Latest base plate Tenders | Government base plate Tenders

Central Government/Public Sector

CTN :40255495

06 Jun, 2025 NA

Bhusawal - Maharashtra

Tender For supply of base plate for smgr to m/s.bt pt.no.a-1101or m/s.aal pt.no.m 1101 as per rdso drg. no. skel-4658. (item to be procured from rdso approved source only.) [ warranty period: 30 months afte r the date of delivery ]

Central Government/Public Sector

CTN :40254584

14 May, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply of foot plate pin of gangway bridge mounting (fall plate) of lhb coach. as per nbqs/nfr sketc h no.-2023/01/0797 (m), material spec. as per drawing. aisi-304. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40236737

22 May, 2025 1.61 Crore

Ajmer - Rajasthan

Tender For package no rj-01-03/north/2023-24 - name of road :construction of cc road in ward no. 14 diggi to pannigram chowk, dismantling upto 1.5m in foundation and/or 1.5m above ground level including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material, and stacking serviceable material within a lead of 1000m. [morth specification clause 202] concrete cement concerte plain 1:2:4 mix and precast cement concerte blocks., carrige of earth, sand, gravel, u/s kankar, lime, flyash, morrum, manure or sludge. including loading unloading 5 km lead, providing and laying mechanically mixed and vibrated cement concrete in foundation upto a depth of 1.5 metres below ground level and 1.50 metres above ground/bed level as per morth specification : clause 1000 & 1700 p.c.c. 1:3:6 mix with crushed stone aggregate 20 mm nominal size., construction of un-reinforced, dowel jointed, plain cement concrete pavement m-30, over a prepared sub- base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrance, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing complete as permorth specification clause 602., p& f mukhya mantri sadak yojana logo for roads funded by state road fund having m.s. definition plate of 1.6mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast including paint logo as per approved design and colours. the logo shall be made out of 1.6mm thick circular plate fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. the size of definition plate shall be 1500x600mm and embedding the posts by m-15 mix c.c. block 300x300x600 mm including lettering / writing and painting etc. complete in all respect, construction of pedestal of size 5.50 x 5.50 x 1.25 in stone masonary in cm 1:6 as per design and drawing complete with 25 mm thick plaster in cm 1:4 plaster and weather coat paint, supply & fixing of one side polished black granite stone 20 mm thick of size 3 x 2 with engraved and gold colour painted letter ( upto 200 letter) & border as per direction of engineer in charge on existing pedestals including transportation, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes (is 15778 : 2007 code) having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings, this included jointing of pipes & fittings with one step cpvc solvent cement , trenching refilling & testing of joints complete as per direction of engineer in charge.(external work).15 mm nominal size, name of road :construction of cc road in ward no 69 pirmithatas gajmal gali, dismantling upto 1.5m in foundation and/or 1.5m above ground level including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material, and stacking serviceable material within a lead of 1000m. [morth specification clause 202] concrete cement concerte plain 1:2:4 mix and precast cement concerte blocks., carrige of earth, sand, gravel, u/s kankar, lime, flyash, morrum, manure or sludge. including loading unloading 5 km lead, providing and laying mechanically mixed and vibrated cement concrete in foundation upto a depth of 1.5 metres below ground level and 1.50 metres above ground/bed level as per morth specification : clause 1000 & 1700 p.c.c. 1:3:6 mix with crushed stone aggregate 20 mm nominal size., construction of un-reinforced, dowel

Central Government/Public Sector

CTN :40255176

21 May, 2025 NA

Coimbatore - Tamil Nadu

Tender For supply of ms cabinet with required fasteners and nylon bush in assembled condition for cr test kit in s et, as per drawing numbers.: 1.cabinet assembly to drg.no. cwm 00919, 2.cabinet to drg.no. cwm 03616 alt-2, 3.front panel to drg.no.cwm 03716 alt-3, 4.back plate to drg.no. cwm 03816 alt-1, 5.name plate to drg.no. cwm 03916, 6.base plate to drg.no. cwm 00519 alt-1 7.all fasteners as per cwm sk 006/08 alt-3( or latest drawings). technical specification and quality acceptance checklist for as per enclosed annexures . [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40254955

10 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For supply of set of items for side bearer assembly, as per drawing no. sk.vl.144, each set consist of item no. 2 to 12 in one set (except ref. no. 01) : (1) base plate for side bearer, drawing ref. no. 02-qty: 08 num bers, (2) locking plate, drawing ref. no. 03- qty: 16 numbers, (3) shim, drawing ref. no. 04- qty: 04 numb ers, (4) fastening plate, drawing ref. no. 05- qty: 08 numbers, (5) spring washer b20, drawing ref. no. 06- qty: 64 numbers, (6) screw hex head m20 x 30 long, drawing ref. no. 07- qty: 16 numbers, (7) hex head bolt m20 x 45 long, drawing ref. no. 08- qty: 32 numbers, (8) hex head nut m20, drawing ref. no. 09- qty: 32 numbers, (9) screw hex head m20 x 40 long, drawing ref. no. 10- qty: 32 numbers, (10) locking spigot , drawing ref. no. 11- qty: 08 numbers, (11) screw hex head m20 x 25 long, drawing ref. no. 12- qty: 16 numbers. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40255156

22 May, 2025 NA

Multi City - Multi State

Tender For supply of ohe emergency mast with modified base plate as pr trd/hq/sr drawing pcee/sk/200 and the telescopic 3 nos mast as per rdso drawing eti/c/0072 along with fitting and accessories. [ warranty period: 30 months after the d ate of delivery ]

corporations/Associations/Others

CTN :38195252

12 May, 2025 4.68 Crore

Bengaluru - Karnataka

Tender For corrigendum : procurement of nrc engine spares - input pipe for turbo charger ll bsiii, ll bsiv, sa of dipstick guide ll bsiii, ll bsiv, starter ring ll bsiii, ll bsiv, engine oil cap hino ll bsiii, spacer washer ll bsiii, ll bsiv, "s" cam distance piece ll bsiii, flange coupling ll bsiii, oil cooler plate hino ll bsiii, sa of vehicle speed sensor ll bsiii, stopper plate ll bsiii, ll bsiv, ignition relay ll bsiii , oil cooler four plate hino ll bsiii, bsiv, acclerator cable ll bsiii, vaccum indicator ll bsiii, ll bsiv, fuel head assembly ll bsiii, oil cooler 'o' ring ll bsiii, ll bsiv, valve cap ll bsiii, ll midi bsiii, oil drain pipe ll bsiii, ll bsiv, thermostat ll bsiii, engine speed sensor ll bsiii, water temp sensor ll bsiii, ll bsiv, boost procure temp sensor ll bsiii, isolator noise tt bsiii, tt bsiv, tube dip stick tt bsiii, tube dip stick tt bsiii, tt bsiv, dipstick tt bsiii, tt bsiv, dip stick tt bsiii, tt bsiv, plug expansion tt bsiii, tt bsiv, plug expansion tt bsiii, dipstick tt bsiii, tube oil guage tt bsiii, tube oil guage tt bsiii, flywheel tt bsiii, flywheel tt bsiii, clamp v band tt bsiii, tt bsiv, clamp v band tt bsiii, tt bsiv, thermostat tc tt bsii, pin timing tt bsiii, plug expansion tt bsiii, plug expansion tt bsiii, racker lever assembly tt bsiii, tt bsiv, connecting rod bolt tt bsiii, thermostat 1616 tt bsiv, accl pedal sensor ll midi bsiv, urea tank cap ll midi bsiv, oil cooler plate ll bsiv, connecting-rod bsiv, damper pully tt bsiv, cam shaft tt bsiii, injectior washer hino ll bsiii, ll bsiv, flywheel face plate ll bsiii, ll bsiv, gear fip drive 60 teeth ll bsiii, fan blade assy bsii (4 hole/10 leaf) ll bsiii, ll bsiv, fly wheel bolt hino ll bsiii, themostat mtl ll bsiii, ll bsiv, engine mounting bracket rh ll bsiii, ll bsiv, disel main hose (tank to hand primer) ll bsiv, dip stick guage ll bsiii, ll bsiv, crdi pressure relief valve ll bsiv, cap assembly fuel tank tt bsvi, thermostat eic bsiii , fly wheel gear ring tt bsiii, assembly fly wheel with ring gear tt bsiii, fly wheel asembly eic bsiii, assembly fly wheel and ring gear 694 auto eic bsiv, ring gear fly wheel e694 auto eic bsiv, viscous fan controlling unit eic bsiv, thermostat eic bsiii, engine oil cap eic bsiii, eic bsiv, fly wheel ring eic bsiii, shim speed sensor eiv bsiv, thermostat eic bsiii, eic bsiv, assy idler pulley eic bsiv, viscus fan assembly eic bsiv, oil cooler inner eic bsiii, engine oil cap tt bsiii, cool breather ll bsiii, ll bsiv, clip engine breather eic bsiii, eic bsiv, cooler plate assbly eic bsiv, speed sensor mtg ll bsiii, tharmostat ll bsiii, ll bsiv, ll bsvi, pipe by pass eic bsiii, idler bracket eic bsiv, spacer bearing front eic bsiii, eic bsiv, damper pully ll bsiii, sa of guage dip stick slf ll bsiii, fuel tank cap ll bsiv, thermostat tt midi bsiii, rocker pedestal eic bsiv, flywheel ring (138 teeth) tt bsiii, tata engine oil cap tt bsiii, tt bsiv, thermostat tt bsiii, tt bsiv, thermosta assembly tt bsiv, plug expansion tt bsiii, coller egr unit cooler exhaust gasreci ll bsiv , assy oil cooler eic bsiv, exhaust manifold 6 hole ll bsiv, egr valve and actuator assembly ll bsiv, body oil coller eic bsiii, pendant type elec acc pedal flr mtd ll bsiv, egr pipe in second line ll bsiv, hose engine breather eic bsiv, dip stick assy eic bsiii, assy breather hose eic bsiv, gauge oil level eic bsiv, overhaul kit turbo charger ll bsiii, honey well minor repair kit ll bsiii, proximity sensor ll bsiii bsiv, brake liningade fuse 10amp ll bsiii , minor repair kit eic bsiii, oil cooler element eic bsiv, pressure sensor-common rail ll bsiv tt bsiv, turbo repair kit tt bsiv, fuse 5 amps ll bsiii , fan belt tensioner eic bsiv, speed sensor tt bsiv ll bsiv, oil pressure sensor ll bsiv, engine speed sensor ll bsiv, turbo charger repair kit ll bsiv, oil pressure sensor eic bsiv, dipstick tt bsiii bsiv, fuse 30 amps ll bsiii , secondary repair kit tt bsiii, rocker switch battery cut off 24v eic bsiv, fuse blade type ll bsiii bsiv, fuel

