh tounge rail length 12356 mm and s
Tender For auction sale of depot ferrous scrap - mixed ferrous melting scrap amaigamating the varous typed consisting of fresh plate, sheets plate cuting and shearing of all shaped and size. structural sectons, scrap low phosphorous steel, iron pipes, bar fittings, buffer cases and plungers (other than cast steel) sleeves and spindles with head, screw couplings, ties bar all types of eqaulilising beams & centralize beams, fish plate other than cast steel wire & wire rop all types of chains all types of sleeper all types of bars and rods junk kutchra, steel fabriction nut bolt, grease seal etc. [our offer:- miscellaneous ferrous scrap (equalizing stay long pin, short pin, equalizing stay bracket, lh & rh bracket, spring guide, anchor link bracket on bogie frame, dust shield spring, flange for fixing shock absorber, equalizing stay, anchor link, bss hanger, bss hanger pin, brake head, block hanger for bogie brake, levers, brake head adjuster, brake head spring, parts of shock absorber, compensating ring etc.]).i lot no ea982604005 location- scrap yard
Tender For auction sale of pway scrap - wi scrap (erc, nutt &bolts , plate screw, fish plate, sej bracket, level xing board & pipe, tie bar, ms lug, metal liner, strecher bar, gauge tie plate , slide chair, broken l-xing gate material, m.s rod (broken sleeper )etc.). total wt= 36.5 mt. other details attached as per tms/udm lot no. 014795-26-00006
Tender For auction sale of depot ferrous scrap - lot no.y.mms.exmp.m-2.06.26.50 description- mixed ferrous melting scrap amalgamating the various type consisting of scrap classes like- fresh plate & sheets plate cuttings and shearing of all shapes and sizes structural sections.scrap low phosphorous steel .iron pipes .bar fittings .buffer cases and plungers (other than cast steel) sleeves and spindles with heads .tie bars .all types of equilising beams & centralize beams , wire and fish plate other than cast steel. wire & wire rope, all types of chains, all types of sleeper ,shock observer some quantity of negligeable nf item may be attached , all types of bars & rods. junk kutchra, spring wire , screw couplings, steel fabrication and misc, nut bolt, grease seal etc. as in the lot (above item may or may not be available in the lot) [loading will be done by purchaser's own arrangement]
Tender For auction sale of depot ferrous scrap - lot no.y.mms.exmp.l.06.26.51 description- mixed ferrous melting scrap amalgamating the various type consisting of scrap classes like- fresh plate & sheets plate cuttings and shearing of all shapes and sizes structural sections. scrap low phosphorous steel .iron pipes .bar fittings .buffer cases and plungers (other than cast steel) sleeves and spindles with heads .tie bars .all types of equilising beams & centralize beams , wire and fish plate other than cast steel.wire & wire rope,all types of chains, all types of sleeper ,shock observer some quantity of negligeable nf item may be attached , all types of bars & rods. junk kutchra, spring wire , screw couplings, steel fabrication and misc, nut bolt,grease seal etc. as in the lot (above item may or may not be available in the lot) [loading will be done by purchaser's own arrangement]
Tender For corrigendum : fabrication and supply of 6400 mm over riding curved fan shaped switches 1 in 8.5, bg, 60kg. (uic) on psc sleeper as per rdso drawing no. t-4966 with latest alteration and specifications irs:t-10-2025 (with latest amendment i.e. 30 days prior to date of tender opening), complete with all parts including check rails & excluding standard fish plate and bolts, plate screw, e.r. clips, liners, gr pads and insulating liners (list of fittings attached as annexure- c). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] [ rate of supply 30 units per month , commencement time allowed -1 month ]