Latest batten Tenders | Government batten Tenders

State Government

CTN :45580671

02 Jul, 2026 NA

Ambala - Haryana

Tender For corrigendum : supply of led batten light (led tube light) (v2) (q2) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , led luminaire (recessed luminaire) (ceiling light) conforming to is 10322 (part 5/section 2) (v4) (under bis scheme - ii) (q2) , led luminaire for floodlight conforming to is 10322 (part 5/section 5) (v3) (under bis scheme - ii) (q2) , self ballasted led lamps (led bulb) (v3) conforming to is 16102 (part 2) (under bis scheme - ii) (q2)

State Government

CTN :45740135

07 Jul, 2026 44.78 Lacs

Delhi - Delhi

Tender For maintenance and electrical consumption charges of street light on pwd road under cnd division. (sh- maintenance and operation of led street lights, high mast lights, strip lights on various roads under jurisdiction of m-3513).

State Government

CTN :45380375

10 Jul, 2026 2.66 Crore

Korba - Chhattisgarh

Tender For corrigendum : supply of 6w led bulb , 14w led bulb , 20w led tubelight with integrated batten , 70w led flood light , 140 w led flood light , 190w led flood light , 240w led flood light , 35w led street light , 70w led street light , 110w led street light , 140w led street light , 190w led street light , 35w led well glass non flame proof , 35w led well glass flame proof , 70w led well glass non flame proof , 70w led well glass flame proof , 140w led high bay light , 190 w led high bay light , 36w 2x2 led panel light recess mounting , 36w 4x1 led panel light recess mounting , led post top lantern (q3)

Central Government And Public Sector

CTN :45731229

06 Jul, 2026 NA

Lumding - Assam

Tender For supply of led batten fitting 10w , 560 mm long, make- crompton, philips, surya [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45720726

15 Jul, 2026 3.50 Lacs

Satna - Madhya Pradesh

Tender For materials for the sewing industry (section 02) - paper tape , welding rod , nails (nos. 14, 17, 20) , yellow clay, chalk clay , plastic cane (for chair weaving) , chandras (shellac resin) , nc thinner , sandpaper (4-inch) , turpentine oil , paint (all colors) , water-based paint (all colors) , oil-based paint (all colors) , brush , brush , saw , triangular file , plywood (12 mm) , plywood (18 mm) , plywood (8 mm) , plywood (6 mm) , sunmica (1 mm) , sunmica (0.8 mm) , iron angle, iron strip , metal cutting blade , metal cutting blades , nuts, bolts, and washers (all sizes) , foam (3-inch, 32-density) , foam (2-inch, 32-density) , foam (1-inch, 32-density) , sofa fabric/rexine , grinding wheel , putty , brush cutter (circular blade) , gi wire , broom sticks , adhesive (sr 505) , welding goggles (black/clear) , measuring tape , drill bit , wooden block/batten , teak wood , acacia wood , sheesham wood , firewood , sealer , wood touch-up/finish , sandpaper , electric planer , c-clamp , bench vise , hand drill machine , compressor gun , compressor hose , planer machine molding die , sewing machine oil , nylon shirt buttons , hand sewing needles , sewing machine needles (10 pieces per packet) , sewing machine treadle/pedal , tailor's chalk , thread reels , amela machine bobbin case , sewing machine needle plate , scissors (size 08, 10) , sharpening stone , sewing machine , overlock machine , embroidery threads , embroidery frame , macramé cord (cotton, polyester, nylon, jute) , poly master , tree rope , stapler pins , white paper (80 gsm) , laser paper (green, 80 gsm) , white paper (68 gsm) , white paper (68 gsm) , ruled paper (68 gsm; ream of 1000 sheets) , ruled paper (68 gsm) , white paper (57 gsm) , brown paper (80 gsm) , card sheet (165 gsm) , cardboard sheet (no. 32) , rin/surf excel laundry soap , coating , fevicol , winding thread , winding cloth , fount solution , brown tape , screen printing ink , decoter , german sponge , reducer , winding paper , synthesizer , yellow envelope paper , stapler gun , winding paper , colored paper (70 gsm) , annual contract section , picking wall fiber , pickers , ratchet catch (leaf set) , pressing cam lever lr-101 , wooden steel (no. 29) , wheel gear 14t (no. 62) , bevel gear , worm wheel stud , ratchet catch lever , buffer soldering bracket , buffer strap (leather) , stick cap , bearing , ratchet wheel , warp weaver , worm , parachute rope , fine belt , picking stick , tariff wheel , handloom pickers , fast dyes (for fabric) , powerloom steel reed , yarn 2/40s on cone (coloured/white) , yarn 6s on coloured cone , coloured wool , yarn 2/60s on cone (coloured/white) , jute fabric , yarn 6s on cone , handloom reed (no. 12) , warping machine brake belt (leather) , dari beater/comb (wooden) , emery strip , warp frame hook set , pick/bobbin filling rod (handloom) , cast iron welding rod , temple rod/cover , weft filling needle/hook

Central Government/Public Sector

CTN :45742536

10 Jul, 2026 9.44 Lacs

Korba - Chhattisgarh

Tender For supply of led batten light (led tube light) (v2) (q2) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , pvc insulated copper cable single core and multi core circular sheathed with rigid conductor (v2) isi marked to is 694 (q2) , plasticized pvc tapes with non-thermosetting adhesive for electrical purpose (v2) isi marked to is 7809 (part 3/ sec1) (q2)

corporations/Associations/Others

CTN :45700822

06 Jul, 2026 16.46 Lacs

Ajmer - Rajasthan

Tender For regular operation and maintenance of street lights and high mast light with material for two years at different industrial areas of ajmer zone, amounting to rs. 16.46 lakh - street light repairing work and on/off main switch in industrial areas of ajmer including rewiring of fixtures, changes of ballast, clamp, stater, condenser, tube rods, stater sheet, tube holder, mercury & sodium vapour lamps, ignitor & refixing on poles and change of fixtures, change of main switch, kit kat fuse wherever necessary complete including joining of jumpers, complete repairing of tube light fixtures, mercury vapour and sodium vapour lamp fixture ( all required material will be arranged by the contractor except new fixture). led fixtures., contract for operation and maintenance of high mast light (led fixtures) with material as per enclosed terms and conditions. the scope of work includes operation and maintenance of high mast lights, on and off high mast light, electrical panel, repairs of light with all required materials, replacement of necessary electrical components, cable, timer, contractor etc including excavation for cable and maintaining the light in good condition as per enclosed terms and conditions.

corporations/Associations/Others

CTN :45702242

07 Jul, 2026 17.03 Lacs

Kota - Rajasthan

Tender For regular operation and maintenance of street lights (with material) at all industrial areas under riico ranpur kota(for 2 years) - regular operation and maintenance of high mast light in ranpur , kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register shall be maintained at riico/association office and complaint lodged must be attended by contractor within 24 hours. the person deputed by contractor shall attend the riico/association office daily and comply the instructions and attend complaints regularly. iii contractor will have to employ trained and qualified electricians for the work. iv corporation shall not be responsible for any kind of accident during execution of work. v contractor will be responsible for safety and security of fixtures and all concerned materials. vi contractor will be responsible for arrangement of all t&p required for the work vii cost of all labour and material like lamp / balllast wire etc. will be born by contractor. all material required for the work shall not be below the category-ii of concerned bsr item. contractor has to repair and maintenance of fixture with material in all cases like short circuit, phase to phase of jvvnl line etc. viii no extra payment will be made for fixing/removal of extra/existing fixture in the industrial area. ix contractor will be responsible for timely collection and deposition of electric bills of areas in each month. in case of delay in payment and jvvnl impose surcharge for delay payment the same will be recovered from the running bill fo the contractor. payment of electricity bill will be made by riico. x contractor will be responsible for rebate of timer provided by jvvnl. hence contractor will maintain the on/off system by timer properly. in case no rebate is provided by jvvnl due to failure of timer then rebate will be deducted from contractor payment. xi contractor will be responsible for any theft of electricity through poles and he will make necessary arrangements for this. in case of any theft is found suitable penalty will be imposed on the contractor. xii contractor will maintain cubical panel board and assessories fitted in it. in case of any fault repair/replace of material will be done by the contractor at his own cost. no extra payment will be made on behalf of material. xiii contractor has to keep ready total fixtures. in case of fault of fixture a penalty of rs.100/- per fixture per day will be imposed on the contractor., regular operation and maintenance of street light fixtures hpsv/ hpmv (70w/150w) in ranpur, kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register sh

corporations/Associations/Others

CTN :45734964

06 Jul, 2026 6.48 Lacs

Nagaur - Rajasthan

Tender For operation and maintenance of led street light and high mast with material at industrial area igc parbatsar

corporations/Associations/Others

CTN :45711223

18 Jul, 2026 23.25 Lacs

Thiruvananthapuram - Kerala

Tender For micromanipulator system with accessories - micromanipulator system with accessories. hvac system for ivf lab&ot (air handling unit), battery operated power drill with reamer saw and accessories. syringe pump, advanced phaco emulsifi-cation system, grossing work station, ice lined refrigerator modular operation theatre type b, c-arm mobile image intensifier system model a, c-arm mobile image intensifier system model b. arthroscopy camera & instruments and shaver system model b, blood gas analyzer 500 test/ month, blood gas analyzer 200 test/month linear accelerator (linac) ring gantry. therapeutic apheresis machine, 4k ent video imaging system type ii procurement of consumables for cath lab (category 1) hd laparoscopic system. hd laparoscopic instruments, defibrillator with cardiac monitor, blood collection monitor mobile digital radiography model b. refrigerated incubator for animal husbandry, refrigerated micro centrifuge for animal husbandry. ergometer. active passive exercise system for upper and lower extremity. sperm fuge. microdebrider for ent. pediatric cysto urethroscope 8fr, body box for plethysmography, cycler for performing peritoneal dialysis (capd) type a. semi rigid thoracoscope with camera, light source and display unit, magnetic stirrer, tissue homogenizer, retractor set, lcd vision monitor, normal delivery kits, delivery kits for c-section, whole body phototherapy unit. instruments for vats (video assisted thoracic surgery), nephroscope 19.5fr. drying cabinet, mri compatible basic vital monitor. mri compatible ventilator. intra oral digital radiographic system type b. high frequency neonatal ventillator ments and all other information rela

Batten Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors