Latest balancing disc Tenders | Government balancing disc Tenders

corporations/Associations/Others

CTN :45492755

24 Jun, 2026 19.95 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of balancing disc of bfp 200khi , bearing disc. of bfp 200khi , thrust collar of bfp 200khi , bfp bearing journal bearing, ss ds , balance drum 200khis , balance drum liner of bfp 200khis , thrust collar of bfp 200khis , thrust nut of bfp 200khis , o ring for bfp cartridge assy. body 200khis , o ring for suction side cartridge assy. 200khis , balancing drum o ring 200khis , oil ring of bfp motor bearing mat. brass , oil guard of bfp , labyrinth seal of motor bearing of bfp, material - aluminum

CTN :45499126

26 Jun, 2026 1.35 Lacs

Nanpara - Uttar Pradesh

Tender For supply of feed pump spares - shaft with keys , sp sleeve lh , sp sleeve rh , o ring for sp sleeve , spacer sleeve suction , o ring for stage casing , stage sleeve , balancing disc , counter balancing disc , gasket set

State Government

CTN :45466096

15 Jun, 2026 30.00 Lacs

Siwana - Rajasthan

Tender For annual rate contract for provding new water service connection with material under division siwana - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement fo

State Government

CTN :45418513

23 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For supply of kids play item - kids play equipment, double swing (2-seater swing), four seater swing, double swing 4 seater, multi-seater circular swing (merry-go swing), 8-seater merry-go- round (mgr), elephant rider, animal swing (single/double seater frp animal shape), elephant slide, double see-saw, 10-seater round merry-go- round (large mgr), adventure tyre climbing., commando net climbing, adventure patiya (wooden plywood) walk, adventure tyree walk, kids multiple adventure play zone 3 in one, leg press double, triple twister, horse rider dimensions, outdoor double air walker, dinosaur shape slide, seater round chakri main frame, leg press machine (seated), bench press two seater, chest press (seated) double, parallel bars, sit-up bench / inclined board, rowing machine, cycle (air bike), swinging bridge, ladder crossing, tyre swing, small siwing, net crossing, burma bridge, tyre walk, double twister, shoulder wheel /rotation, single twister, chest press singal seater, arm and paddle bike, kids multiple play zone 4 in one, giraffe slide big, rocker, satellite climber, jumbo spiral slide, 3 piece tunnel slide, double slide fun, theme based decorative dustbins, rcc garden bench three-seater, iron 3-seater garden bench

corporations/Associations/Others

CTN :45099274

01 Jun, 2026 19.95 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of balancing disc of bfp 200khi , bearing disc. of bfp 200khi , thrust collar of bfp 200khi , bfp bearing journal bearing, ss ds , balance drum 200khis , balance drum liner of bfp 200khis , thrust collar of bfp 200khis , thrust nut of bfp 200khis , o ring for bfp cartridge assy. body 200khis , o ring for suction side cartridge assy. 200khis , balancing drum o ring 200khis , oil ring of bfp motor bearing mat. brass , oil guard of bfp , labyrinth seal of motor bearing of bfp, material - aluminum

corporations/Associations/Others

CTN :45345525

15 Jun, 2026 11.87 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of oh of bfp upto balancing disc , inspect or rect of fault of bfp mtr de brg , inspect or rect of fault of bfp mtr nde brg , inspect or rect of fault of bfp suc end brg , inspect or rect of fault of bfp dis end brg , oh of bfp booster pump , complete oh of cep , bfp lub oil clr ht or oil or stm wash of bunch , bfp wkg oil clr ht or oil or stm wash of bunch , clean of bcw cooing line of bfp bstr , revision or check of tube of swc heat exch , revision or check of tube of bcw heat exch , revision or check of tube of sw heat exch , clean of str of cep a or b or c , oh of cw bstr pump , oh of h2 gas cooling pump , oh of bcw pump , oh of swc pump , oh of sw pump , oh of hdrazene dozing pump , oh of phoshphate dozing pump , clean of suc str of bfp , clean and inside paint of cond recov tank , clean and inside paint of cst , clean and inside paint of bcw tank -4 mtr , clean and inside paint of bcw overhead tank , clean and inside paint of phoshphate tank , clean and inside paint of hydrazene tank , clean and inside paint of swc tank , oh of internal of hyd cplg , fab or repl of bfp cooling hdr inlet , fab or repl of bfp cooling hdr outlet , oh of drip pump , alignment of hyd cplg with mtr and pump , cleaning of cooling line of drip pump , revision or repl of worn out thrust pad bfp , fab of seal wtr clr body and fit tube nest , repl of inside stator assy of bfp , re adjust of brg for repl of bfp motor , straightening of cep shaft and rect thread , fab of expander bellow and fitting , installation of fab seal wtr cooler , installation of overhauled cep , install or erecction of fab or rep lub oil clr , installion of sw heat exchanger , inspec or rect of cep brg , revision and check of cntl block of scoop , oh of air washer blower , oh of air washer pump , tank clean or repl of nozle oh filter and valve ) /bid number : gem/2026/b/7549166 * /dated: 27-05-2026 & & / bid document 1 / 31

CTN :45332612

16 Jun, 2026 33.06 Lacs

Bardhaman - West Bengal

Tender For supply of kbl mla impeller 100x125 , oil ring bearing with oil ring for kbl make mla 100x125 model pump , shaft sleeve ds mla 100x125 , shaft sleeve nds mla 100x125 , split bush lantern ring impeller for kbl make 100x125 model pump , split gland bush lt br for kbl make mla pump model 100x 125 , casing ring for kbl make pump mla 100x125 model , interstage bush for kbl make pump mla 100x125 model , balancing ring, bronze , balancing disc , pump shaft for 3 stage for kirlosker make mla 100x125 pump , pump shaft for 4 stage for kirlosker make mla 100x125 pump , pump shaft for 5 stage for kirlosker make mla 100x125 pump , pump shaft for 6 stage for kirlosker make mla 100x125 pump , rotatingassembly 3 stage kbl make mla 100 x 125 pumps , rotating element 4 stage 100 x 125 kbl mla 4 , rotating element 5 stage 100 x 125 kbl mla 5 , rotating assembly 6 stage kbl make mla 100 x 125 pumps , rotating element 6 stage for mnp make pl ii model pump , rotating element 5 stage formnp make pl ii model pump , rotating element 4 stage for mnp make pl ii model pump , rotating element 3 stage for mnp make pl ii model pump , rotating element 6 stage for mnp make pl i model pump , rotating element 4 stage for mnp make pl i model pump

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

CTN :45294255

26 May, 2026 14.24 Lacs

Pune - Maharashtra

Tender For auction sale of plot - all that piece and parcel of the property bearing plot no. 16-17-18/b-c-2, area admeasuring about 64.80 sq. mtrs., having revenue survey no. 179 which was recorded under city survey sheet no. 103, chalta no. 2, city survey no. 257/16-17-18 together with construction thereon situated at near the ghanghali railway crossing near the swaminarayan gurukul, beside patel farm, village-sihor, taluka- sihor and district-bhavnagar, gujarat. property bounded as under; north: plot no. 16, 17, 18/b-c/1, south: plot no. 16, 17, 18/b-c/3, east: 07.60 mtrs., wide road, west: adjoining plot no. 23, 24 and 25, owned by makwana gavuben dayabhai, makwana umeshbhai dayabhai, makwana rahulbhai dayabhai

CTN :45236324

06 Jun, 2026 4.20 Crore

Pune - Maharashtra

Tender For supply of category vi cardio and interventional radio consumables - intra vascular lithotripsy balloon for coronary usage in highly clacified lesions,assorted sizes, sirolimus coated balloon,phospholipid carrier to avoid drug shedding,nanolute technology,100% balloon surfece technology,low crossing profile,assorted sizes, ptca guide wire with tip load 0.8gm and spring coil length 20 cm and one piece core wire with joint less spiring coil and slip coat (hydrophilic coating) over the 20 cm spiring coil, ptca guide wire length 180 cm with tip load 1.0 gm with polymer sleeve length 22 cm with slip coat (hydrophilic coating) and one piece core wire with joint less spring coil., ptca guide wire with tip load 0.8 gm and polymer sleeve length 16 cm with slip coat (hydrophilic coating) and diameter of wire 0.014 inch with tapered tip of outer dimeter 0.0009 inch (0.23mm)., cto ptca guide wire length 150 cm with tip load 1.7 gm and micro cone tip for superior penetration and composite core contruction with multiple wire components., inflation device (indeflator) kit for angioplasty ., high pressure 2 port manifold., angioplasty kit (insertion tool,y adaptor and torque device)., coronary control syringe with ring plunger grip 12 ml., inoue percutaneous transve-nous mitral commissrotomy balloon complete with accessories sizes-26, ptca guidewire with tip load 0.5 gm and silicon coating on distal 1.5cm and slip coat (hydrophilic coating) of 18.5 cm after silicon coating from the tip 1.5 cm with composite core contraction with multiple wire components comprising of rope coil and twist wire mounted on the core wire.

Balancing Disc Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government

corporations/Associations/Others

corporations/Associations/Others

State Government