Latest bagasse baling Tenders | Government bagasse baling Tenders

Central Government And Public Sector

CTN :45707474

11 Jul, 2026 70.90 Lacs

Chittorgarh - Rajasthan

Tender For preparation of temporary scaffoldings, material handling jobs, maintenance and testing of material handing equipments and tools etc

State Government

CTN :45359061

29 Jul, 2026 34.68 Crore

Hyderabad - Telangana

Tender For corrigendum : design, engineering, procurement, material selection, manufacturing, inspection at vendor or subvendors works before dispatch, packing, shipping, delivery at site for indigenous equipment, insurance, unloading, handling and storage at site, assembly, erection, testing, commissioning, successful performance guarantee, handing over of the substation , power supply distribution system, illumination and street lighting system, providing diesel generator sets for extending alternate power supply at various locations in ytps colony town ship including residential and non-residential complexes with all accessories, mandatory spares, tools and tackles for ytps (5x800mw) colony township at veerlapalem (v), damercherla (m), nalgonda district of telangana, india

Central Government/Public Sector

CTN :45724067

08 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of pway scrap - condemned u/s cl.iii rail 52 kg -2129.530 mtrs quantity - 110.501 mts. ds8 no.029658-25-00005 dt. 02.03.2026. custodian - sse/pw/tvt location - at tnpm yard 'a' frame in between tnp/1042 - tnp/1046 near gang room 7 & 8 in sse/pw/tvt section. note- 1)delivery to be made on linear measurement basis. 2)when scrap rails for delivery on sectional weight basis are longer than 5 metres, to facilitate loading, purchasers [by engaging his own labourers] are permitted to cut the rails to convenient lengths of not less than 2.5 metres. 3) any type of road vehicle is permitted for loading of lot material. however, depending upon the lot location, on the date of delivery, the custodian shall decide on granting such permission, strictly observing all prescribed safety precautions.. 4)any clarification in location/ ds8 no & date - manual ds8/inspection report may be reffered with custodian(lot quantity column in catalogue/do is authentic. 4) purchaser has to ensure that lorry, crane , labour are arranged well in advance before effecting inventory of the lot(wherever applicable). 5)custodian should arrange to issue hard copy(phostat) of ds8s,do, etc.,(only essential documents) to all witnessing officials at the do location before taking inventory. purchaser is not responsible for handing over of do/ds8 copies. 6)nfs - as per udm/manual ds8/lot inspection report. any other attachment, to be cut and hand over to custodian. any other nfs material in the lot other than items earmarked for sale, should be handed over to custodian at the time of delivery. purchaser should register delivery point request 3 days in advance.

State Government

CTN :45695323

09 Jul, 2026 38.98 Lacs

Raichur - Karnataka

Tender For a)materials shall be supplied as per the technical specifications mentioned in the price schedule.b)the joint inspection for the supplied materials shall be carried out after receipt of the materials to rtps/kpcl site.c)the handing over of materials at kpcl stores and shifting of supplied materials to site location will be under the scope of bidder/agency only.d)the agency/contractor shall commence his work immediately after handing over of work front by kpcl.e)the work (material supply, installation and commissioning) shall be completed on or before the stipulated contract period otherwise penalty will be imposed for the delay made.f)the agency/contractor should complete the work as per the kpcl requirement.g)the required t&p and ppe for carrying out maintenance works shall be arranged by the contractor/agency itself.f)it is the single point responsibility of the agency/contractor to provide any additional accessories and consumables required for the satisfactory completion of the work.

Central Government/Public Sector

CTN :45442232

03 Jul, 2026 NA

Ukai - Gujarat

Tender For corrigendum : balance work of cni package of rnm of unit 3 of ukai tps - balance work of electrical and c&i system, handing over material to customer, site stores/storage yard, transportation to site of work, complete erection, calibration, testing, commissioning and handing over of electrical and control & instrumentation works for boiler and its auxiliaries and turbine and its auxiliaries for renovation & modernization of ukai r&m u#3 (200mw)

CTN :45672362

10 Jul, 2026 16.57 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For erection and fabrication work a c c - mill mein lage scraper hetu discharge chute ke jo bhag kamzor evam kat gaye hain. unhe kaatkar hatana tatha nai 12 mm ki plate se taiyar kar punah sthapit karna. sath hi scraper ko baandhne hetu profile ke anusar hole wali plate lagakar/welding karke fix karna evam karya poorn hone ke pashchat trial dena. , cane carrier ke gale/ghise runner base ko kaat kar hatana. 100 mm ke channel se box banakar runner base ko lagana evam fit karna va purane channel ko nikal kar seedha karke palat kar lagana. , cane unloader ke purane ghise/kate 40/50 mm size ke sq. bar ko kaat kar hatana tatha yathasthan poorv ki bhanti naye sq. bar ko lagana evam santoshjanak trial dena. , cane carrier/rake carrier/bagasse elevator/r.b.c. ke ghise/kate runner ko kaatkar hatana. uske sthan par purane ko palat kar athva naye runner ko poorvanusar lagana. , cane carrier/rake carrier/r.b.c. ityadi chains ke side ki kati/ghisi/kamzor plate ko kaatkar hatana. uske sthan par purani athva nai plate ko lagana. , fibrizer hood ki side ki ghisi/kamzor plates ko kaatkar nikalna tatha yathasthan nai plate ko lagakar andar va bahar se welding kar santoshjanak trial dena. , bagasse baling machine ki sampoorn overhauling. testing evam trial dena. , s.r.c./i.r.c. ki purani racks ki vanchhit marammat karna. , bagasse elevator/r.b.c. ki chains ki nai racks sample anusar taiyar karna. , t.r.p.f. ke gale/kamzor bottom/top cover ko badalne ke liye naye cover poorvanusar banakar lagana evam santoshjanak trial dena. , s.r.c./i.r.c. ke gale/kamzor tail end boots ko kaatkar hatana tatha sample anusar 8.0/10.0 mm moti purani/nai plate se taiyar kar lagana evam leak.proof welding kar santoshjanak trial dena. , cane unloaders ke panjon ke vibhinn parts ko dismantle karna. dismantle kiye gaye grabs ke sabhi parts ki vanchhit marammat karna. fingers par nirdeshanusar hardfacing kar panjon ka punah assembly karna. , mills ke compound imbibition hetu lagi juice tray mein se gali/kamzor juice tray ko kaatkar hatana. nai plate se sample anusar taiyar kar yathasthan lagana evam samast connection karna. , cane carrier/s.r.c./i.r.c. tatha bagasse elevator chains ko upar uthne se rokne ke liye lagi hui guides mein se ghisi/kamzor guides ko kaatkar hatana. nirdeshanusar nai guide taiyar kar yathasthan lagakar santoshjanak trial dena. , cane unloaders ke bridge/trolley drive ke ghise/kate wheels ko nirdeshanusar welding karna. , t.r.p.f. ke gale/kamzor donali chutes ko kaatkar hatana tatha purane anusar naye donali chute fabricate kar yathasthan erection karna. , cane carrier ke liye lagi idler wheel par nirdeshanusar m.s. ke ring fabricate kar lagana. , mill head stock evam t.r.p.f. head stock ke beech nirdeshanusar 25.0 mm plate se support banakar lagana. , fibrizer ke purane hammer shanks ko nirdeshanusar welding evam hardfacing kar marammat karna evam balance karna. , cane chopper/leveller ke gale hue/kamzor hoods ko kaatkar hatana tatha nai plate se naya folding type banakar lagana. , fibrizer ke pocketed type anvil plate ki pockets ki tooti plates ko nai plates se badalna. mudi hui plates ko seedha karna tatha welding kar taiyar karke nirdeshanusar hardfacing karna. , cane leveller/chopper ke rotor assembly ki ghisi hubbo ke working side evam top sides ko welding kar samatal karna evam nirdeshanusar hardfacing karna. , cane unloaders par lage reduction gear evam motors ke kamzor beds ko kaatkar naye modify karke naye bed banakar lagana tatha gear evam motor ka alignment kar trial dena. , cane carrier ki structure ke gale/kamzor columns ko nirdeshanusar plate lagakar welding kar majbooti pradan karna. , mill rollers mein sample anusar juice ring fabricate kar fit karna. , t.r.p.f. evam mill ke beech mein lage pressure chutes ki vanchhit marammat karna. , mills ke gale/kamzor juice receiving tank ko kaatkar hatana. 8.0/10.0 mm moti plate se sample anusar tank fabricate kar yathasthan fit karna evam samast connection kar leak.proof trial dena. , mill ke ju

Central Government/Public Sector

CTN :45632822

30 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For providing of custom bid for services - works contract for collection and handing over of spares material as per pfr in swm shop

CTN :45605640

25 Jun, 2026 NA

Surat - Gujarat

Tender For rate contract for (1) contract for loading sugarcane on cane carrier, (2) contract for transporting boiler ash and fly ash by contractor's equipment, (3) contract for removing bagasse and loading firewood by contractor's equipment, (4) bagasse baling, (5) contract for working of sugar house and emptying lime and sulphur, (6) contract for working of sugar godown, (7) contract for transporting loose biocompost and soil protector plus fertilizer (packed in bags), (8) contract for making biocompost from pressed mud and filling it in guni, (9) contract for 24 hours for transporting pressed mud (per ton) by contractor's equipment, (10) contract for yard cleaning, (11) contract for cleaning of evaporator and juice heater tubes, (12) shift contract for making lime and bringing sulphur from sulphur godown and feeding it to the furnace, (13) contract for spraying biocompost fertilizer in the fields of members through contractor's equipment

Central Government/Public Sector

CTN :45592853

08 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of pway scrap - condemned u/s cl.iii rail 52 kg - 2697.46 mtrs quantity - 139.971mts. ds8 no.029520-26-00003 dt. 25.04.2026. custodian - sse/pw/cj location - at arakkonam , inside flash butt welding shop (fbw) in sse/pw/cj section. note- 1)delivery to be made on linear measurement basis. 2)when scrap rails for delivery on sectional weight basis are longer than 5 metres, to facilitate loading, purchasers [by engaging his own labourers] are permitted to cut the rails to convenient lengths of not less than 2.5 metres. 3) any type of road vehicle is permitted for loading of lot material. however, depending upon the lot location, on the date of delivery, the custodian shall decide on granting such permission, strictly observing all prescribed safety precautions.. 4)any clarification in location/ ds8 no & date - manual ds8/inspection report may be reffered with custodian(lot quantity column in catalogue/do is authentic. 4) purchaser has to ensure that lorry, crane , labour are arranged well in advance before effecting inventory of the lot(wherever applicable). 5)custodian should arrange to issue hard copy(phostat) of ds8s,do, etc.,(only essential documents) to all witnessing officials at the do location before taking inventory. purchaser is not responsible for handing over of do/ds8 copies. 6)nfs - as per udm/manual ds8/lot inspection report. any other attachment, to be cut and hand over to custodian. any other nfs material in the lot other than items earmarked for sale, should be handed over to custodian at the time of delivery. purchaser should register delivery point request 3 days in advance.

Central Government/Public Sector

CTN :45592854

08 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of pway scrap - 1) cond. u.s weighment rails cl.iii- sej stock rail 52kg -1 no, glued joint -60kg - 18 nos, check rail-90r -2 nos, built up crossing-52kg-7 nos, check rail-52kg-7 nos, point tongue rail 52kg-7 nos, glued joint 52kg-4 nos,point tongue rail -60kg, point stock rail-60kg-14nos, wing rail 52kg-2 nos, check rail-60kg-3 nos, rail 60kg, attached rail 60kg - 0.91, 0.20, 0.24 - 1.35 mtrs, attach rail 52kg - 0.94 mtrs, qty.- 28.900 mts. ds8 no.029592 - 25 -00011 dt.14.03.2026 location - km nmts/10 - nmts/12 aip yard opp of temple in sse/pway/pon section. note- i]delivery to be made on actual weighment basis. ii]when crane loading is not possible, the purchaser [by engaging his own labourers] is permitted to cut rails to loadable sizes of not less than 150 kgs. iii.] purchaser [by engaging his own labourers] is permitted to cut rails and hand over the excess quantity to the custodian. 3) any type of road vehicle is permitted for loading of lot material. however, depending upon the lot location, on the date of delivery, the custodian shall decide on granting such permission, strictly observing all prescribed safety precautions.. 4)any clarification in location/ ds8 no & date - manual ds8/inspection report may be reffered with custodian(lot quantity column in catalogue/do is authentic. 4) purchaser has to ensure that lorry, crane , labour are arranged well in advance before effecting inventory of the lot(wherever applicable). 5)custodian should arrange to issue hard copy(phostat) of ds8s,do, etc.,(only essential documents) to all witnessing officials at the do location before taking inventory. purchaser is not responsible for handing over of do/ds8 copies. 6)nfs - as per udm/manual ds8/lot inspection report nfs- as per tms /ds8 uploaded in tms. any other attachment to be cut and hand over to custodian. any other nfs material in the lot other than the items earmarked for sale should be handed over to custodian at the time of delivery.

Bagasse Baling Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors