Latest axle counter scrap Tenders | Government axle counter scrap Tenders

Central Government/Public Sector

CTN :45708490

09 Jul, 2026 NA

Jagadhri - Haryana

Tender For supply of guide rail profile 3x19x60 length-2000 mm (for linen room sliding door arrangement) conforming to is:733-83, 63400 wp and to rcf drawing no. cc56271, alt-a/nil. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45698154

29 Jun, 2026 NA

Ajmer - Rajasthan

Tender For supply of rail rod external fixator set consisting of 1 rail rod frame, clamp, rods, schanz pins. any size and number of screws as per requirement depending on the case (pent profile) 1 set [ warranty period: 30 months after the date of delivery ] ]

Corporations/Associations/Others

CTN :45662707

02 Jul, 2026 4.05 Lacs

Multi City - Karnataka

Tender For supply and maintenance of necessary materials for 7 pure drinking water units in bilagi town - item description: painting steel work with deluxe multi surface paint to give an even shade. two coat applied @ 0.90l/10 m² over an under coat of primer applied @ 0.80 l/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of engineer-in-charge.. (pwd sr v-2, 2023-24, item no-8.33.3, page no-46), item description: providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of engineer-in-charge..:(pwd sr 2023-24 / volumme ii / i.no-8.3.2 /p.no-41), item description: supplying and fixing rolling shutters of approved make, made of required size m.s. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to is: 4454 - part 1 and m.s. top cover of required thickness for rolling shutters. 80x1.25 mm m.s. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the engineer-in-charge.(csr 2023-24 v-2 itm no.11.6.1 pg 78), item description: dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of engineer-in-charge. for thickness of tiles 10 mm to 25 mm (pwd sr 2023-24 / volumme ii /i.no-19.22.1 /p.no-189), item description: providing and laying cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per engineer incharge (pwd sr 2023-24 / volumme ii / i.no-9.4 /p.no-59), item description: flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications.(pwd sr 2023-24 / volumme ii / i.no- 9.35 /p.no-64), item description: providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered upvc (matching to ral-9016) sections and with minimum tio2 (titanium dioxide) at 6phr with tpe(thermo plastic elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with galvanized iron profile through-out the window frame. the outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and sash with overall size of 39mm x 75mm with gi reinforcement of 2mm and mesh sash of size 37mm x 58mm. coextruded glazing bead for fixing of glass shall be of size 20mm x 24 mm. windows shall be provided with 6mm plain float glass, standard hardware& multi point locking system with touch lock. wall thickness of frame & sash shall be of 2mm-2.5mm. maximum possible size 2419mm x 2200mm (the cost is inclusive of all fixtures and separate charges for minor t&p s shall not be made) (pwd sr 2023-24/volumme ii/i.no-12.90 /p.no-110), item description: providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel prime

Central Government/Public Sector

CTN :45652815

13 Jul, 2026 NA

Bangalore - Karnataka

Tender For centralized server: power edge r550 server 3.5" chassis with up to 8 3.5in hard disk / ssd drives 2u 1 x intel? xeon? 4310-silver 2.1ghz, turbo 3.3ghz, hyper threading, 18 mb cache, 10.5gt/s 2upi, 12cores, 24threads 120w (dual cpu upgradeable) (total 12cores, 24threads) 32 gb 1 x 32 gb rdimm, 3200 mhz, @ 2666 mhz (16 memory slops) up to 2048gb ddr4 memory half length, low profile, 3x16+ 1x4 slots 2 x 2.4 tb 512e 10 rpm sas 12gbps 2.5in hot-plug hard drive (2.4 tb on raid '1') for data perc h755 integrated raid controller, 8gb nv cache battery backup (performance raid) raid '0', '1' '10', '5', '50', '6' '60' support (up to 8, 3.5in/2.5in hdds/ssds) idrac9, enterprise 15g (remote management) broadcom 5720 dual port gigabit 1gbps network lom (total 2 x 1 gbps) 800 watts + 800 watts mix mode redundant power supply platinum tpm 1.2/2.0 fips, cc-tcg certified, tpm 2.0 high quality sliding rack mount rail kit 3 year pro support 4hr mission critical. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45638286

08 Jul, 2026 NA

Bengaluru - Karnataka

Tender For corrigendum : supply of rail profile weld grinder as per rdso specification no.tm/sm/10) (dt. 16. 8 .1991) (firstrevision - july 2020) ]