Central Government / Public Sector

CTN :40248364

16 May, 2025 NA

Secunderabad - Telangana

Tender For supply of set of door latch assembly for sb & hb doors of three phase locomotives as per ref.no.1 to 7 of els/lgd drg.no.c/els/lgd/ b.f/3/42. one set consisting of (1) base plate as per is:6603.ref.no.1.-01 no./set. (2)lock plate as per is:6603.ref.no.2.-01 no./set. (3) supp ort plate as per is:6603.ref.no.3.-01 no./set. (4) fixing screw as per is:1364/1367.ref.no.4.-04 nos./set. (5) flat washer as per is:2016.ref. no.5.-04 nos./set. (6) spring washer as per is:3063.ref.no.6.-04 nos./set. (7) hex. nut as per is:1364/1367.ref.no.7.-04 nos./set [ warrant y period: 30 months after the date of delivery ]

CTN :40241348

27 May, 2025 NA

Baramulla - Jammu And Kashmir

Tender For supply of clutch plate assy , pressure plate , brg clutch release , joint assy universal , road spring assy front , road spring assy rear , brake pad assy , brake shoe set , fuel pump motor , suspension bush kit , engine mounting pad , coil assy ignition , rotary switch , timing belt

CTN :40255216

15 May, 2025 NA

Gorakhpur - Haryana

Tender For supply of memu item- aux. compressor- poh kit for aux. c compressor crc- 150 of elgi make, consist ing of 09 items. (1) packing crank case to motor mounting pt-no. 000411630 qty- 01 no. (2) packing crank case to cylinder part no. 00041164c qty. 01 no. (3) packing cylinder to valve plate part no. 00041152c qty. 01 no. (4) packing cylinder head to valve plate part no. 00041153c qty.-01 no. (5) ring set 60 d, part no.- 0 22401039 qty.- 01 set consisting of (a) plain ring compressor part no. e1687, qty.- 01 no. (b) stepped ring compressor part no.- e2033 qty.- 01 no. (c) slotted oil control ring part no. e1688 qty.- 02 nos. (6) valve pa rt no. 000330950 qty.- 02 nos. (7) gudgeom pin pt. no.00514180 qty.- 01 no. (8) interval circlip b- 18 part no. 000917218 qty. 02 nos. (9) copper asbestus washer part no. 000521950 qty. 02 nos. [ warranty peri od: 30 months after the date of delivery ]

Base Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors