Latest bathroom fitting Tenders | Government bathroom fitting Tenders

Central Government/Public Sector

CTN :45730255

22 Jul, 2026 NA

Ajmer - Rajasthan

Tender For supply of m.s. butt hinge cold rolled medium weight 100x58x1.9 mm dully stamped with n.w.rly. initial, table-2 to is:1341/2018 rev-6, amndt. no.2 ]

Central Government/Public Sector

CTN :45736475

30 Jul, 2026 NA

Ajmer - Rajasthan

Tender For supply of m.s. butt hinge cold rolled medium weight size-75x47x1.7 mm ,dully stamped with n.w.rly initial, table-2 to is:1341/2018 rev-6 amndt.2. ]

State Government

CTN :45684603

06 Jul, 2026 NA

Haringhata - West Bengal

Tender For rate quoted for mgnrega work various material under haringhata block - rate quoted for mgnrega work various material under haringhata block, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket

Central Government/Public Sector

CTN :45703049

03 Jul, 2026 4.15 Lacs

Kollam - Kerala

Tender For procurement of spares for bag stitching machines - pressure foot guide am (18341/28), throat plate screw (23473/28), thread tension screw (7023/f), thread tension nut (85), tension disc (54), tension spring (95), feed dog arm pin (7020/e), feed dog arm pin nut (2710/as), drive pin (2710/c), needle bell crank taper pin screw (2701/m), needle drive arm bearing cap (2714/r), needle drive arm end screw (2714/q), sewing head fixing nut (5254/18), looper screw (6789/18), looper nut (6790/18), grub screw eccentric (2700/b), grub screw special (2700/ba), pressure foot roll screw (18339/18), needle tension spring (2710/b), screw special (16791/18), needle drive sleeve (2714/e), 1/4 dia brt ms washer, 5/16 dia plain washer, screw special (76), oscillator bar (7340/b), looper oscillating block screw (3010/e), looper clamp assly (20792/38), looper drive link (3010/0), looper drive link taper pin (3010/ca), nibbler knife (11025/38), needle bar thread eyelet (2714/d), needle clamp nut (2714/cj), feed dog am bell crank (7020/s), feed dog arm pin sleeve (7020/f), feed dog am pin spring (3014/c), oscillator pin (2701/s/hs), feed dog strut (2702/j), feed dog strut retainer (2703/x), assly oscillating block complete (16502/38), looper (3010/j), needle (30), needle drive link (2703/aa), needle drive link taper pin (2703/ab), grub screw standard (2710/fa), screw special (3010/db), nut special (2710/pp), nut special (3010/ab), needle bar bush (2714/b), pressure foot hinge pivot screw (2703/ja), screw special (2437/18), fibre disc retaining screw (2714/j), thread eyelet (196), feed dog arm shaft nut (2710/an)

CTN :45469219

04 Jul, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of z943 strippex (avl) (n8010-p060879) (25bqec024) , z948 strippex (ajr) ) tape (1 no= 51mmx1.27mmx2.6m) (n8010-p060884) (25bqec024) , z931 (a) (strippex aerosol spray (n8030-p060865) (25bqec024) , al filler wire 5% silican (n3439-000139) (25bqec024) , alluminium filler rod 3.15mm (n3439-000298) (25bqec024) , piping steel galvanised medium 65mm bore x 3.65mm thick (n4710-000032) (25bqec024) , piping, steel, medium, galvanised (welded or seamless) 114.3mm (n4710-000034) (25bqec024) , bolt with nut m6x20mm (n5306-000775) (25bqec024) , bolt m/c hex hd prec coarse pitch phos steel 4.6 m 12x65mm (n5306-003479) (25bqec024) , alu. alloy angle equal sided sizes (mm) 25x25x3 (n9540-000003) (25bqec024) , alliminium alloy angle 40x40x3mm (n9540-000005) (25bqec024) , flux welding silver solder (n3439-000176) (25bqec024) , ms electrodes welding dia 4mm (n3439-000226) (25bqec024) , eye plate, rectangular, id 32 mm (n4030-000829) (25bqec024) , pipe cu ni fe alloy (90/10) ed 21.49-21.41 id 19.05 th 1.22mm (n4710-000378) (25bqec024) , hinge steel 50mm (n5340-000903) (25bqec024)

Central Government/Public Sector

CTN :45578647

03 Jul, 2026 4.15 Lacs

Kollam - Kerala

Tender For corrigendum : supply of supply of needle bar guide , supply of pressure foot guide arm , supply of throat plate screw , supply of thread tension screw , supply ofthread tension nut , supply of tension disc , supply of tension spring , supply of feed dog arm pin , supply of feed dog arm pin nut , supply of drive pin , supply of needle bell crank taper pin screw , supply of needle drive arm bearing cap , supply of needle drive arm end screw , supply of sewing head fixing nut , supply of looper screw , supply of looper nut , supply of grub screw eccentric , supply of grub screw special , supply of pressure foot roll screw , supply of needle tension spring , supply of screw special , supply of needle drive sleeve , supply of one byfour dia brt ms washer , supply of five by sixteen dia plain washer , supply of oscillator bar , supply of feed dog 8 teeth , supply of throat plate , supply of pressure foot assly , supply of looper oscillating block screw , supply of looper clamp assly , supply of looper drive link , supply of looper drive link taper pin , supply of nibbler kinfe , supply of needle bar thread eyelet , supply of needle clamp nut , supply of feed dog arm bell crank , supply of feed dog arm pin sleeve , supply of feed dog arm pin spring , supply of oscillator pin , supply of feed dog strut , supply of fee dog strut retainer , supply of assly oscillating block complete , supply of looper , supply of needle , supply of needle drive link , supply of needle drive link taper pin , supply of grub screw standard , supply of nut special , supply of needle bar bush , supply of pressure foot hinge pivot screw , supply of fibre disc retaining screw , supply of thread eyelet , supply of feed dog arm shaft nut , supply of thread guide , supply of feed dog arm shaft , supply of looper drive sleeve , supply of arrgt of oscillating block , supply of pressure foot guide stud , supply ofneedle drive sleeve clamping screw //bid details 2 / 61

State Government

CTN :45676053

02 Jul, 2026 24.20 Lacs

Bengaluru - Karnataka

Tender For annual maintenance of house keeping, terrace area, common area, basement area, fire, pump, over head tanks, water supply, quarters bathroom fittings and other repairs work for the period 01-08-2026 to 31-07-2027 to multistoried residential quarters phase-1, at vasanthnagar, bangalore (reserved for sc)

CTN :45679005

04 Jul, 2026 NA

East Khasi Hills - Meghalaya

Tender For purchase of br maintenance stores bathroom fittings and fixtures - cp angle stop cock two way 15 mm , bib cock, cp 15mm bore , cp basin mixer 15 mm dia , cp towel rack-24inch , cp wall mixture 15 mm half qtr turn , cp stop cock 15 mm male , concealed stop cock half turn 15 mm , stop cock cp 15 mm , brass tap spindle 15 mm dia , health faucet 1.5m flexible tube with hook crome plated , long body bib tap cp 15 mm , cp wall mixer 3- in- 1 provision for ohs and hand shower both , bib cock, cp, two-in-one 15mm , towel rail 20 mm dia cp 750 mm long , concealed stop cock full turn 15 mm , pillar tap cp 15 mm , low level flushing cistern 10 ltr cap pvc , flush washer 0.75inch , peg hook 300mm cp six way , flush washer 0.5 inch , cp towel ring , shower rose cp symet swivell type with neck 15mm bore , hand shower with 1.5 mtr long flexible tube 15 mm bore , angle stop cock, cp 15mm , heavy ss connecting pipe for geyser 600 mm , cp stop cock 15 mm female , internal kit for flushing cistern , cp basin mixture 15 mm half qtr turn , angle cock three way cp 15mm , ewc seat cover , bib cock ptmt 15mm , soap dish cp , c p toilet paper holder , star 0.5 inch fill valve for concealed cisterns , ewc with s trap , toilet cistern adjustable water tank entry inlet fill float valve, white-green , pvc connection pipe 15 x 450mm long , tap washer with plunger 15 mm dia , urinal spreader 15mm cp , stop cock ptmt 20mm male , syphon of floor button vip , stop cock brass cp 15 mm , pvc connection pipe 15 x 600 mm long , pvc waste pipe for urinal 32 mm , whb vitreous china white 630 x 450 mm , iwc orissa pan , stop cock ptmt female 15mm bore , pvc ll flushing pipe 32 mm

Central Government/Public Sector

CTN :45675406

30 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap katchra consisting of ms sheet strip,scrap, fan jali, jali, including broken, rusty and dusty,racks, rusty dusty and pitched paint drums, broken tasla, loose pieces corroded of pipe, rusty dusty corroded and moulded sheet/nalidar sheet all sort and size, hand trolly, quarter door, gi bucket broken, wire rope rusty, dusty and broken, hand single lamp, empty boxes all type rusty, dusty and corroded nut, bolt, rivit, m.s. bracket, ms wire, ms strip, ms fencing jali, rusty & duty correded ms sariya, ms rusty welding strap,rusty & dusty ms rusty and dusty washer -ms rusty and dusty liners, rusty and dusty door hinge foot, small paint drums of 4 ltrs. capacity, dpt cane, locking plate,fire extinguishers, small pieces of ferrous sheet released from coaches, rusty & dusty corroded structure, strap, rusty & dusty pitched barrel, ms rusty & dusty corroded chair & table, tube light fitting, rusty dusty and other katchra category items with minor non- ferrous undetachable attachment. if any other material found in lot, will not be delivered. (qty on approx basis). as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

Central Government And Public Sector

CTN :45652768

29 Jun, 2026 NA

Bongaigaon - Assam

Tender For supply of hinge butt ms coled rolled heavy weight size 100mm x 75mm x 3.55,mm specn: bis specification no: steel, is:1341/92 table-1,fig-1. or latest. [ warranty period: 30 months after the date of delivery ] ]

Bathroom Fitting Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors