Latest bare pump Tenders | Government bare pump Tenders

CTN :45592297

24 Jun, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan points (06) in

CTN :45576815

01 Jul, 2026 NA

Meerut - Uttar Pradesh

Tender For 200 x 200 mm self priming mud pump set driven by 80 hp diesel engine , 200 x 200 non-clog mud pumpset driven by 55 hp diesel engine , 150 x 150 mm self priming pumpset driven by 32 hp diesel engine

CTN :45572401

09 Jul, 2026 NA

Tiruvannamalai - Tamil Nadu

Tender For old set evaporate condensate pump rc no 7019/ps/bac/2026 - old set evaporate condensate pump, old set evaporator condensate pump model : cd 80-50-320 size : 80 x 50 mm discharge : 50 m /hr head : 20 m hp : 10 rpm : 1440 moc : casing cast iron,impeller :ss 304 shaft : ss410 sleeve : ss410 h & g bare pump , syrup pump model : cd 100-65-320 size : 100 x 65 mm discharge : 50 m /hr; head :30mtr hp : 20 rpm : 1440 moc : casing ss 304,impeller :ss 304 (closed type) shaft : ss410 sleeve : ss410 h & g , mud pump model : 80 bc-320 size : 100 x 80 mm discharge : 30 m /hr head : 20 m hp/rpm : 25/1440 moc : body ss 304,impeller :ss 304 (closed type) shaft : ss410 sleeve : ss410 h & g , lime pump type : horizontal end section(semi open impeller) model : cd 65-40-320 size : 65 x 40 mm motor recommended :3.7 kw/1450 rpm liquid handled : milk of lime shaft sealing : gland packed mol temperature : 70 degree centigrade mol density :1.162 kg/m3 discharge : 4.5 m /hr head : 25 m hp/rpm : 25/1440 moc : casing ss 304,impeller :ss 304 shaft c45 sleeve : ss410 h & g

CTN :45386609

20 Jun, 2026 NA

Thanjavur - Tamil Nadu

Tender For corrigendum : purchase of gita make bare pump

CTN :45569929

20 Jun, 2026 NA

Dahej - Gujarat

Tender For design, engineering, supply, installation, testing and commissioning of "non clog end suction type horizontal centrifugal pump set for effluent" with accessories and allied electro-mechanical and instrumentation and scada work at dahej pcpir pumping station at dahej - ii. (suva village).

Central Government/Public Sector

CTN :45354608

02 Jul, 2026 4.36 Crore

Angul - Odisha

Tender For corrigendum : supply of horizontal centrifugal pump sets 38 lps x 160 mtrs head with flp 550 volts electricals & accessories , vertical turbine pump set, 350 lps x 65 mtr head with 6.6 kv electricals & accessories , vertical turbine pump set, discharge: 270 lps, head: 62 mtrs, electricals: 6.6 kv electricals & acc , horizontal centrifugal pump sets 180 lps x 170 mtr head with 3.3kv electricals & accessories , horizontal centrifugal pump sets, 100 lps and 180 mtrs head with 3.3kv electricals and accessories , horizontal centrifugal pump set 75 lps x 80 mtrs. head with 415 volts electrical & accessories , horizontal centrifugal bare pump 160 lps x180 mtrs head & accessories without prime movers & starter , horizontal centrifugal pump set, 180lps x 200mtr head, 6.6kv electricals and accessories

Central Government And Public Sector

CTN :45346149

24 Jun, 2026 NA

East Champaran - Bihar

Tender For corrigendum : supply of kirloskar make pumps spares on door delivery basis at hbl plant sugauli, east champaran, bihar - supply of kirloskar make pumps spares at hbl plant sugauli as per the technical specification mentioned below:, bare pump model db 100/40 or ib 100/40xe,ci impeller, wearing plate de sp-4l make kirloskar, screw counter sunk m12 1.75 50 mm lft ss make kirloskar, nut hex head (ms) sp-4l m12 1.75, sewage dewatering submersible pumpmodel eterna 15000cw 4plpower rating 15 kw / 20 hpdelivery size 150 mmrated voltage 380 vspeed 1440 rpmmax solid handling size 45 mmhead range 6 m to 20 mflow 288 m /hr to 400 m /hrimpeller cidelivery casing cimotor body cipump shaft cspump make kirloskarsuitable cable for eterna 15000cw 4pl pump 30 m with star delta panel., self-priming pump coupled with ie2 motor, starter, and cablemodel sp4l + with 12.5c4 motor power rating 9.3 kw / 12.5 hpsuction 100 mmdelivery 100 mmrated voltage 415 vspeed 1450 rpmimpeller dia 292 mmhead range 10 m to 26 mflow range 41 lps to 16 lpsmaterial of construction (moc):impeller cidelivery casing cimotor body cishaft c40sealing gland packingpump make kirloskarstar delta panel for sp4l pumpsuitable cable for sp4l pump 30 m.

Corporations And Associations And Others

CTN :45532088

22 Jun, 2026 55.03 Lacs

Delhi - Delhi

Tender For procurement of 6 bhp and 12 bhp diesel engine pump sets with various accessories for electrical and mechanical department under rohini zone - supply of horizontal type self priming non clog sewage pump, air cooled, single stage pump, with ci impellar en-8 shaft & sleeve mounted on ms four wheeled trailer/trolleywith 4 nos. solid rubber wheel etc complete as required. horse power :6 bhp or suitable capacity size, engine type :diesel engine ,material :mild steel impeller ,body ,shaft &sleeve : cast iron, size: 80x80, head 12 m @,discharge :1080 lpm speed :1500 rpm, trolly :ms 04 wheel with solid rubber tyres, supply of horizontal type self priming non clog sewage pump, air cooled, single stage pump, with ci impellar en-8 shaft & sleeve mounted on ms four wheeled trailer/trolleywith 4 nos. solid rubber wheel etc complete as required. horse power : 12 bhp or suitable capacity engine type :diesel engine ,material :mild steel impeller ,body ,shaft &sleeve : cast iron, size :100x100 mm, head 12 m @ ,discharge 1500 lpm speed 1500 rpm trollet :ms 04 wheel with solid rubber tyres, supply of pvc green suction hoses (heavy duty) w/p 7kgf/cm sq. in size of 75 mm, supply of pvc green suction hoses (heavy duty) w/p 7kgf/cm sq. in size of 100 mm, supply of agricultural cotton hose (heavy duty) in size of 75 mm, supply of agricultural cotton hose (heavy duty) in size of 100 mm, supply of ci foot valve (screw type of size 80 mm pn0.2 ), supply of ci foot valve (screw type of size 100 mm pn0.2 ), supply of ci foot valve (screw type of size 150 mm pn0.2 ), supply of ci nipple for 80 mm foot valve, supply of ci nipple for 100 mm foot valve, supply of ci nipple for 150 mm foot valve, supply of pvc green suction hoses (heavy duty) w/p 7kgf/cm sq. in size of 150 mm, supply of agricultural cotton hose (heavy duty) in size of 150 mm

CTN :45553953

17 Jun, 2026 4.25 Lacs

Pali - Rajasthan

Tender For non clog submersible pump

CTN :45537127

25 Jun, 2026 NA

Guna - Madhya Pradesh

Tender For supply of shaft bushing bearing part no 4l602 drawing no 1sv 22sv resv9 model 1sv10na30n make xylem goulds , sleeve o ring part no 5k510 moc viton drawing no 1sv 22sv resv9 model 1sv10na30n make xylem goulds , seal gland o ring part no 5k516 moc viton drawing no 1sv 22svresv9 model 1sv10na30n make xylem goulds , final diffuser part no 3l71 drawing no 1sv 22sv resv9 model 1sv10na30n make xylem goulds , diffuser with bushing bearing part no 3l63 drawing no 1sv 22sv resv9 model 1sv10na30n make xylem goulds , impeller part no 2l917 drawing no 1sv 22sv resv9 model 1sv10na30n make xylem goulds , bushing spacer part no 4k1028 drawing no 1sv 22sv resv9 model 1sv10na30n make xylem goulds , pump initial stage part no 3l79 drawing no 1sv 22sv resv9 model 1sv10na30n make xylem goulds , pump initial stage washer part no 13l105 drawing no 1sv 22sv resv9 model 1sv10na30n make xylem goulds , complete o ring kit part no 5k517 moc viton drawing no 1sv 22svresv9 model 1sv10na30n make xylem goulds , shaft part no 4k1053 drawing no 1sv 22sv resv9 model 1sv10na30n make xylem goulds , mechanical seal part no 10k168 moc carbon silcar viton drawing no 1sv 22sv resv9 model 1sv10na30n make xylem goulds , liquid end assembly bare pump part no 1sv10na30n drawing no 1sv 22sv resv9 model 1sv10na30n make xylem goulds , impeller spacer part no 4l593 drawing no 1sv 22sv resv9 model 1sv10na30n make xylem goulds * /bid number : gem/2026/b/7648106 + /dated: 12-06-2026 ' ' / bid document 1 / 13

Bare Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Corporations And Associations And Others