Latest ball mill Tenders | Government ball mill Tenders

State Government

CTN :40534123

09 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For corrigendum : supply of c.i./c.s. casted item - c.i. casted items on new basis, c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) ma

Central Government And Public Sector

CTN :40229257

06 Jun, 2025 NA

Damanjodi - Odisha

Tender For bid to ras supply of ball mill liners and spares - spout feeder assy.old ball mill_1000070477_1_12506019590 , feed spout for ball mill-1001_1002_1000070477__12506010000 , trunion liner discharge end_1000070477__12506000370 , trunion liner feed end_1000070477__12506000200 , feed and disch head liner , pos- y_1000070477__12506011150

Central Government/Public Sector

CTN :40173299

10 Jun, 2025 14.70 Lacs

West Tripura - Tripura

Tender For corrigendum : supply of ball mill for laboratory (q3)

Central Government/Public Sector

CTN :40568541

23 Jun, 2025 NA

Haridwar - Uttarakhand

Tender For supply of aaa207003009 drg: - rev: 00 counter bore tool dia 22 with pilot 15.5 mm drg. no. -r2070-0300 , aaa222303905 end mill dia 50 with r4 cl= 105, wl= 140 drg. no. r2223-0390 rev. -01 n. std: spt-hss-mp

CTN :40573724

10 Jun, 2025 NA

Villupuram - Tamil Nadu

Tender For drill machine drill bit straight shank drill bit and end mill cutter

CTN :40428282

06 Jun, 2025 NA

Allahabad - Uttar Pradesh

Tender For corrigendum : supply of m1126050305: c-f3 ultra kluber fluid grease for ball mill fgd system at ntpc meja

CTN :40557017

20 Jun, 2025 NA

Nagpur - Maharashtra

Tender For supply of solid carbide end mill diameter 10.0mm. details as per annex ure.

State Government

CTN :40554462

30 Jun, 2025 NA

Kheda - Gujarat

Tender For supply of h.t. fasteners at wtps. - grub screw allen head size m10x25 unbreko make, high tensile hexagonal head bolt, size m.20 x 100 mm, full thread (f.t.) mtl: steel conf. to is-1367, high tensile hexagonal head bolt with 2 flat washer, size m.20 x 80 mm, full thread (f.t.) mtl: steel conf. to is-1367, class 10.9., high tensile hex head bolt size m 24x120 long mechanical properties as per class 10.9 ., high tensile csk bolt with nut and spring washer size:m16x60mm full thread,property class 12.9 as per is:1367 unbrako/tvs/gkw/pfl make, unbr hex socket grub screw type g m6x25, high grade alloy steel grub screw size m8 x 20 full thread mtl alloy steel 45 h conf to is 6094, grub screw allen head size m12x25 unbreko make, ht allen bolt m 6x40mm gr.12.9, ht allen bolt m 6x 50, unbrako make hexagonal bolt, nut & spring washer size m16 x 60 full threaded of grade 10.9, high tensile hex bolt, size 3/4" x 2", full thread (f.t.), high tensile hex bolt & nut, size 3/4" x 2 1/2", half thread (h.t.), high tensile hex bolt & nut, size 3/4" x 3", half thread (h.t.), high tensile hex bolt & nut, size 3/4" x 3 1/2", half thread (h.t.), socket head cap screw (allen head bolt), size : 3/8" dia x 1" long bsw full thread of high grade alloy steel material properties:as per bs-2470, alenkey full thread bolt : 1/2"x1.1/2", socket head cap screw (allen head bolt) ,size : 1/2" dia x 1" long bsw full thread of high grade alloy steel material properties:as per bs-2470, m8x40 mm brass hex bolt, csk bolt- nut m8 x 50mm of coal mill xrp-783, unbreko make allen key bolt size: m08 x 50 mm, csk head cap screw size: m 10x30, unbreko make allen bolt size: m10 x 35 mm, high tensile hexagonal head bolt, size m.10 x 40 mm, full thread (f.t.) mtl: steel conf. to is-1367, bolt unbreko make (hex head) 10x50, allen key bolt m 10x50, boiler drum sepretor j bolt 12mm thick 2 no nut & 1 no washer, high tensile hexagonal head bolt, size m.12 x 60 mm, full thread (f.t.) mtl: steel conf. to is-1367, unbrako socket head cap screw size m.12 x 110 ht, hex head bolt of size m14x50 conf.to is 1364,din 933 property class 10.9 as per is 1367, ht hexagonal full threaded bolt with nut size-m14x60mm, unbrako high tensile hex.bolt & nut, size m.14 x 75 mm , full thread (f.t.), high tensile hexagonal head bolt, nut & washer of size m 16x100 full threaded of gread 10.9, unbrako hex.bolt size m.20 x 65 mm, stud with two nut size m.22 x 130 mm, full threaded., hex socket head cap screw, iso 4762, m24x50, gr 12.9, unbreako socket head cap screw size m. 24 x 90 mm screw, ht hex bolt nut m 24x120,gr.8.8, ht stud size: m24 x 210 mm with nut (90mm thread at one end & 40mm at other end), high tensile hexagonal head bolt of size m30 x 60, unbrako make hexagonal head bolt and nut with washer: m 30 x 170, high tensile hexagonal unbraco bolt of size m 32x160 with nut., unbreako socket head cap screw size m. 33 x 75 mm screw, high tensile hex bolt size m33x75 mm ft., hex head bolt, is 1364, m33x90, gr 10.9, ht hex bolt and nut with one spring washer m36x180mm gr. 12.9, high tensile hexagonal head bolt, size m.16 x 50 mm, full thread (f.t.) mtl: steel conf. to is-1367, ht hex. bolt and nut with two spring washers m12x40 gr. 12.9, unbreko make ht hex. bolt of m20x60mm with nuts and washer as per is 1364 din 933 and threads as per metric is-4218 bolt 10.9 grade, nut and washer 10.9 grade and having std pitch and thread length i.e. full thread., high tensile, hexagonal head bolt, nut & two plain washers, size- m8 x 40mm.

Central Government/Public Sector

CTN :40435697

05 Jun, 2025 NA

Bilaspur - Chhattisgarh

Tender For corrigendum : service contract for re-babbiting of fgd ball mill journal bearing atntpc solapur.

Central Government/Public Sector

CTN :40344639

07 Jun, 2025 NA

Singrauli - Madhya Pradesh

Tender For corrigendum : tender for supply of turning oblique facing tool , turning oblique facing tool , turning oblique facing tool , carb tip , 12x12mm , turning oblique facing tool , turning oblique facing tool , stragt turning tool , boring oblique facing tool , boring oblique facing tool , boring oblique facing bar , 16x16x210mm , threading tool , external , 16x16x110mm , threading tool , external , 25x25x140mm , threading tool , internal , 16x16x140mm , threading tool , internal , 25x25x180mm , threading tool , internal , 32x32x100mm , turning oblique groovng tool , v-profile , turning oblique groovng tool , v-profile , end mill cutter , parallel shank , hss , 3mm , end mill cutter , parallel shank , hss , 4mm , end mill cutter , parallel shank , hss , 5mm , end mill cutter , parallel shank , hss , 6mm , end mill cutter , parallel shank , hss , 8mm , end mill cutter , parallel shank , hss , 10mm , end mill cutter , parallel shank , hss , 12mm , end mill cutter , parallel shank , hss , 13mm , end mill cutter , parallel shank , hss , 15mm , end mill cutter , parallel shank , hss , 16mm , end mill cutter , parallel shank , hss , 18mm , end mill cutter , parallel shank , hss , 20mm , end mill cutter , parallel shank , hss , 24mm , end mill cutter , parallel shank , hss , 25mm , parting off tool , iso 7r 2012 p 40 , parting off tool , ct , iso7r2516p30 , int th tool , r-166 11 p30 , 12x12 , is13743 , cranked finish tool , crank turning tool , crank turning tool , turning oblique facing tool , tungsten carbide , boring oblique facing tool , tungsten carbide , boring oblique facing tool , 25x25x300mm , str turning tool , ct , iso1 l 2020 p30 , boring&facing bar , iso9r0808p30 , int th tool , r 166 12 p30 , tip tool , tung carbide brazed , turning oblique facing tool , turning oblique facing tool , tip tool , tungsten carbide , turning oblique facing tool , 3r 4025 , turning oblique facing tool , crank finish tool , tc , 32x20x170mm , parting tool , tungsten carbide , parting tool , 16x10x110mm , carbide tip tool , iso 9r1616p30 , boring oblique facing tool , tungsten carbide , boring oblique facing tool , 12x12x180mm , turning tool , cranked round nose , threading tool , external , 12x12x90mm , threading tool , internal , 10x10mm , turning oblique groovng tool , v-profile , turning oblique groovng tool , v-profile , int recessing tool , cranked , int recessing tool , cranked

Ball Mill Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector