Latest backrest lock Tenders | Government backrest lock Tenders

Central Government/Public Sector

CTN :45725830

06 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For biennial rate contract for torishima make bcw motor-spares for ntpc group stations - torishima:500mw:o-ring_4120.1, torishima:500mw:o-ring_4120.2, torishima:500mw:o-ring_4120.3, torishima:500mw:o-ring_4120.4, torishima:500mw:lock washer_9311.8:3.3kv, torishima:500mw:lock wshr_9311.1, torishima:500mw:lock wshr_9311.2, torishima:500mw:lock washer_9311.6:3.3kv, torishima:500mw:lock washer_9311.7:3.3kv, torishima:500mw:sprg wshr_9300.4, torishima:500mw:sprg wshr_9300.5, torishima:500mw:spring wshr_9300.6:3.3kv, torishima:500mw:spring wshr_9300.7:3.3kv, torishima:500mw:sprng wshr_9300.22:3.3kv, torishima:500mw:sprng wshr_9300.24:3.3kv, torishima:500mw:sprng wshr_9300.21:3.3kv, torishima:500mw:sprg wshr_9300.20_3.3kv, torishima:500mw:gasket_4000.21_bcw:3.3kv, torishima:500mw:gasket_4000.22_bcw:3.3kv, torishima:500mw:gasket_4000.23, torishima:500mw:gasket_4000.24_bcw:3.3kv, torishima:500mw:gasket_4000.20_3.3kv, torishima:500mw:lock washr_9311.20_3.3kv, torishima:500mw:lock washr_9311.21:3.3kv, torishima:500mw:lock washr_9311.22:3.3kv, torishima:500mw:hex bolt_9010.20_3.3kv, silica gel,torishima, torishima:glycol filling kit bcw, torishima:500mw:brg slve up_5290.1, torishima:500mw:brg slv low_5290.2, torishima:500mw:brg seg low_3870.2:3.3kv, torishima:500mw:heat barr pipe_hbp:3.3kv, torishima:500mw:guide ring _1311.2:3.3kv, torishima:earth plate_8223 bcw, torishima:500mw:strainer_7911, torishima:500mw:ring_5000_bcw:3.3kv, stud bolt,9020.6,torishima, hex nut,9200.6,torishima, earth bolt&nut,9020.30&9200.30,torishima, btm flg stud&nut,9020&9200,torishima, hex head bolt,9010.3/9010.4,torishima, torishima:500mw:metaflux gskt_4113:3.3kv, stator coil,8140,torishima,3.3kv, wedge,oak,8133w,torishima,hlav2x300+, wedge,fagus,8133f,torishima,hlav2x300+, stator slot cell,6892,torishima, wedge stopper,5001,torishima, coil bind,8134,torishima, temp sticker,8143,torishima, o-ring,torishima, o-ring,4120.12,torishima, o-ring,torishima, solder slve,8148,torishima, star connector,8222,torishima, insul tape,8141,torishima, heat shrink,6894,torishima, terminal unit,8340,torishima, glue,0900,torishima, seal comp,8147,torishima, washer,torishima, semiconductor tape,8149,torishima, solder,0140,torishima, insulation bushing,5202,torishima, hex bolt,9200.26,torishima, connector,8221,torishima, stator core assy,8132,torishima,3.3kv, torishima:500mw:o-ring_4120.1, torishima:500mw:o-ring_4120.2, torishima:500mw:o-ring_4120.3, torishima:500mw:o-ring_4120.4, torishima:500mw:lock wshr_9311.8, torishima:500mw:lock washer_9311.1_6.6kv, torishima:500mw:lock wshr_9311.2, torishima:500mw:lock wshr_9311.6, torishima:500mw:lock wshr_9311.7, torishima:500mw:sprg wshr_9300.4, torishima:500mw:sprg wshr_9300.5, torishima:500mw:sprg wshr_9300.6, torishima:500mw:spring wshr_9300.7:6.6kv, torishima:500mw:sprg wshr_9300.22, torishima:500mw:sprg wshr_9300.24, torishima:500mw:sprg wshr_9300.21, torishima:500mw:sprg wshr_9300.20_6.6kv, torishima:500mw:gasket_4000.21_bcw:6.6kv, torishima:500mw:gasket_4000.22_6.6kv, torishima:500mw:gasket_4000.23, torishima:500mw:gasket_4000.24, torishima:500mw:gasket_4000.20_6.6kv, torishima:500mw:lock wshr_9311.20_6.6kv, torishima:500mw:lock washr_9311.21:6.6kv, torishima:500mw:lock washr_9311.22:6.6kv, torishima:500mw:hex bolt_9010.20_6.6kv, torishima:500mw:brg slv low_5290.2, torishima:500mw:brg sgmt up_3870.1, torishima:500mw:brg sgmt low_3870.2, torishima:500mw:thrust brg plt_3840, torishima:500mw:heat barr pipe_hbp:6.6kv, torishima:500mw:guide ring _1311.2_6.6kv, torishima:500mw:strainer_7911, torishima:500mw:ring_5000_bcw:6.6kv, bot flg stud&nut,9020/9200,torishima, hex hd bolt,9010.3/9010.4,torishima, torishima:500mw:metaflux gskt_4113_6.6kv, stator coil,8140,torishima,6.6kv, wedge,oak,8133w,torishima,6.6kv, wedge,fagus,8133f,torishima,6.6kv, stator slot cell,6892,torishima,6.6kv, stator core assy,8132,torishima,6.6kv, torishima:660/800mw:o-ring_4120.1, torishima:660/800mw:o-ring_4120.2, torishima:660/800mw:o-ring_4120.3, t

Central Government/Public Sector

CTN :45736817

10 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of ss wire rope end fitting part no.5341 as per rdso drg. no. eti/ohe/p/5341 rev-a or latest and wedge part no.5321 with fasteners(split pin 4x32 and bolt m16x60/38 with nut and lock nut) as per rdso spec no.ti/spc/ohe/fittings/0130 (10/13) with a & c slip no.1 or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government / Public Sector

CTN :45737463

04 Jul, 2026 NA

Multi City - Multi State

Tender For supply of wedge lock to sanrok make drawing 1ed - 1208 and confirming to rdso specification no. rdso/2011/cg-03 rev. 01 [ warranty period: 30 months after the date of delivery ] ]

CTN :45715484

14 Jul, 2026 50.00 Lacs

Mumbai - Maharashtra

Tender For supply of 7mm locking screw , tit 3 point 5mm can locking screw , tit distal fibula va lcp w o s , tit anatomical proximal tibia locking plate , tit antero medial distal femur locking plate , tit periprosthetic cable locking plate , tit periprosthetic lock screw torx 5.0mm , tit needle free cable with lock , tit lateral support lcp for profaan , tit cal-lock anterior lcp w g , tit cal-lock anterior lcp wog , tit cal-lock combined lcp wg , tit posterior distal tibia lcp , tit beveled screw , tit multifunction tibia nail mtn , tit xpert humerus nail , tit philos gt locking plate , tit oberon mono screw single thread , tit oberon poly screw single thread , tit oberon poly screw dual thread , tit oberon poly screw two start , tit oberon red poly screw , tit oberon iliac poly screw , tit oberon lateral offset connector , tit oberon cross link connector small medium large extra large , tit oberon innie for screw , tit oberon conn rod , cocr oberon connection rod , tit oberon offset , tit oberon axial , tit mono axial screw , tit poly axial screw , tit reduction screw , tit connection rod , tit transverse connector , tit cross link connector size 30mm to 70mm , tit cervical spine plate 23mm to 70mm , tit antecep anterior cervical plate , tit 4 point 0mm screw for cervical spine plate , tit antecep self drilling screw , tit antecep self tapping screw , tit antecep rescue screw , tit lockcer self drilling screw , tit lock screw for cervical spine plate , tit eco cage , tit mesh cage , tit expandable cage , tit x jer jack cage 12 mm 14mm 16mm , tit tlif cage kidney cage , tit lumion tlif cage , tit lumion swivel tlif cage , peek lumion tlif cage sterile , tit plif cage , tit plif cage s type , peek plif cages type sterile , tit kugel lumber and thoracic cage length , peek kugel lumber and thoracic cage sterile , tit cervical cage width 12mm l , tit paxton cervical cage , peek paxton cervical cage sterile , tit cervics spacer with screw , peek cervics spacer with screw sterile , tit lock screw for cervics , tit exical cage with plate , tit lockcer cage with screw , tit cevior spacer , tit kugel lordotic cage , tit laminar hook wide blade , tit washer spiked stapples , tit corex poly screw fully th. , tit corex poly screw partly th , tit corex occipital screw , tit corex occipital midline plate small medium large , tit corex occipital adjustable plate small standard , tit corex connecition rod , tit corex pre-curved oc rod , tit corex precurved oc plate rod , tit corex dual dia connection rod , tit corex lateral offset connector , tit corex cross link connector small medium large , tit corex offset , tit corex offset triangle , tit corex axial , tit corex odontoid screw , tit oberon fen poly screw st , flexibutton l , bio ference , washer , persist , megabraid , extrabraid , rapid fix , meniscal darn , meril suture passer , meril suture passer nitinol for knee , endostud fixation button with loop 10mm , instarepti with needle , rotafix ti withneedle , filahook with needle with tape , rotafix peek knotless , suture shuttle 45 deg right , nitinol loop wire , shaver blade full radius resector 4point2mm , shaver blade round bur 5point5mm , transparent rigid cannula , persist pro probe 90deg , tit va locking screw 2point4 //bid details 2 / 107 mm s h , tit cortical screw 2point4 mm sh , tit va x lcp 2point42point7mm , tit va straight fusion lcp 2point42point7mm , tit va cloverleaf fusion lcp 2point42point7mm , tit va open wedge osteotomy lcp , tit va first mtp fusion lcp 2point42point7mm left right , 1dot6 mm compression wires 150 mm , tit locking screw 2 mm sh , tit cortical screw 2 mm sh , tit straight lcp 2 mm , tit t lcp 2 mm head 2 h , tit condylar lcp 2 mm , tit 3d lcp plate 2mm left right , tit metatarsus l lcp 2point 2point7 mm , tit metatarsus t lcp head 3h 2point42point7mm , tit cuboid lcp2point42point7mm , tit navicular lcp 2point42point7mm , tit 2 hole gap lcp 2point42point7mm , coolief knee crfa kit , coolief lumber spine crfa kit

State Government

CTN :45685523

08 Jul, 2026 44.62 Lacs

Bharuch - Gujarat

Tender For providing and supplying furniture for iti valia, dist.bharuch - providing and supplying high-back chair with a durable metal framework, upholstered with artificial leather/leatherette and molded pu foam. the chair shall include molded seat and back covers, with the back foam ergonomically contoured to provide lumbar support for enhanced comfort. the chair shall be equipped with high-durability casters and a hydraulic system. it must feature a gas lift cylinder with a minimum 5-year warranty. the overall dimensions of the chair shall be approximately 53 cm (w) x 79 cm (h) for the back, and 51 cm (w) x 49 cm (d) for the seat. the pu foam shall be molded with a density of 45 ± 2 kg/m³. the chair shall have one-piece armrests that are scratch and weather resistant. it shall be equipped with a permanent contact mechanism allowing 360° rotation, 12° seat tilt, and 19° back tilt with a front pivot for tilting, ensuring the user's feet remain on the ground for added comfort. additional features shall include tilt tension adjustment, static seat depth adjustment of 0.5 cm, 5-position locking system, and an anti-shock back mechanism to prevent sudden impact when the backrest lock is released. it shall be confirmed and approved in advance by the architect, along with a description and image, or as directed by the engineer-in-charge. , providing and supplying medium-back chair with a durable metal framework, upholstered with changeable fabric upholstery covers (as per requirement) and molded pu foam. the chair shall include molded seat and back covers, with the back foam contoured to provide lumbar support for added comfort. it shall have high-durability casters and a hydraulic system with a gas lift cylinder having a minimum 5-year warranty. chair dimensions shall be approximately 47.5 cm (w) x 58 cm (h) for the back, and 49 cm (w) x 48 cm (d) for the seat. the pu foam shall be molded with a density of 45 ± 2 kg/m³. the chair shall include one-piece armrests that are scratch and weather resistant. it shall be equipped with a permanent contact mechanism offering 360° rotation, pneumatic height adjustment, 17° maximum tilt, and tilt tension adjustment. it shall be confirmed and approved in advance by the architect, along with a description and image, or as directed by the engineer-in-charge. , providing and supplying law back chair for work center & other staff the seat & back are made of m.s frame work. upholstered with changeable fabric upholstery covers (as per requirement) and molded pu foam, together with molded seat & back covers. the back foam should be designed with contoured lumber support for extra comfort. caster of high durability & hydraulic. the chair should have cylinder with 5 years warranty. the size of chair 45cm x 45cm (back side) and 45cm x 43cm (seat size). the pu foam should be molded with density =45 ± 2 kg/m3 .with one piece armrests. the armrests are scratch and weather resistant. the permanent contact mechanisms is designed with 360° revolving type, with pneumatic height adjustment & 17° maximum tilt only & tilt tension adjustment facility. complete as per sample approved and as directed by the architect and approved by the engineer in charge , providing and supplying visitor or guest chair with seat and back made of 12 mm thick hot-pressed plywood, upholstered with changeable fabric upholstery covers (as per requirement) and molded pu foam, along with molded seat and back covers. the back foam shall be contoured to provide lumbar support for enhanced comfort. the chair dimensions shall be approximately 45 cm (w) x 38 cm (h) for the back, and 45 cm (w) x 43 cm (d) for the seat. the pu foam shall be molded with a density of 45 ± 2 kg/m³. the armrests and legs shall be fabricated from powder-coated mild steel (ms) structure as per architect's selection. the seat and back shall be securely fixed to the ms structure using all necessary hardware. it shall be confirmed and approved in advance by

