Latest ball bering Tenders | Government ball bering Tenders

Corporations And Associations And Others

CTN :41289329

13 Aug, 2025 88.02 Lacs

Delhi - Delhi

Tender For supply and installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi and chandni chowk for various locations of parks in municipal corporationof delhi - supply & installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi & chandni chowk for various locations of parks in municipal corporationof delhi, supply and fixing of four seated merry go round. area: 1.5 m. height 0.8 m. seat moulded f.r.p. main frame: 40 nb g.i. pipe. bearing : heavy duty bearing. ms plate: 250x10mm. support pipe- 80nb. the topcoat is duly powder coated. the item shall be having its main frame made up of 25 & 40. mm nb b class g.i. pipe. the stand shall be made in 80 mm nb b class g.i. pipe. the whole structure shall be mounted on heavy duty bearing shaft. the bearing used shall be of heavy duty bearing permanently lubricated with water sealant. the seat frame shall be made out of frp (fibre reinforced plastic)/lldpe (low linear density ploy ethylene). the seats shall have handrails so that the child does not fall. it shall accommodate 4 children at a time. the powder coating shall be done on the pipes to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of arch swing. leg support : 80 mm nb pipe, seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 3.0 m x 2.5 m. height : 2.5 m. top bar : 60 mm nb pipe. suspension : 6 mm rubber coated chain. the topcoat is duly powder coated. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat / u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chairn. the bail bearings shall be mounted inside a specially designed nylon clamp. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gi chain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat

CTN :41186105

04 Aug, 2025 NA

Parganas - West Bengal

Tender For bid to ras tender for supply of nut , plug , retainer , bolt , flat-head screw , spring , valve , exhaust , screw plug , ojde spanner 12x14 mm , spring , elbow , o ring , o ring , seal bearing , ojde spanner 19x22 mm , o ring , o-ring , liner , lower , gasket(fig-1510 by 05) , bolt , key , ring seal , clamp , pin dowel , lock , element filter , gasket , bearing needle , spanner , valve , adaptor , gasket , cable techo hour meter(fig-1045a) , element filter (ctlg fig-61) , strainer , ojde spanner 13x17 mm , spanner 10x11 mm (ojde open end) , spill tube , nut , seat , intake valve , insert , tihckness gauge allen key , 13 mm socket(sl no-g15313) , seat , exhaust valve , insert , seal , rod , spnr ojde 32x36mm , sensor oil pressure switch (fig-2010) , gasket , flange , clamp , clamp , plug , seat , set screw adjusting , hose , wrench hook(sl no-g15313) , gasket(fig no-3105) , fuse box cover , mc piping service kit , regulator & bush box assy , 22 mm socket(sl no-g15313) , o-ring , plate (fig-30) , lock , o ring (ms sl-120) , gauge , level , bolt , 27 mm socket(sl no-g15313) , seal , t handle 290mm , cap , pad rubber( fig no-5005 , sl no-13) , o-ring , seal , rectangular ring , o-ring , seal oil , lever , shaft , pto , bushing , aux diode(ctlg fig-10b) , metal ball(fig-4010 by 11) , lining brake , bushing , retainer , switch bty relay , cover , cyl .head (bd80 eng fig. no. 1150) , cover , body , adapter , tube , tube , wire harness , fuel pump , race inner 8b-5 by 150 , piston ring assy (containing 03 items) , race inner , scraper rh , hose(n743) , regulator (make lucas tvs)(ms) , gasket cyl head , lever , rod , cover , tube , injection no 1 , tube , injection no 2 , tube , injection no 3 , tube , injection no 4 , bearing ball , tube , element assy(fig-1410) , bit end rh (ctlg fig-7006) , tube , race inner , muffler , wire harness , front , shaft (os sl no-80) , plate main clutch (covered 04 plants) , puller 30 ton (ctlg sl-07) , hose , loose spring assy(fig 1015 , sl no-69) , operator seat assy , bracket , speedo meter (fig-12) , pulley , seat operators(ctlg fig-40) , bushing , gear driven 1st(fig-2125) , shaft intermediate , drive tachometer , bushing , gear driven reverse , seal ring assy , bracket lh , shaft , bushing , core assy , bonnet , arm , rocker assy , shifter clutch dog(price list sl-836) , bracket , bearing roller , oil pump assy , pressure spindle , oil cooler assy , fly wheel and rmg gear , starter motor assy self starter , power take off assy , flywheel assy(fig-2210) , frame lh (p-255)

CTN :41274944

11 Aug, 2025 32.14 Lacs

Baramulla - Jammu And Kashmir

Tender For supply of svl pd with integ power mgt sys - quick setting compound rapidite confirming to is specification. , natural sand. , aggregate 20mm. , aggregate 40mm. , load bearing concrete pcc soild blocks , integral water proofing compound , reinforcement. tmt steel bars 16 mm dia bar for rcc roof band , reinforcement. tmt steel bars 12 mm dia bar for rcc roof band , reinforcement.tmt steel bars 10 mm dia bar for rcc roof band , reinforcement.tmt steel bars 8 mm dia bar for rcc roof band , ms binding wire not less than 0.9mm dia annealed conforming to relevant is , ply wood 1.50m x 0.20 m and 12mm thick for shuttering of rcc roof band. , ply wood 10 mm thick as per requirement for flat surface , ismb 150 rsj 150 x 75mm 3.5 m long , ismb 150 rsj 150 x 75mm 1.20 m long , steel roofing trough srt of size 1630 x 613 x 180mm made out of 2mm thick hot , hdpe laminated sand bags of size 75 x 40cm sand colour and each bag having weight not less than 75 gms , pbs roll self finished tarfelt hessian base for water proofing grade- 1 . , silicone gel sealant of 01 pack of 400 gms including applicator gun , bitumen for filling of expansion joint of pcc , hdpe sheet having weight 100 gm sqm in black colour of width 5.50mm , pre fabricated steel window loop hole of size 600mm x450mm shall be provided with amn pd. , pre prefabricated steel door , pre fabricated steel shutter loop hole of size 2200mm x600mm shall be provided with svl pd. , pre fabricated steel shutter loop hole of size 1200mm x600mm shall be provided with svl pd. , ci grating of size 300 x 300 mm with frame not less than 4 kg. , pvc swr pipe 110 mm dia single socketed 3 mtr long , synthetic enamel paint colour og chocolate , red oxide primer conforming to relevant , oil bound distemper of approved brand. , thinner make asian berge shalimar. , chalk white , cement base paint. make duracem snowcem british xtracem , 10 mm thick base plate 400x400 for column , column ismb 250x175 56.90kg rm 3 mtr long , beam ismb200x100mm 25.40kg rm for first floor and roof 2.4 04 nosmtr long , beam ismb150x75mm 15kg rm for first floor and roof 2.4 04 nos and 2.2 04 nos mtr long , 8 mm thick ms plate connection between column and ismb 200x200mm , normal nut bolts 150mm long 16mm dia , 8mm thick ms plate for first floor 2.4 x 2.2mtr , 6 mm thick gable side wall ms sheet 14 nos 2.40x0.30m and 7 nos 2.20x.30m , ms steel angle 65x65x6mm 5.80kg rm for stair case , column shs 75x75mm 04 nos 3mtr length , beam shs 45x45mm 05 nos 2.40 mtr length , 8mm thick ms plate 150x150mm connection between column and beam , cgi sheet 3mtr x 1 mtr , 8mm thick ms plate 0.15 x 0.15mtr , normal nut bolts 150mm long 12mm dia , foundation bolt 450 mm long dia 16mm , pvc cable insulated and pvc sheathed 10 sq mm 2 core , switch socket combination 16 amp 3 pin , switch socket combination 5 6 amp one way , t w switch board 10 inch x8 inch , t w switch board 7 inch x4 inch , t w switch board 4 inch x4 inch , main swithch 32 amp two pole 240 v , change over switch 16 amp two pole 240 v conforming to is making havells standard , led tube light fitting 1x18 w 4 feet long complete with all accessories incl tube rod , led bulb 20 w , flexible wire twin core 23 00076 conforming to is 9537 pt iii 1983 , pvc conduit pipe 20 mm dia conforming to is 9537 pt iii 1983 , pvc l bend for 20 mm conduit pipe 20 mm dia , pvc round block squareblock rectangle block for mounting of switches socket etc. , ms screw 20 mm conforming to revelent is pkt of 100 nos , ms screw 25 mm conforming to revelent is pkt of 100 nos , tape insulation in 2 cm width 10 mtr roll confirming to isi 12714 , pvc saddle clip 20 mmconforming to is 3419 1976 , pendent holder bakelite , pvc insulated cable and pvc sheathed 2.5 sq mm 1 core copper conductor conforming to is 694 1990 , mcb 16 amp double pole 240v confirming to is 8823 1978 , mcb 6 amp two pole 240 v , mcb distribution bds 8 way single door with blank , switch socket combination 6 amp 3 pin , pvc junction box 2 to

CTN :41288345

14 Aug, 2025 NA

Nasirabad - Rajasthan

Tender For supply of 133a032 , t connector with box, 343b701 , uhm pad for introduction , hex connector for filling gun, , l bend for filling gun, 359b537 , back mounting for cylinders , brass block,230b938 kosncris , 230b956 yoke plate c plates for gd pt , ms block,230b955 , 230b896, centering base plate , 231b648, centering clamping plates , centering arm roller, 215b931 , manchete, 110651 , slide for cylinders, , clamping arm, , m10 stud rod , toggle joint , vibration damper, 153210 , complete centering assembly gd pt , mark iv cuc card 134362 , communication cable with lan end , cuc card cable for mk 4 , loadcell cable for double static checkscale , display, kosan mark iv cuc , key pad for cuc , load cell cable mark 4 , magnetic sensor,161a182,turck , clamp for magnetic sensor , inductive sensor , sensor cable 3 mtr , sensor cable 5 mtrs , sick optic sensor , sick reflective sensor , sick diffusive sensor , optical cable , lens for fiberoptic 2017400 , lot adopter , bearing skf 6024 2z , bearing skf 6016 2z , bearing skf 6304 2z , bearing skf 6305 2z , anchor bolt 10 mm , anchor bolt 12mm , anchor bolt 16 mm , ms nut and bolt m8 2.5inch , ms nut and bolt m10 1.5inch , ms nut and bolt m12 3.5 inch , ms nut and bolt m16 4 inch , allenkey bolt 4mm head , allenkey bolt 3mm head , screw for cuc card kosan , flat head allen key bolt 4mm head , glass section for pipeline 2 inch , gskt,sht,asbestos,4mm , gasket,sponge rubber , conveyor chain, riveted , pneumatic push button , pneumatic cylinder with teflon pad , pnuematic gun for service air , metal gasket for pipeline 0.5 inch , metal gasket for pipeline 1 inch , metal gasket for pipeline 2 inch , metal gasket for pipeline 3 inch , metal gasket for pipeline 4 inch , metal gasket for pipeline 6 inch , metal gasket for pipeline 8 inch , metal gasket for pipeline 10 inch , cir receiver mounted,110671 carousel , 48 head gun , cuc card display , g.d. cup lower bell , sealing machine cup , manual sealing machine cup , 131507 pd 948 pressure transmitter , pam 5kg gun set , toggle joint g.d. and p.t , boom dry chain , filling vot gun , filling lot gun , cylinder c96kdb40 300c smc , front plate keyboard cuc mkiv , guide road set , 48h module , 48h clutch , lifiting pad with bearing and bolt , gd_ pt clamping arms with rollers , lifter bearing skf 6301 2rs1 , bush bolt gd_pt , stopper roller double wheel , gas stop valve seal kit 48 head , makeen cuc load cell module mkiv 1 load cell ad box

CTN :41272547

07 Aug, 2025 13.07 Lacs

Multi City - Karnataka

Tender For material supply for construction of solid waste disposal unit of ramadurga village - rivapolyenthylene water storage tank of specified capacity l, rivahom of cutting and grinding machine 1, rivamechanic class iimechanic hmp grade ieme grade, rivaanticorrosive bituminous paint black, rivaball bearing hinges heavy duty, rivacast iron spike, riva40 6 mm ms plates, riva36 mm 6mm ms plates, riva16 16 mm ms square rod, riva50 mm dia ms hollow pipe b class 14 gauge, rivachlorinated polyvinyl chloride cpvc pipe 25 mm outer dia, riva100mm s or p trap, rivaindian type water closet of size 580 mm of specified make with footrests, rivatractor 40 hp, rivagravel 2.36 mmmurrum, rivapvc pipe of 4kgcum110 mm, rivalabour charges for handing errection of rcc rings etc 5, rivatransportation charges of rials beyond 5 km 10, rivafabrication charges, rivacost of 6 5mm ms coil, rivarcc cap 1000 mm dia 100 mm thick, rivatools & plants and electrical charges 2, rivaenamel metal paint, rivapainter class i, rivaready mi primer paint ready mi red lead paint, rivahom of cutting and grinding machine, rivaadd, rivahom of welding and grinding machine, rivawelder grade i, rivacorbon electrodes, rivaanchor bolts 750mm, rivabase plate base plate, rivagusset plates 6 mm thick, rivams angle iron 40mm 40mm 6mm 23 mtr in length at 3 5 kg per mtr, rivams angle iron 50mm 50mm 6mm 33.8 mtr in length at 4 5 kg per mtr, rivaweld mesh 75 25 mm of 6g to 10g, rivaadd providing and removing scaffolding at 3 on labour, rivaunit cost as per the specification, rivamathinandi wood scantling, rivaadd cutting and other wastage 5, rivamathinandi wood planks for panels 25 mm thick, rivaburnt bricks class 35 non modular, rivabinding wire, rivatmt bars fe 500, rivajungle wood runners and planks, rivastone chistler class ii, rivamason class ii with tools, rivamason class i with tools, rivamier concrete small used in culvert, rivaboulders, rivabond stone 20 20 45 cm, rivasize stone 20 20 25 cms, rivagranitetrap broken metal 100 mm and down size, rivaadd handling loading and unloading at 2 on rial, rivacasurina poles 100 150 mm, rivasilver oak or equivalent planks 38 mm thick, rivahom of vibrator 0 71 days, rivaplasticizer super plasticizer, rivaadd watering charges at 1 on rial, rivamier concrete 1 cum capacity, rivaportland cement, rivacoarse sand zone iii, rivabroken stone aggregate 12 mm to 10 mm size, rivabroken stone aggregate 20 mm size, rivabroken stone aggregate 40 mm size

CTN :41280859

21 Aug, 2025 NA

Jamalpur - Bihar

Tender For supply of 52kg pit line bearing plate and fitting per set as under 1. c.i. bearing plate 52kg as per rdso no. mrc/w/pw/1/2004 = 01 no. 2. 6mm thick grooved pad as per rdso no. mrc/w/pw/12-93 = 01 no. 3. 12mmthick g rubber pad 52kg as per rdso no. mrc/w/pw/10-93/52 = 01 no. 4. polyethylene insert as pe r rdso no. mrc/w/pw/14-93 = 04 nos. 5. ms spiral as per rdso no. mrc/w/pw/14-93 = 04 nos. 6. 28mm dia. anchor stud with nut (hot dip galvanized) as per rdso no. mrc/w/pw/14-93 = 04 nos. 7. punched w asher as per rdso no.mrc/w/pw/17-93 = 04 nos. 8. triple coil spring washer as per rdso no. mrc/w/pw /15-93 = 04 nos. 9. nylon ferrule as per rdso no. mrc/w/pw/16-93 = 04 nos. [ warranty period: 30 mo nths after the date of delivery ]

CTN :41252660

06 Aug, 2025 12.57 Lacs

Koppal - Karnataka

Tender For supplying materials to solid waste management unit at kolur village of koppal district - broken stone aggregate 40mm size., broken stone aggregate 20,mm size., broken stone aggreate 12, mm to 10,mm size, coarse sand (zone -lll), portland, cement., mixer (concrete) - 1,cum capacity., add watering charges, at 1 % on material., silver oak or equivalent, planks, jungle wood,runners and planks, casurina poles, 75 - 100 mm dia, add handling , loading and unloading at 2 % on material, casurina poles 100 - 150,mm, plasticizer, / super plasticizer., hom of vibrator 0.71, days., size stone, 20 x 20 x 25 cms., bond stone 20 x 20 x 45, cm, boulders,.,, mixer ( concrete small, used in culvert), mason class l (with tools), mason class ll (with tools), stone, chistler class ll, add watering, charges at 1 % on labor, tmt bars fe, 500, binding, wire, burnt bricks class 35, (non modular), add handling , loading and unloading at 1 % on material, t section,, mullion section,, ms clamps,, handles,, hinges 5 heavy duty,, stays,, tw beading for fixing glass,, reeded glass 2 mm thick,, z section,, fitter class l, welder grade, l, add,., ready mix primer paint (ready miix red lead paint), add wire brush, fine steel wool, putty , sand paper , at 3 % on cost of paint, painter class l, add providing and removing scaffolding at 3 % on labour, mathi/ nandi wood planks for panels 25 mm thick, add cutting and other wastage 5 %, hom, of machinaries for planing, mathi/nandi wood, scantling, broken granite, metal 12.5 mm., broken granite, metal 10 mm., weld, mesh 75 x 25 mm of 6g to 10g., ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length, at 4.5 kg per metre., ms angle iron 40mm x 40mm x 6mm, 23 metre in length, at 3.5 kg per metre., gusset plates, 6 mm thick., base plate / base plate.,, anchor, bolts 750mm.,, corbon, electrodes, hom of welding, and grinding machine.,, hom of cutting and grinding machine., enamel metal, paint, add brush at 1 % on cost of paint, tools and plants and electrical charges at 2%, unit cost as per the, specification., enamel paint.,, add brush , putty , sand paper , roller at 5 % on cost of paint, dia 50mm ms hollow pipe b class 14 gauge,., ms square rod,. 16 x 16 mm, ms plates,. 36 mm x 6mm, ms plates,. 40 x 6 mm, cast iron spike,., ball bearing hinges heavy duty.,, anticorrosive,. bituminous paint (black), mechanic class ll / mechanic hmp grade l/eme grade, hom of cutting,. and grinding machine - 1, tools and plants at 2 % on material, transportation loading,. and unloading at 1% on material, rcc cap 1000 mm dia , 100 mm thick, transportation charges of materials beyond 5 km at 10 %, cost of 6.5 mm m, s. coil, fabrication, charges, pvc pipe of 10kg cum,140 mm,., indian type water closet, of size 580 mm of specified make with footrests, trap, 100 mm, s or p, add white lead paint , gasket , cement , sand for making good the wall and floor at 2 % on material, tractor - 40 hp,., electrification,., display board,.

CTN :41203546

11 Aug, 2025 95

Davangere - Karnataka

Tender For motor reawinding items for kunebelakere gram panchayath harihara taluk davangere district - motr lifting charge /kunegp1, bladeset/kunegp1, statercoil/kunegp1, connector /kunegp1, volt meater/kunegp1, amps meater /kunegp1, capactershunderd ten to two hunderd ten/kunegp1, running thitry six m f dtwenty five m fd/kunegp1, capacater sfifty m f d/kunegp1, pump share /kunegp1, allentment washer /kunegp1, do bush/kunegp1, ipbush /kunegp1, pump soft twelve mm/kunegp1, single phase bole and impllie/kunegp1, single phase bole and imolliercora /kunegp1, single phase bole and imolliercora five/kunegp1, single phase bole and imolliercora four/kunegp1, moter bush /kunegp1, tp plate/kunegp1, moter changuard/kunegp1, moter cuppling/kunegp1, moter mess/kunegp1, cable guard12/kunegp1, thurstbearing plate/kunegp1, body circlife/kunegp1, eightmm allen key screw/kunegp1, eight x seventy five mm stud/kunegp1, flange eight mm/kunegp1, housingk /kunegp1, oil scale twenty five twenty and fourty /kunegp1, eight mm stud /kunegp1, eight x twenty mm stud /kunegp1, connector/kunegp1, stater coil /kunegp1, stater bladuset/kunegp1, stater relay /kunegp1, three crore foursgm m cable one meter /kunegp1, threecrore two and five sq mm cable one meter/kunegp1, sixmm copper wire one miter/kunegp1, star detta stater ltlk /kunegp1, nutral link/kunegp1, voltmeater/kunegp1, amps meater/kunegp1, auto stater/kunegp1, singleprawenter /kunegp1, pennal bord two x twenty one x two/kunegp1, fuse sixty three amps/kunegp1, stater do ltlk/kunegp1, pump patti twelve stage thirty two/kunegp1, pump patti ten stagetwenty nine inch /kunegp1, pump patti eight stage twenty three inch/kunegp1, pumpallen key screw /kunegp1, pump mess ss/kunegp1, flatewasher one pc ms/kunegp1, ten mm nut ms/kunegp1, stage slive twnty five xfifty xfive/kunegp1, stage slivetwnty five xfifty xfive/kunegp1, stge bush g m/kunegp1, do bush gm/kunegp1, ipbush gm /kunegp1, pump shoft twenty mmx twenty nine inch /kunegp1, pump shaft twenty mm twenty six inch ss /kunegp1, pump shoft twenty mm x twenty three inch ss/kunegp1, pump chavi twelve mm/kunegp1, pocanacter1/kunegp1, ip canacter /kunegp1, pump bole/kunegp1, motor bush gun mettel l b/kunegp1, water nut brass/kunegp1, water nut p v c/kunegp1, motor chavi guard brass /kunegp1, motor cuppling /kunegp1, motor chavi /kunegp1, motor messss /kunegp1, cable guard/kunegp1, rotory surclife one eight mm/kunegp1, rotory surclife twenty mm/kunegp1, thrust bearing plate/kunegp1, six inch body surclife/kunegp1, eight x thirty five m m stud /kunegp1, stud ten x seventy five mm /kunegp1, flange eight mm /kunegp1, flange ten mm/kunegp1, housing /kunegp1, oil seal/kunegp1, ten m m nut ss/kunegp1, stud ten x twenty five m m /kunegp1 , conacter three phase motor/kunegp1, water two h p motor reawinding single phase/kunegp1, water three h p motor reawinding single phase/kunegp1, water three hp motor reawinding/kunegp1, water five hp motor reawinding /kunegp1, water six hp motor reawinding/kunegp1, waterseven and half hpmotor reawinding/kunegp1

Corporations And Associations And Others

CTN :41255186

07 Aug, 2025 6.45 Lacs

Delhi - Delhi

Tender For providing and installation of children play equipments in municipal park near h.no.ru-335, ru block pitampura, ward no.57 under keshavpuram zone - providing and installation of children play equipments in municipal park near h.no.ru-335, ru block pitampura, ward no.57 under keshavpuram zone, supply and fixing of double arch swing.leg support :80 mm nb pipe. seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 6.0 m x 1.5 m. height : 2.6 m. top bar :50 mm nb pipe. suspension: 6 mm rubber coated chain. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat/ u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chair. the bail bearings shall be mounted inside a specially designed nylon clamp. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gi chain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of spiral slide. ladder-frame- 25m m n b pipe. handrail - 20 mm n b pipe. centre support- 50 mm n b pipe. area : 2.5 m x3.5 m. platform height : 2.1 m. chute f r p the topcoat is done using the best quality brand or duly powder coated. spiral slide shall be chute made of frp (fiber reinforced plastic / lldpe (low linear density poly ethyline) having thickness of 4mm slide center support shall be 80mm nb b lass gi pipe. landing module shall be supported by 20mm nb b class gi pipe. slide extension platform shall be made from frp / lldpe. the railing shall be made from 15mm nb and 20nn nb b class gi pipe. all pipes shall be coated with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat shall be powder coated to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)c37c40c41c39 (as per direction of officer

corporations/Associations/Others

CTN :41204378

04 Aug, 2025 NA

Kolkata - West Bengal

Tender For centralized rate contract for two (02) years of spares of sam turbo make pumps installed in ash handling plant of dvc - impeller with screw & hub cap : part no : -18 & 38, 58 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), fasteners set (total quantity of fasteners applicable for one bare ba overflow transfer pump, model : arl 200/410 ) : part no : -na : material: - ms / hts, lock washer (p.end) : part no : -63 : material: - is 1363 ms, piston ring : part no : -51 : material: - is 210 fg 200, key (coupling) : part no : -32 : material: - bs 970 en 8, laybrinth (drive end) : part no : -24 c : material: - astm a 216 gr wcb, coupling set [od 280 mm] : part no : -na : material: - is 210 fg 200, base with top cover : part no : -1 & 2 : material: - is 210 fg 200, volute casing : part no : -17 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), lock nut (p.end) : part no : -60 : material: - is 2062 c 15, grease nipple : part no : -48 : material: - steel, lock washer : part no : -47 a : material: - is 1363 ms, check nut : part no : -47 : material: - astm a 216 gr.wcb, key (shaft sleeve / impeller) : part no : -31 : material: - aisi 304, bracket side cover : part no : -25 : material: - astm a 216 gr wcb, laybrinth (pump end) : part no : -24 : material: - astm a 743 cf8, shaft sleeve : part no : -12 : material: - aisi 410 (h), gland : part no : -10 : material: - astm a 216 gr.wcb, grease retainer : part no : -7 : material: - is 210 fg 200, wear plate (b.side) : part no : -16 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), pump shaft with keys : part no : -4 : material: - bs 970 en 8, lantern ring : part no : -13 : material: - aisi 410, gland housing : part no : -9 : material: - alloy ci (290 - 320 bhn), end cover : part no : -5 : material: - is 210 fg 200, ba overflow transfer pump complete without motor, model-arl 200/410, earlier pump sl.no.-16804-16805, head:20mwc, capacity: 320 cubic meter/hr., size:200x200., o ring set (1 set=8nos.), for ba overflow transfer pp, model of pump-arl 200/410, shaft sleeve : part no : 53.6 : material : aisi 410, impeller with nut & helicoil insert : part no : 24.2 : material : is 318 gr.i, bearing housing lantern : part no : 35.6 : material : is 210 fg 200, bearing bed : part no : 36.7 : material : is 210 fg 200, bearing cap(outer) : part no : 37.2 : material : is 210 fg 200, bearing cap(inner) : part no : 37.3 : material : is 210 fg 200, oil seal set (1set = 2 nos) : part no : 43.13 & 43.3 : material : syn. rubber, impeller nut with helicoil insert : part no : 93.4 & 94.21 : material : aisi-316, wear ring (casing) : part no : 51.4 : material : is 318 gr.ii, wear ring (casing cover) : part no : 51.23 : material : is 318 gr.ii, key(coupling) : part no : 95.2 : material : bs 970 en8, circlip : part no : 94.23 : material : spring steel, grooved nut & lock washer : part no : 93.3 & 94.03 : material : sae 1018/1020 is 513 crca sheet, gland : part no : 46.4 : material : is 210 fg 260, pressure ring : part no : 46.9 : material : aisi 410, lantern ring : part no : 46.10 : material : aisi 410, gland packing set (1set = 4 nos) : part no : 47.3 : material : tiga, fastners set [total quantity of fastners applicable for one bare ash conditioner water pump, model : cpc 80/400 ] : part no : na : material : ss, key(impeller) : part no : 95.03 : material : aisi-316, key (sleeve) : part no : na : material : aisi-316, gasket set (1set = 4 nos) : part no : na : material : caf-9/ paper oil resist, volute casing : part no : 11.4 : material : is 210 fg 260, pump shaft with keys : part no : 22.3 : material : bs 970 en8, disc (impeller) : part no:550 : material :-ansi-316, gland : part no:452 : material :-astm a 743 gr.wcb, lantern ring : part no:458 : material :-aisi 410, key (impeller / shaft) : part no:940.01 : material :-aisi 316, lock washer : part no:931 : material :-sae 1018/1020, bearing cover (n.d.e) : part no:360.01 : material :-ast

Ball Bering Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Corporations And Associations And Others

corporations/Associations/Others