Get complete information related to latest Baby Chair Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Baby Chair Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Baby Chair Tenders.
Tender For auction sale of pway scrap - scrap ms melting, pway fittings consisting 1..ms bolt broken & mixed 3283 nos 3.119 mts 2. screw pin off size broken & mixed 2232 nos 1.027 mts 3. stracher bar broken & mixed 21 nos 0.525 mts 4. bearing plate off size broken & mixed 39 nos 0.759 mts 5. slide chair plate off size broken & mixed 80 nos 1.52 mts 6.st sleepers ml broken 5 nos 0.25 mts 7. gauge tie plate broken broken & mixed 15 nos 1.2 mts 8. bridge chair plate broken & mixed 15 nos 0.825 mts 9.inner outer bolt with clip broken & mixed 1050 nos 2.205 mts 10.pull out glued joint test pieces 8 nos 1.2 mts 11. ssd 18 nos 1.26 mts 12. 52kg rail pieces off size broken 35 nos (12.00 r/m) 0.623 mts 13. 90lbs rail pieces off size broken40 nos (15.00 r/m) 0.666 mts 14. ms tie bar broken & mixed 15 nos 0.153 mts 15. 52kg joggal plate broken & mixed 50 nos 0.8 mts 16.hook bolt broken & mixed 700 nos 1.12 mts 17. 60kg rail pieces off size broken 155 nos (82.67 r/m) 4.988 mts 18.ms melting (enginnering board and ms scrap) 150(board)/melting 2.622 mts 19.bridge chakker plate off size 12 nos 1.8 mts 20.sej bracket off size 180 nos 2.574 mts 21.60 kg fish plate 01 meter crack & broken 50 nos 1.5 mts 22. 52 kg fish plate 01meter crack & broken 10 nos 0.25 mts 23. erci/c 297 nos 0.264 mts 24.ms liner iii/c 2800 nos 0.672 mts 25.ms clamp crack & broken mixed 25 nos 0.17 mts 26.52kg fish plate (60 cm) broken & mixed 11 nos 0.143 mts 27. released broken two-way key 300 nos 0.165 mts total lot qty - 32.400 mts sse lot no bpl/s/bina/pw/scrap/m.s.melting pway fitting consisting 2025-26/11 note 1. buyer should visit the site before bidding. 2.mode of delivery given by actual weight. 3.it is strictly advice to the bidder to see the lot and loading point personally before bidding the lot in e-auction. no claim will be entertained after sale of the lot. 4. qty of lot been assessed on approximate basis so weight may be vary +/- 10% in total weight 5. being a technical person, stock holder will be responsible weight of the material mention above.
Tender For auction sale of pway scrap - (1)scrap 60 kg erc t- 3701 (intack & broken) 2550 nos 2.168 mts (2) scrap 60 m.s. liner (intack & broken) 250 nos 0.058 mts (3) scrap slide chair broken, off sizes 230 nos 3.910 mts (4) scrap spl. bearing plate,broken & off sizes 88 nos 1.584 mts (5) scrap m.s. tie gauge type plate broken , off sizes 8 nos 0.600 mts (6) scrap m.s. plate t- 3901 15 nos 0.150 mts (7) scrap 168 & 171 lbs st sleeper, broken 36 nos 2.160 mts (8) scrap hook bolt & nut for channel sleeper, off sizes with spring washer 1382 nos 1.658 mts (9) scrap t- head bolt & nut for channel sleeper, off sizes & with or without spring washer, tapred washer, anular cap 2392 nos 1.794 mts (10) scrap guard bolt & nut for channel sleeper, off sizes & with or without spring washer, tapred washer 1593 nos 1.195 mts ( 11)scrap plate screw broken & off sizes 6770 nos 3.385 mts (12) scrap stretcher bar with & without lug broken & off sizes 37 nos 0.555 mts ( 13) scrap m.s. bolts and nut of sorts, off sizes 2548 nos 1.529 mts (14) scrap chequered plate for channel sleeper, off sizes 59 nos 2.360 mts (15) scrap m.s canted bearing plate, off sizes 17 nos 0.085 mts (16) scrap ms braket for sej off sizes 327 nos 3.270 mts (17) scrap ms angle all type, broken, off sizes 60 nos 0.600 mts (18) scrap stretcher bar off sizes & braket (lug) 39 nos 0.195 mts (19) scrap m.s tieber off sizes 84 nos 0.420 mts (20) scrap 52 kg ord fish plate,broken off sizes t-090(m) 62 nos 0.868 mts (21) scrap 52 kg joggled fish plate, broken 24 nos 0.384 mts (22) m.s. scrap of l c gate & other (boom, tiebar, angle, wire, gate stand, gate post, broken pipe, piece st sleeper, clap, fish plate, rail cutting, and etc .) 420 nos 0.420 mts (23) scrap 60 kg rail (belwo one mtr long ) 60 nos= 40.62 rm 2.451 mts (24) scrap 52 kg rail (belwo one mtr long ) 10 nos= 4.52 rm 0.235 mts (25) scrap 90 lbs rail (belwo one mtr long ) 6 nos= 2.98 rm 0.133 mts ( 26) scrap 100 lbs rail (belwo one mtr long ) 5 nos= 1.84 rm 0.091 mts total lot weight 32.258 mts sse lot no sse bpl/bpf/scrap ms melting 32 25 26 dt 07.02.2026 note 1. delivery can be given by actual 2. it is strictly advised to the bidder to see the lot and the loading point personally before bidding the lot in e-auction no claim will be entertained after sale of lot.3 during the delivery against lot is approx. and there may be variation in weight up to +/- 10% due to average weight assessment
Tender For auction sale of pway scrap - 1] st sleeper points & crossing - 14 nos, 2] st sleeper - 112 nos, 3] slide chair 52 kg - 101 nos, 4] stretcher bar 52 kg bracket - 299 nos, 5] stretcher bar 52 kg lug - 80 nos, 6] stretcher bar of sizes -188 nos, 7] check flat - 30.72 metres, 8] bridge tie angle - 54.43 metre, 9] sej bracket - 90 nos, 10] bearing plate of sizes - 128 nos, 11] gauge tie plate - 16 nos, 12] ms tie bar - 132 nos, 13] tie bar peg - 123 nos, 14] metal liner t.3741 - 2304 nos, 15] metal liner t.3742 - 2040 nos, 16] ms canted bearing plate - 11 nos and ms scrap - 6.655 mt. - total qty - 25.412 mt as is where is basis, [condemned, unserviceable, released, class - iii], custodian : sr. section engineer/p.way/nagercoil[ncj]., s.1539 no. 593658 dtd.21.12.2025, location : aralvaymoli [aay] yard (km 303/900 - 304/000 lhs) near railway qtrs.., note : 1] delivery to be made on actual weighment basis. 2] when crane loading is not possible, the purchase [by engaging his own labourers] is permitted to cut rails to loadable sizes of not less than 150 kgs., 3] in all cases, i.e. crane loading/ manual loading, when the length of rails exceeds 5 metres length, the purchaser [by engaging his own labourers] is permitted to cut rails to convenient lengths not less than 2.5 meters., 4] purchaser [by engaging his own labourers] is permitted to cut rails and hand over the non - ferrous and excess quantity to the custodian., special conditions : 1) jurisdiction- the courts in chennai alone shall have exclusive jurisdiction in the matters/disputes arising out of the contract/ arbitration/ conciliation proceedings and the place of arbitration/ conciliation, if any, shall be in chennai only., 2) forfeiture of bsv payment along with emd.-in southern railway bsv partly paid along with emd will be forfeited, if full payment is not received in stipulated time, with interest if any applicable., 3) part delivery-part delivery is not permitted against part payment on southern railway., nfs/side assets : 1] nfs as per tms jsos & ds 8., [pl no. 98057054, hsn code : 720429, gst : 18 % on fcm], item : ms items on actual weighment. [image attached].
Tender For auction sale of pway scrap - released and unserviceable cl.iii p.way fittings ferrous scrap to be delivered on actual weighment basis.(1)er clips cl-iii- 3597 nos-2.852 mt (2) metal liner rt 3741/3742 cl-iii- 17952 nos -7.055 mt.(3)slide chair shorts of sizes-22 nos-0.579 mt.total qty.-10.486 mt. not for sale: all other materials available near by the lot treated as nfs since office permises. note: (1)any other material in the lot other than the items earmarked for sale as per do should be handed over to the custodian as nfs.(2)crane /jcb/manual loading is permitted (3)purchasers should survey the material location and qty. before bidding to the lot. s.1539 no. 079546-25-00011 dt: 03.03.26. hsn code: 72044900. p.l no. 98057054.custodian - sse/pw/tnm.
Tender For name of the work: supply and fixing of play materials @ shanthi nagar park & bus stand park in ammapettai (selection grade) town panchayat, thanjavur district - manufacturing, supplying and fixing of chain link - 2 x 2 using 10 gauge galvanised iron wire (of all sizes) the rate including cost and conveyance of all materials and labour charges for fixing in position etc., complete, supply and fixing of play materials including cost and convyenace of all materials and labour chrages for manufacturing, loading, transportation, unloading and providing necessary foundation with neat finishing etc., complete twister double, push & pull chair, cross walker, leg press, ab trainer single, pushup bar, double bar, roman rings, twister sitting & standng, ss -swing 2 seater, ss- see saw 4 seater, ss circular swing, ss roller slide, animal rider, merry go round 4 seater, badminton post, fr multiple system, double bar, single bar, cycle, frc framer with bullocks, decorated calf frc
Tender For auction sale of pway scrap - hook bolt off size (us) broken/s tie angel corrugated (u/s), chequered plate corroded (us),m/s clit inner/outer with t bolt (us) broken, fish plate 52 kg off size (us) broken, fish plate 60 kg 0.910mm glued (us) broken, stretcher bar us broken, slide chair plate (us) broken, check rail heel block off size (us) broken, metal liner t-3741/3742 (us), erc (us) broken, plate screw off size (us) broken, cst -9 pot (52kg/90r) (us) broken, 90 r fish plate us/broken, sej bearing plate (us) broken, different sizes bolts & nuts, misc/scrap; compressing of i) cut piece of flange different sizes, ii)others
Tender For auction sale of pway scrap - scrap pway fitting consisting of sej small fitting, ci acb plate, small fittings of cms xing, fish plate, fitting for switches, nut and bolt, , stud bolt, clit, dogs bolt, metal liner, cst 9 sleeper, xing bolt, ci block, sej chair plate, gauge tie plate, slide chair, meal liner, rail screw, clamp, tie bar patti, distance block, fish bolt, rail cut pieces below 2mtr, sej angle, bearing plate, ci block, cut pcs of rails below two meters, screw key, inserts, digging bar, nut bolts of sort and sizes including xing bearing plate, and other similar types of pway fittings items with or without nut, bolt and other attachments. location - b by 1
Tender For supply of wedge drg. no. rdso/t-6305 for slide chair for 6400 curved switch with zu-1-60 thickweb tongue rails bg-(1673mm) for 60 kg (uic) on psc sleepers. [ warranty period: 30 months after the date ofdelivery ] ]