Latest bagasse handling machine Tenders | Government bagasse handling machine Tenders

Central Government/Public Sector

CTN :40754113

02 Jul, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : custom bid for services - non-core maintenance activities in m&s-1. the scope of work includes carrying out the following non-core activities of maintenance and services department at bhelpppu, thirumayam as per instructions of maintenance in-charge. as per bhel estimate, it requires indicative 2 no. of unskilled labours daily to complete all the below activities. 1. cleaning of machines, components, oil spilled area during and after maintenance. 2. movement of spares, components and consumables for maintenance. 3. maintenance assistance for heavy works. 4. handling of lubricants, hydraulic oil, gas cylinders and diesel. contractor's scope: aa) cleaning of machines, components and oil spilled areas during and after maintenance: 1. cleaning of sub-assemblies and dismantled components while attending the break-down of machines. 2. cleaning of machine bottom floor, facility bottom floor and hydraulic power pack surrounding area as and when required. 3. cleaning of the machine surface and other accessories & fixtures of the machines for trouble shooting and to access the machine components during maintenance. 4. cleaning of the machine, floor area after attending the breakdown. all the spillage oil, oil soaked cotton waste, refractory wastes and other scrap wastes generated during maintenance to be removed from the surroundings of the machine and moved to the waste bins. 5. cleaning of oil, chips and dust inside and outside machine pit and intricate areas of machines while attending maintenance. 6. cleaning of machine components, filters and stand-by sub-assemblies with suitable cleaning agents. 7. cleaning of machines under shifting and assisting the fitters & electricians for dismantling, shifting and re-erection activities. 8. cleaning of crane parts at the top of the cranes and at the floor level are to be done as per instruction of maintenance in-charge. bb) movement of spares, components and consumables for maintenance: 1. movement of machine components from machine area to work bench and vice versa. 2. movement of raw materials for spares manufacturing to the respective machine shop. 3. movement of spares, consumables, raw materials, gas cylinders, etc., from stores to respective maintenance sections/areas and vice versa. 4. movement of heavy duty cables and cable drums from storage area to work place and vice versa. 5. movement of waste / scrap material to the respective disposal area. 6. movement of crane parts and lifting tackles during maintenance and for testing. 7. movement of furnace castings, refractory bricks, castables, refractory cement, ceramic wool, etc. for furnace maintenance. cc) maintenance assistance for heavy works: 1. assistance in activities like cable laying, dragging, winding, etc. 2. loading & unloading of lpg cylinders, refractory materials, machine parts, etc. from transport vehicles. 3. assisting in loading & unloading of machines / machine parts during erection and shifting of machines as and when required. 4. assistance in various maintenance activities involving heavy works like tightening / loosening of heavy duty fasteners, removal & assembly of heavy bearings, etc. 5. handling of heavy parts of the machine during maintenance. dd) handling of lubricants, hydraulic oil, gas cylinders and diesel: 1. cleaning of lubrication and hydraulic system of machines fairly without any oil traces. 2. assisting fitters for changing the worn out/damaged parts such as hoses, valves, high pressure pipe fittings, filters, etc., while doing maintenance of the systems. 3. assisting in oil top up/replacement with proper grade of oil in the respective hydraulic / lube oil tanks and gear boxes in the machines / equipments. 4. assisting in greasing of machines, cranes and facility items at pppu. all greasing points in the plummer blocks, pillow blocks, guide ways, machines greasing points are to be filled with necessary grade of grease manually or using grease gun wherever possib

CTN :40855234

07 Jul, 2025 26.40 Lacs

Nawabganj - Uttar Pradesh

Tender For providing of hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; - work of providing jcb , labour, electrician and other material on hire for removal of illegal occupation and demolition by kda..

State Government

CTN :40638680

03 Jul, 2025 15.00 Lacs

Mumbai - Maharashtra

Tender For corrigendum : contract for the work of material handling i.e. loading/unloading/stacking and transportation of material/equipment s weighing from0 to 2mt and 2mtto 9mt per vehicle within the jurisdiction of mumbai metropolitan region for airoli major store, airoli/all sdns of vashi dn/vashi dn store and from vashi dn store/airoli major store to all over maharashtra and vice versa for rs. 15 lacs

CTN :40825639

16 Jul, 2025 27.25 Lacs

Raebareli - Uttar Pradesh

Tender For providing of custom bid for services - hiring of 70 or 80 feet trailer with driver on rental basis for material handling at different stages of shell shop as per scope of work for 600 days

CTN :40821460

08 Jul, 2025 NA

Multi City - Rajasthan

Tender For requirement of safety, rescue and security items for ssctps fy 2025-26, suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap, gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch), barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5, chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160, acid/ alkali proof gloves having size of 18 inch with palm m, normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton, fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics, safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white, safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green, impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003, foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592, carry sheet ( stretcher)l x b: 212 x 75 cm with self weight 1 kg , load limit 159 kg , lift type: horizontal, wind indicator made of light weight pu coated nylon material. double stitch at all joints. plastic eyelets gives anticorrosion proper ties. the complete wind sock comes with a polymer packing. 2 dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe., ear plugs corded epsav-570, nose/ dust mask rpsav -p2, flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164, vapour respirator with head stripes to accommodate twin cartridges with exhalation valve, safety net consisting of pp rope dia: 4mm, mesh size: 100 mm,outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr, ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a), heat shield hand gloves made of normal and tannedsplit leather of reddish brown colour. insulating thermalbarrier as inner layer gives heat protection upto 250 degrees.thumb re inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344, insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991, electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991, hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350 c temperature.it should be atira tested for 250 c splash, tested to iso 5025,9151,6942,9185 and en 1875-3, chemical splash goggles with indirect ventilation, protect against splash and a hard coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003, chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003, elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv, chemiflex latex gloves, length-300 mm, en size- l coating material- natur

CTN :40808350

04 Jul, 2025 13.22 Lacs

Ganganagar - Rajasthan

Tender For requirement of safety, rescue & security items for ssctps fy 2025-26,suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap , gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch) , barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5 , chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160 , acid/ alkali proof gloves having size of 18 inch with palm m , normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton , fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics , safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white , safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green , impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003 , foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592 , carry sheet (stretcher) l x b: 212 x 75 cm with self weight 1 kg, load limit 159 kg, lift type: horizontal , wind indicator made of light weight pu coated nylon material. double stitch at all joints. , plastic eyelets gives anticorrosion proper-ties. the complete wind sock comes with a polymer packing. 2" dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe. , ear plugs corded epsav-570 , nose/ dust mask rpsav-p2 , flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164 , vapour respirator with head stripes to accommodate twin cartridges with exhalation valve , safety net consisting of pp rope dia: 4mm, mesh size: 100 mm, outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr , ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a) , heat shield hand gloves made of normal and tannedsplit leather of reddish-brown colour. , insulating thermalbarrier as inner layer gives heat protection upto 250 degrees. thumb re-inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344 , insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991 , electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991 , hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350c temperature.it should be atira tested for 250c splash, tested to iso 5025,9151,6942,9185 and en 1875-3 , chemical splash goggles with indirect ventilation, protect against splash and a hard-coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003 , chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003 , elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv , chemiflex latex gloves, length-300 mm, en si