Central Government And Public Sector

CTN :45681142

09 Jul, 2026 NA

West Champaran - Bihar

Tender For supply of spares and servicing of batch type centrifugal and continuous machine at hbl plant sugauli, east champaran and lauriya, west champaran, bihar - ht bolt full threaded (12x40mm) ht bolt half threaded (10x40mm) ht bolt full threaded (8x25mm) ht allenkey bolt (12x65mm) ss allenkey bolt (12x30mm) ss allenkey bolt (12x35mm) ss bolt (8x15mm) v-seal (alt-1) v-seal (alt-2) buffer pad nickel screen lock patti motor pulley suitable for 1600 rpm for nk 1100 rubber hose pipe (1/4 inch x 1mtr) rubber hose pipe (1/2 inch x 1mtr) rubber buffer rubber star plough up/down seal kit plough in/out seal kit mtc cylinder nozzle pipe (ss) set bottom valve up/down seal kit teflon segment v-seal (alt-1) v-seal (alt-2) massecuite distribution plate set taper wedge

Central Government/Public Sector

CTN :45678906

15 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For tender for supply of machining components as per hal supplied drawing - butt plate , butt plate , milled part , sheet , beam , wedge , wedge , wedge , wedge , cover plate , cover plate , lining , support , toothed plate , tooth plate , spacer , butt- plate , butt- plate , spacer , lever , milled part , bearing support , milled part rib 2 , milled part rib 2 , rib 14 , milled part , milled part , milled part , lever bearing , milled part , plate , milled part , milled part , milled rivet , milled part , cover plate , bracket , bracket , wedge , shim , fitting , fitting , cover plate , milled part , milled part , milled part , milled part , milled part , milled part , lining , lining , milled part , wedge , milled part , fitting , filler neck , plate , plate , lower fitting , safety mechanism , safety lock

corporations/Associations/Others

CTN :45659875

22 Jul, 2026 3.50 Lacs

Ajmer - Rajasthan

Tender For tender for supply of spare parts of tata bs4 and bs6 buses at rsrtc ajmer depot workshop - withdrawl plate tata bs iv, clutch lock huk type tata 1613, clutch fork patti assy tata 1613, clutch cone tata 1613, clutch fork setting bolt with pvc bush bs6, hose pipe clip ½", hose pipe clip 1", hose pipe clip 1 ¼", hose pipe clip ½" steel, hose pipe clip 1" steel, hose pipe clip 30/35 mm steel, hose pipe clip 40 mm steel, hose pipe clip 50 mm steel, hose clip tb-42, hose clip tb-44, hose clip tb-46, hose clip tb-48, hose clip tb-50, hose clip tb-54, hose clip tb-60, hose clip tb-84, front/rear spring center bolt with nut 10", rear spring center bolt with nut 12" tata 1613, lock bolt for shakle pin 1½ x 2¾, p.s. nut ½ bsf, p.s. nut ½ bsf nylon, p.s.bolt ½ bsf 1¾", rear hub lock bolt no.13, self stud with nut, turbo stud with nut, air tank drain valve nut, front wheel bolt tata 1613, rear wheel bolt tata 1613, wheel nut tata 1613, axle plate bolt tata m8x1.25x20, bolt 8 x 1.5 x 32, bolt half thread m8x50, bolt half thread m8x75, nut 8 x 1.5, bolt m10x1.5x30, bolt m10x1.5x45, bolt m10x1.5x50, cylencer bolt m10x1.5x125, nylon nut m10x1.5, bolt m12x1.5x45, bolt m12x1.5x50, nut m12x1.5, bolt m14x1.5x45, nylon nut m14x1.5, bolt m16x2x70, nylon nut m16x2, wedge screw tata with nut, water pump stud with nut 13 no tata bs4 (4" long), nut 13 no (flange / without flange), chamber nut 1613, axcelator rod end tata small type, axcelator rod end tata big type, axcelerator cable tata bs 3rd, kilometer gear set pvc set of 2 pcs, accelerator spring tata bs 3rd, battery terminal +ve / -ve, dimmer switch, electronic flasher 24 v, fuse 10 amp, fuse 15 amp, fuse 20 amp, fuse 30 amp, fuse 40 amp, fuse 400 amp, head light holder 3 pin type, head light holder of h-11 bulb, back light holder bs6, head light switch, wire 4 mm (1 roll=25 meter), wire 6 mm (1 roll=25 meter), wire 8 mm (1 roll=25 meter), v.c tape roll, push pull switch, patti holder, r.l.wire, starter push button n/m, toggle switch, t.t. horn assy 24 v, brake linner spring tata big, brake linner spring tata small, thurst washer front tata, front hub check nut tata 1613, front hub distance piece tata 1613, rear hub lock washer tata, rear hub check nut tata 1613, rear hub distance piece tata 1613, front hub shim tata, rear hub shim tata, front hub cotter pin tata, front derlin bush (brake cam bush 31 no.), fulcrum end spring, rear derlin bush ( brake cam bush 32 no.), roller for brake cam, brake linner spring small tata 1613, brake linner spring big tata 1613, brake cam lock tata 1613, brake cam shim tata 1613, cmc assy 29066421, csc assy 29066722, kit major 29967275, kit major 29967053, kit 29967221, kit29967320, cmc assy 29067016, csc assy 29066553, cmc kit 29967278, brake lining rivit alluminium (set of 80 pcs), brake linner front tata 1613 std (4 pcs with rivets), brake linner front tata 1613 1st (4 pcs with rivets), brake linner front tata 1613 2nd oversize (4 pcs with rivets), brake linner rear tata 1613 std (4 pcs with rivets), brake linner rear tata 1613 1stoversize (4 pcs with rivets), brake linner rear tata 1613 2nd oversize (4 pcs with rivets), brake linner front / rear tata 1618 bs-6 std (4 pcs with rivets), brake linner front/ rear tata 1618 bs-6 1st oversize (4 pcs with rivets), fan belt bs3 tata 1325, fan belt 8pk 1260, fan belt tata bs4 2525231463313 (aux13-1060), fan v belt tata bs4 2525 2314 6316 om600, air comp fan belt pulley bs4 without brg 6203, power steering filter plastic lock type, fuel filter fine big with ring tata 1613, b.l. bulb 24v dcsf, r.l. bulb 24v bs-6 (double point & d. filament ), fog lamp bulb 24v, head light bulb helogen 24v 43t 100/90, head light bulb helogen 24v 43t 75/70, head light bulb helogen 24v 45t 100/90, head light bulb helogen 24v 45t 75/70, head light bulb yellow 24v, meter bulb 24v, r.l. bulb 24v 2441, bulb fix type t-10, head light bulb h-1 bs-6, head light bulb h-11 bs-6, gear lever end assy l.h., gear lever end assy r.h., gear lever bracket

CTN :45543669

30 Jun, 2026 NA

Sonitpur - Assam

Tender For corrigendum : supply of jaq79080a,reverse clutch plate assy , jat79112b,pin for clutch link , jat79107,eye bolt for pressure plate , jat79096a,driving pin , jaq79079a,forward clutch plate assy , jat79113,set screw , jat89209,clamping plate for clutch , jat79250,collar on clutch shaft , jat79106 b,pin for clutch casing , jat79111,clutch link , jat79108b,fulcrum , jat79084 a,clutch ball liver , jat79241 b,bush , jat79239a,locking wire for clutch slide nut , jat79240,thrust bearing , jat79078,stud for clamping plate , jat79076,lock nut for clutch slide , jat79100,set screw , 57911,clutch pressure and spring assy , r450,rocker stud , r436a,locking washer , jat77902,clutch operating die , jat78169,pin for die , jat89412 2,lubricator with wick , jat89407,lubricator bracket lh , jat89406,lubricator bracket rh , jat89408,pipe clip on dust guard , jat89409,lubricator pipe for final drive , jat89411,brass tap 1 by 4 inch bsp , jaq77568c,top support bracket , jaq77572c,hand brake spindle bracket , jaq89167,foot brake pedal , jat89599,clamping pin , jaq77542a,foot brake lever top half , r12230063,foot pedal lever , jat77580, return spring for foot brake lever , jat77567e bearing nut for adjusting bolt , jat77577 spring for adjusting screw , jaq77558d,bottom foot brake lever , r12230062,lh brake shaft bracket with nuts, bolts and spring washer , jat77562e,pin with split pin , jat89600,fulcrum pin with slotted nut and split pin , r14230073,fulcrum pin with slotted nut and split pin , r13230072,foot brake lever for brake shaft pin , jaq77543a,foot brake lever on brake shaft , jaq78011 11,key for foot brake lever , jaf78416e 15a,rh brake shaft bracket 2 halves with nut and bolt and spring washer , jat77566,adjusting bolt , jaq77555b,double lever rh side , jaq77544a,double lever lh side , jaq78011 12,key for double brake lever , jat89606,bottom brake dowell , jat77578,hand brake spindle coller with split pin , jah89165,hand brake lever , jat77579a,hand brake trunion nut , jaq77569b,bottom guide plate , jafh77576b,brake strap complete , jah77583a,brake strap with lug , jaq89166a,set of brake lining , jaq89166a 1,lining 488 mm long , jaq89166a 2,lining 356 mm long , jaq89166a 3,lining 412 mm long , jat77589,supporting spring for strap , jaq89548,stud for brake strap screwed with brake shaft nuts and plain washers , jat77557d,pin for links foot brake lever , jaq78016 5,connector 1 by 8 inch , jat77582,pipe , jat77581,pipe , jaq78016 4,plate adopter for grease nipple , r14230116,link for simpson , r14230117,pin for simpson , 57712b,exhaust pipe , jat89597,u bolt for front support lower , jat89596,u bolt for front support upper , jat89048,clamp wedge for front support , jat89015,spacer , jat79161a,grub screw m12x1.25 , r347 2,head cover stud , r348,head cover nut , r14,felt washer , jat 89395,locking screw for front axle , r13140009,front roll bush grub screw cm6x20lg , jaq79165a,key , jat89017,locking pin , r13140003,bush for rear roll , r150,rear lamp bracket rh , jat89621,distance washer , 57658,loom panel to starter and dynamo , jaq78023,front lamp rh , jaq78024,head light assy lh , jah78439,lamp with //bid details 2 / 105 bulb 12v , jaf695358,instrument cluster , r10310108,instrument cluster , jat78029,horn 12v , r77 3,single cable clip , r77 2,multi cable clip , 57740,cable14 012 red for lh tail lamp , 57740,cable 14 012 black for rh tail lamp , 542492,fuse 10a blade fuse 10a

CTN :45657126

03 Jul, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of feed pump , injector , hose feed pump valve port 3 , hose pipe valve port 4 , hose filter valve port 2 , hose to valve port 1 , solenoid assembly 12v , solenoid 12v 45t , ignition switch , bottom screen filter , fuel tank stainer , main fuel pipe , tark sheet , gate valve seat turbo charger , clutch to oil cooler in out hydraulic pipe 36 inch , clutch to steering pump pipe line 32 inch , lifting pump , window lock , window strip , hour meter gauge , window cylinder , rock breaker pipe , front excel seal , glass front left side window , glass rear left and right side window , glass top rear door , glass bottom rear door , glass rear right side , teeth , wedge * /bid number : gem/2026/b/7699565 + /dated: 23-06-2026 ' ' / bid document 1 / 22

Backrest Lock Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

State Government

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others