Latest axle counter Tenders | Government axle counter Tenders

Central Government/Public Sector

CTN :45737411

08 Jul, 2026 NA

Moradabad - Uttar Pradesh

Tender For supply & installation of high voltage dc-dc converter module dc 210 for converting 24 vdc to 96 vdc of multi section digital axle counter systems as per rdso specn. no.rdso/spn/176/2013 or latest of cel make . inspection by consignee after receipt of test certificate and guarantee certificate of oem. [warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45735907

10 Jul, 2026 NA

Pune - Maharashtra

Tender For supply of tx and rx coil assembly web mounting and phase reversal type suitable for cel make single section digital axle counter (ssdac) as per rdso specification no spn/177/2012 ver 3 or latest [warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45733097

07 Jul, 2026 NA

Multi City - Jharkhand

Tender For auction sale of others - disposal of scrap released materials such as: (1) smps ips dcdp (r), qty=02 nos. (2) smps ips smrs (r), qty=03 nos. (3) ufsbi (r), qty=10 nos. (4) data logger, qty=02 nos. (5) universal axle counter/reset box, qty=24 nos. (6) copper strip, qty=109.9 mtr. (7) ct box 20 pairs, qty=35 nos. (8) ct box 10 pairs, qty=10 nos. (9) eld, qty=03 nos. (10) track feed battery charger, qty=81 nos. (11) ct box 50 pairs, qty=01 no. (12) ips status monitoring panel, qty=03 nos. (13) ufsbi alarm panel presentive, qty=08 nos. (14) fire alarm panel, qty=05 nos. (15) lightning surge protection unit, qty=03 nos. (16) lpd spd box, qty=03 nos. (17) remote terminal unit, qty=02 nos. (18) stm cabinet, qty=04 nos. (19) autometic battery charger, qty=01 no. (20) filter unit, qty=08 nos. (21) track circuit choke type-b, qty=162 nos. (22) sm penal c double line, qty=04 nos. (23) fire extingusher, qty=04 nos. (24) vft transformer, qty=60 nos. (25) relay, qty=1337 nos. (26) ctr, qty=10 nos. (27) signal post (r), qty=35 nos. (28) location box half (r), qty=38 nos. (29) location box full (r), qty=130 nos. (30) relay rack, qty=21 nos. location:- released materials of rvnl lying near lthr station in ttipl campus(ssr), sse/sig/brwd, jharkhand.

CTN :45736911

14 Jul, 2026 NA

Howrah - West Bengal

Tender For supply of acr card (axle counter room card) suitable for azs350u compatibility, as per rdso specification no. rdso/spn/176/2013 ver 3.0 or latest suitable for using in siemens make msdac or similar. [ warranty period: 30 months after the date of delivery ] ]

CTN :45730462

10 Jul, 2026 NA

Sealdah - West Bengal

Tender For comprehensive annual maintenance contract of eldyne-make multi section digital axle counter (msdac) at dum dum jn. station yard in sealdah division for twenty two months.

CTN :45737950

13 Jul, 2026 NA

Sundergarh - Odisha

Tender For providing of custom bid for services - biennial maintenance contract for micro controller based multi section digital axle counter for s&t system

CTN :45710493

06 Jul, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, bobrnm1, bobrm1, bcnm1,boxnhl bvzc, bobrnel & boxnr wagons no as following: [1] scr 10099663802 boxnm1 [2] er 72029662187 bobrnm1 [3] er 72029960313 bobrm1 [4] cr 30019060122 bcnm1 [5] nwr 22111111109 boxnhl [6] scr 85099560413 bvzc [7] ser 85079560471 bvzc [8] ser 10079666892 boxnm1 [9] er 72029760012 bobrnel [10] ser 10079665581 boxnr. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (112.90 mt) is the lot quantity (112.90 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, bcnm1,boxnhl & boxnr : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1, bobrm1 & bobrnel : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (iii) for bvzc wagon : wheel set with rb andaxle box, brake cylinder, distributer valve, draft gear, coupler body, yoke & yoke pin as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

CTN :45710494

06 Jul, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, boxnr, boxnlw, bcnm1 & bobrnmi wagons no as following: [1] scr 10099523700 boxnm1 [2] scr 25099661369 boxnr [3] secr 14140762292 boxnlw [4] scr 30099186132 bcnm1 [5] ser 10079666083 boxnm1 [6] er 72029563392 bobrnm1 [7] scr 10099660689 boxnr. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (79.190 mt) is the lot quantity (79.190 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, boxnr, boxnlw & bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(iii) sl. no 04 fitted with casnub bogie 22w(m) which is to be sold with wagon.

Central Government/Public Sector

CTN :42645667

03 Jul, 2026 NA

Koraput - Odisha

Tender For bid to ras corrigendum : tender for supply of manufacturing and supply of forgings as per hal supplied technology and raw materials e e - link rod , link rod , cover , angle , lever , clip , t-joint , union , union , casing , angle , flange , angle bend , union , adapter , atomizer , flange , nozzle , supporting ring , bush , teejoint , lock washer , screw , bush , boss , angle bar , housing , casing , valve , beam , flange , flange , t-joint , clamp , block , sleeve , flap valve , valve plate , sphere , t-joint , sleeve , t-joint , lock washer , lock washer , block , link , t-joint , union , lock washer , safety washer , seal yoke , supporting ring , bush , casing of seal , housing , valve , shackle , lock washer , union , cross piece

CTN :45695412

15 Jul, 2026 NA

Multi City - Andhra Pradesh

Tender For supply of esp spares for emitting frame system of unit-3/sdstps -0 supporting beam,drg no. 2-79-021-01451 (item no.01 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part top(6-tube assembly), drg no.2-79-021-00880 (item no.02 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part top(7-tube assembly), drg no.2-79-021-00880 (item no.03 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), suspension rod assembly), drg no.3-79-021-00245 (item no.05 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part bottom(4-tube assembly), drg no.2-79-022-00881 (item no.13 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part bottom(7-tube assembly), drg no.2-79-022-00881 (item no.14 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part bottom(8-tube assembly), drg no.2-79-022-00881 (item no.15 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part middle(4-tube assembly), drg no.2-79-032-00882 (item no.17 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part middle(7-tube assembly), drg no.2-79-032-00882 (item no.18 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part middle(8-tube assembly), drg no.2-79-032-00882 (item no.19 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), vertical stay, drg no.3-70-032-01280 (item no.30 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257(is 1239)

Axle Counter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector