Get complete information related to latest Axle Generator Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Axle Generator Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Axle Generator Tenders.
Tender For corrigendum : supply of 20 kva dg set - supply and installation of 20 kva dg set , transportation sea freight loading and unloading the dg set upto keating point lighthosue , supply and installation of of armoured cable 2 core 25 sqmm , supply and installation of earthing , supply and installation of copper strip , laying of cable and dg set installation , supply and installation of amf panel , consumable of spares for 02 years
Tender For bid to ras tender for supply of deutz dg set spares- fuel injector , spin on fuel filter , air filter element deutz dg set 80 kva model , spin on oil filter duetz dg set 80kva model , crank case breather , rubber hose breather , oil return line , return line , fuel line main fuel filter to fip , rubber sleeve air filter , hose clip air filter , sealing rubber air filter , hose clip air filter , thermostat , coolant pipe , coolant pipe , compensating line , sealing ring for injector , tappet cover gasket deutz dg set 80 kva model , narrow v belt tcd 2013 , head gasket 3 notch , oil return line , fuel line tank to ws , fuel return line 80kva
Tender For bid to ras supply of 750kva diesel generator set , installation and commissioning , supply of piping and structural material , installation and commissioning exhaust , supply of offline and online piping , installation and commissioning of offlin , foundation and civil- related works , foundation for exhaust stack , supply of spares as per clause a11 of ss , installation and commissioning earthing , charges for obtaining statutory approval , amc for 1st year , amc for 2nd year , amc for 3rd year , amc for 4th year , amc for 5th year , removal and shifting of the old dg set , third party inspection charges
Tender For provision towards purchase of necessary items (equipments) to government hospital in mydukur municipality. - supply, transportation and installation of desktop with fully loaded software as desired, with the following configuration. 1. processor: intel® core? i7-12th generation or higher version processor with intel® hd graphics 770 (2.9 ghz base frequency, up to 4.9 ghz with intel® turbo boost technology, 25 mb l3 cache, 12 cores 20 threads) intel q670 chipset 2. memory: 8 gb ddr4-3200 mhz sdram (1 x 8 gb) memory slots 2 dimm 3. hard drive 512gb ssd (hard drive 2 nd 1 tb 7200 sata hdd ) 4. 1 audio line in; 1 audio line out; 1 hdmi; 1 rj-45; 1 vga; 4 usb 3.0; 4 usb 2.0 5. operating systems: windows 11 pro professional 64 bit with product key license. 6. communications (intel wi-fi & blue tooth) 7. preloaded with latest version of antivirus symantec/ mcafee / nod32 / e-trust / avast internet security / kaspersky / quick heal / escan / msecure with following features: antivirus, antispyware, intrusion prevention browser protection with single management console with 3 year subscription with support updates and patches. 8. accessories: with required connecting cables and driver media should be supplied. 9. warranty: 3 year standard on-site comprehensive hardware warranty (including o.s support, spares- parts/service/labour/on-site) makes: hp prodesk or its equivalent in dell, supply, transportation and installation of all-in-one (print, copy, scan) with duplex, auto document feeder features: -print resolution 600 x 600dpi -print speed (a4) 27ppm -auto duplex printing standard -available paper size for auto duplex print a4, letter, legal (*1), indian legal, fulllscape -copy copy speed (a4) 27ppm maximum number of copies up to 999 copies scan type colour contact image sensor scan resolution optical up to 600 x 600dpi pull scan yes, usb and network makes: makes: canon imageclass mf244dw /hp/brother dcpb7535dw or its equivalen, supply installation testing and commissioning of dg set complete with 1500 rpm diesel engine of suitable bhp & ac brush less spdp alternator mounted on a common base frame & coupled through a flexible coupling or close coupled.alternator: it shall be self-regulated, self-excited and confirms to is: 13364/1992 or latest version with regulation of +5% from no load to full load, ip23, with standard alternator protection (over voltage, over speed& under voltage).diesel engine: it shall have residential silencer, up to 10 m exhaust piping, electronic / mechanical governor, manual & electric start, batteries, fuel tank & piping, control panel (16 g) with spn(for 5 kva)/tpn mccb of required rating (25/36/50 ka) with plc based engine controller supplied by oem, ammeter, voltmeter, frequency meter or multi-function meter, energy meter & hour meter, engine instruments panel, avm and automatic voltage regulator. the diesel engine shall be capable of providing 10% overload for 1 hr for every 11 hrs of continuous running at full load. the dg set shall be supplied with initial filling of fuel, lube oil, coolant oil as per oem specifications and shall be tested at site.acoustic enclosure: weatherproof, powder coated acoustic enclosure for dg set for sound attenuation fabricated from 1.6 mm crca sheet steel (structure) with side wall fabricated from 1.6 mm crca sheet and filled with foam as per cpcb norms latest amendments & is 8183. the doors are fabricated from 1.6 mm crca sheet packed with acoustic material, floor of ms chequered plate 5.0 mm thick, all doors/ opening are sealed with neoprene/ epdn gaskets.the dg set shall be maintained for two years after commissioning by the supplier including regular servicing,cost of consumables etc complete as specified by the oem along with warranty for two years.the enclosure has built in fuel tank, residential silencer (isolated from main dg chamber) with protection and tripping of dg set against temperature of more than 50 °c. all controls for opera
Tender For : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of spares for diese
Tender For corrigendum : supply of 2000 kva e 1500 rpm, 415v, 0.80 pf lag , prime power dg set with radiator on common base frame. , fuel day tank of 990 litres capacity with accessories , 24v dc, 360 ah, minimum, lead acid automotive type battery , 24 v dc float cum boost battery charger , necessary fuel piping from day tank to engine , silencer , exhaust piping , with insulation and aluminium cladding upto 30 meters height with supports , galvanised pre-fabricated support structure for exhaust piping -common for two dg , acoustic enclosure for one dg with ventilation fans, exhaust fans, if applicable and lighting fixtures. , lt power, control and instrument cable including all accessories like lugs, glands, ties etc . , b- check kit filters to be supplied at the time of commissioning , first fill of lube oil, coolant and coolant conditioner to be supplied at the time of commissioning , tools and tackles for offered dg set. , alternator phase side and neutral side terminal box with ct , mandatory spares for dg sets and amf panel , amf panel for dg set , supervision of erection of dg set and accessories , supervision of testing, commissioning and load trial of dg set and accessories. , total freight charges for all supplies including spares
Tender For tender for supply of periodical maintenance and operation of electrical and mechanical installations involving operation , repairs and maintenance , attending to complaints/faults/ breakdowns and taking rectification action , ensuring serviceability/satisfactory working condition of the systems , carrying-out preventive maintenance , maintenance of records/ documents etc. under this contract on all working days including saturdays , sundays and holidays as per tender specifications , terms & conditions by providing/engaging following minimum number of man power i/c reliever. (a) highly skilled (sr. supervisor) - 1 nos. (b) highly skilled (supervisor) - 1 nos. (b) skilled data entry operator - 1 nos. (c) skilled technician - 14 nos. i/c relievers (d) unskilled helper - 14 nos. i/c relievers total minimum manpower i/c reliever- 31 nos. note- relievers shall do duty of electrician//helper as per site requirement. , carriage of diesel (4 drums 200 ltr each) from petrol pump (any petrol pump among located in kushinagar as decided by eic-aai) to the sub station (dg set room) which includes hiring of vehicle loading & unloading of empty and oil filled drums at site. note - empty drum will be provided by aai. , servicing of l&t make , model u-power omega air circuit breaker 630/800 a through l&t service engineer / l&t authorized service engineer including carrying out of following works- racking out & removal of acb from electrical panel , cleaning all parts for dust deposits foreign particles etc , degreasing the various parts of acb. cleaning all parts with cleaning agents such as crc 2-26 checking the various relay/protection settings and other setting of acb contacts , releases etc , checking the hardware for wear & tear , checking of termination & tightness , checking for all hardwares for its presence , replacement of spares / accessories for defective / worn out items (supply of spares / accessories required for healthiness of acb are in aai scope) , regreasing of the acb parts as recommended by oem , refixing the acb , testing and observance for normal operation of acb complete as required. note - service report to be submitted in l&t letterhead / l&t authorise service dealer letter head. , one time servicing , maintenance , testing , overhauling of complete out door type package/ compact sub-station of m/s c & s make through oem service er. or oem authorised dealer /service er.only as per the oem recommendation and scope of work of tsc/ scc of the contract. pss is comprising of following- ht panel - 12kv , 630 a , 21ka/3sec , 2way non extensible sf6 insulated rmu comprising of 01 nos. 630a manual load breaker switch and 01 no. 630a manual vaccum circuit breaker. transformer - 11kv/0.433kv , 400 kva oil type transformer -01 nos. lv componenet - 4 p , 630a , drawout acb - 01 no. 3p 400a mccb for capacitor panel capacitor panel - apfc 200kvar capacitor panel- 01 nos. pss is comprising all above i/c metering , relay etc complete. oem service er. has to submit the relay calibration report along with service and maintenance report of transformer , rmu , ht & lt panel and capacitor panel i/c healthiness report after service and other report if any as per oem recommendations complete. , carriying out the dehydration of transformer oil of 400 kva transformer (make - kotson) in 400 kva c &s pss at site i/c transportation of dehydration machine , di-electric strength test (bdv value) of oil before and after dehydration at site and submisstion of report as per requirement. note - the transformer having capacity of 330 ltrs of tranformer oil. , supply of new transformer oil conforming to is-335 in non-returnable barrel as per requirement. , one time servicing , maintenance , testing , overhauling of complete outdoor type package/compact sub-station of m/s sudhir power make through oem service er or oem authorised dealer /service er.only as per the oem recommendation and scope of work of
Tender For corrigendum : supply of 15 lines of dg set spares d d - liquid gasket , valve cotter , spring washer lub oil filter , bolt 5 by 16 inch , screw banjo , pipe pump to filter , hose connection , valve spring inner , valve spring outer , valve sterm seal , push rod yda , washer special injector , washer injector , hellow screw , washer tapped cover bolt