Central Government/Public Sector

CTN :45405511

15 Jul, 2026 NA

Jodhpur - Rajasthan

Tender For corrigendum : running contract for manufacture and supply of 10125 mm thick web curved switches with check rails for 25t axle load with complete fittings as per rdso drg. no. t-9791 (alt-02) and spring setting device as per drg. no. t-6216 with latest alteration, including metal liner, pocket type ncr-grsp (10mm thick) but excluding standard fish plates, standard fish bolts & nuts, elastic rail clips, hvn insulating liners. pre-curving of tongue rail & stock rails for turnouts of similar & contrary flexure shall be done whenever required, without additional payment, in accordance with rdso's guidelines of pre-curving issued vide letter no. ct/ptx/tws design dated 27.07.2018. the stock rail shall be in 60e1 rail profile of r-260 grade and tongue rail shall be in 60e1a1 rail profile of r-260 grade as per irs specification no. t-12 and irs specification no. t 10 2025 and irs no. irs no. t 62 2025. " as per note sl no. 27 of rdso drg. no. t-9791, alt-02, "10% quantity (i.e. 1/10th of the quantity of purchase order of 1 in 12 60e1a1-tws) of breakage prone and wear prone spare parts (shown in part-c of rdso/t-9791, alt-02, annexure-b. ) shall be supplied with every purchase order of 1 in 12 60e1a1-tws for replacement of these spare parts as per need during service life of the 1 in 12 60e1a1-tws ".note:- (i) the rate includes cost of stock rails, tongue rails and check rails. note:- (ii) ncr grsp shall be procured from rdso approved vendors only as per irs specification no. t- 55-2025 (revision-1) and with process inspection by rites (non-tpi) note:- (iii) spring setting device shall be procured from rdso approved vendors only as per irs specification no. t- 54 (revised - 2024) note:- (iv) list of fittings is enclosed as annexure-a . note:- (v) list of breakage prone and wear prone spare parts is enclosed as annexure-b. note:- (vi)the lh & rh quantity bifurcation is as under- lh = 400 sets & rh = 400 sets. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45638131

21 Jul, 2026 NA

Jodhpur - Rajasthan

Tender For supply of guide rail profile, l=1765 mm, as per drawing: cc43484 [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45616428

25 Jun, 2026 NA

Lumding - Assam

Tender For supply of export quality pwi tool kit model tk-1 for rgm machine consisting of following items- 1.clearance gauge bg 2. shim feeler gauge.3. stepped feeler gauge 4. tapered gauge. 5. gap gauge. 6. rail thermometer similar to model mfmbt-a. 7. pair of versine holder. 8. versine scale. 9. nylon cord on winder. 10. magnifying glass.11. adjustable mirror for checking cracks. 12. vertical wear measuring gauge similar to model vwg-1. 13. vernier caliper. 14. track square. 15. rail profile plotting curve. 16. steel scale 12inch /300 mm. 17. outside caliper 150 mm.18. inside caliper 150 mm. 19. spirit level similar to model sl-2. 20. white clad pocket steel tape 3 meters long. 21. white clad pocket steel tape 20 meters. 22. straight edge 10 cm. 23. pocket torch. 24. data book with pen. 25. calculator (scientific). 26. glass fiber safari well padded box with lock & key arrangement provided with well cushioned double decker system to avoid loss &damage of instruments [ warranty period: 30 months after the date of delivery ] ]

CTN :45438720

10 Jul, 2026 NA

Multi City - Multi State

Tender For corrigendum : supply of 60 kg 90 uts rail grade 880 conforming to irs: t12/2009 with up-to-date amendments & corrections slips with details as under (a) rail steel grade :880 (b) rail section profile: as per appendix-ii of irst -12-2009 for uic 60 kg/m (c) class of rail: a (d) rail ends: undrilled (e) length:13 meter. as per "indian railway standard specification for rail conforming to irs: t12/2009" with up-to-date correction slips and specifications. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45594064

08 Jul, 2026 39.16 Lacs

Chennai - Tamil Nadu

Tender For supply of versine kit 50mm , versine kit 25mm , straight edge steel 1m , shim feeler gauge , air compressor , hand grinder , bolt tightening machine heavy duty robel , supply of socket hex 41w ejector , digital portable toe load , torque wrench , t handle sq drive , pwi tool kit box , rail thermometer , nose wear gauge , gps based oms machine , rail profile grinder with fixtures for 60 kg rail , fixed base bench vice , rake ballast 4 prong , wire claws 8 prong , pan iron mortar , steel shovel , general spanner ring , tool bag , mechanical jack , screw driver set , double ended spanner , check rail clearance gauge , portable welding machine up to 200a , diesel generator set , philips 200w led flood light , erc clip aplicator and extractor or panpullar for pandrol fastening * /bid number : gem/2026/b/7677013 + /dated: 17-06-2026 ' ' / bid document 1 / 31

Axle Counter Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors