Latest ball mill scrap Tenders | Government ball mill scrap Tenders

State Government

CTN :45397974

24 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l

CTN :45609510

03 Jul, 2026 NA

Shahjahanpur - Uttar Pradesh

Tender For supply of arcing and tear drop welding in our mill roller teeth roller

CTN :45407496

20 Jun, 2026 1.42 Lacs

Sitapur - Uttar Pradesh

Tender For corrigendum : supply of of c. s. bearing housing for feed and discharge roller (on conversion basis) , mill size 30" x60"

CTN :45593205

03 Jul, 2026 NA

Ghatampur - Uttar Pradesh

Tender For mill top trpf roller with forged steel shaft 40c8 left mill drive length 3044mm jornal cbyc of beari

CTN :45578995

01 Jul, 2026 NA

Ghatampur - Uttar Pradesh

Tender For gm side roller bearing for bottom mill roller approx wt 75 kg , gm side roller bearing for bottom mill roller approx wt 70 kg

CTN :45596756

03 Jul, 2026 1.00 Lacs

Sultanpur - Uttar Pradesh

Tender For tender for mill transmission gear ke gearon ko uthaker mill crane or hydra se transmission gear ki peetal ki 300mm id ki bearing top or bottom dismantle kar truck se load kar is mill me lane ka karya , mill transmission gear ke gearon ko uthaker mill crane or hydra se transmission gear ki peetal ki 250mm id ki bearing top or bottom dismantle kar truck se load kar is mill laker unload karne ka karya , rasda mill se tail bar coupling ko dismantle kar truck me load kar is mill ne laker unload karne ka karya , 250 hp ki cutter motor ko dismantle kar truck me load kar is mill me laker unload karne ka karya , mill no 1 ko dismantle kar top roller or discharge roller ko truck me load kar is mill me laker unload karne ka karya , mill no 4 ko dismantle kar top roller or discharge roller ko truck me load kar is mill me laker unload karne ka karya

corporations/Associations/Others

CTN :45587254

02 Jul, 2026 2.70 Lacs

Meerut - Uttar Pradesh

Tender For supply of gun metal bearing 1 , gun metal bottom side bearing1 , g m mill bottom side roller bearing , g m casting on conversion basis hollow bares , gm casting on conversion basis nut drum bush

CTN :45592329

10 Jul, 2026 NA

Tiruvannamalai - Tamil Nadu

Tender For mill top roller half new bearing

CTN :45308418

22 Jun, 2026 2.12 Crore

Baran - Rajasthan

Tender For corrigendum : annual contract for routine, breakdown & annual maintenance work of roller coal mill (type mvm-32r), coal burner panel, gravimetric coal feeder, coal pipe, mrhs & other associated works of 2x660 mw of u 5&6 at csctpp, chhabraa

CTN :45537220

27 Jun, 2026 4.07 Lacs

Bareilly - Uttar Pradesh

Tender For supply of 1ci item , 2cs trash plate , 3ci scraper , 4gun metal item , 5gm bearing for mill trpf roller , 6gm bearing for mill side roller feed and discharge , 7gm bearing for mill top roller

Ball Mill Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others