Latest battery ammeter Tenders | Government battery ammeter Tenders

CTN :41678387

16 Sep, 2025 NA

Kanchipuram - Tamil Nadu

Tender For corrigendum : rectification of electrical safety defects - supply and installation of electrical danger notice boards conforming to is 2551 1982 and the indian electricity rules, 1956. each board shall be fabricated from mild steel plate not less than 1.6 mm thick, vitreous-enamelled in visible red finish, with lettering, figures, and skull-and-crossbones emblem in signal white. plate size 200 150 mm with rounded corners, suitable for 415 v medium-voltage installations, bearing bilingual wording (english and tamil) centrally spaced as per the standard. fixing holes of suitable diameter for rivets shall be provided at the corners. boards shall be permanently affixed in conspicuous positions on distribution boards and panels using corrosion-resistant rivets or equivalent fasteners. the rate shall be quoted per piece inclusive of supply of board, rivets, and complete affixing, inspection, testing, cleaning, recommissioning, and submission of the test report for the lightning protection system installed on a 30 metre-high ms wireless tower, including the removal and replacement of all associated fasteners on the downcomer gi plate, ensuring full compliance with applicable standards and operational safety requirements. , inspection and testing of earth electrodes; reconditioning and refilling of earth pits; removal of corrosion from contact plates; replacement of fasteners; cleaning of earth pit troughs; correction of wall separators for earth pits; painting with yellow colour; fixing of durable identification labels with red-coloured text in the respective troughs; provision of closure slabs; and submission of test reports along with photographic evidence. walls to be provided newly: 5- earth pits with existing walls: 22, refilling of silica gel in 11 kv/415 v step-down transformer breather, ensuring proper colour indication and complete replacement of exhausted, dehydrated, or saturated silica gel., insulation and safety covering of exposed live terminals in the 125 kva dg set and of the outer surface of the tneb ht meter box using pvc/acrylic insulation sheets of adequate thickness, rating, and appropriate size suitable for the respective voltage levels, ensuring full electrical insulation and compliance with safety standards. size; 30x20 inches-1 no. 12x24 inches-1 no.

State Government

CTN :41646905

08 Sep, 2025 86.0 Thousand

Pathanamthitta - Kerala

Tender For kerala water authority-funds-water quality testing- supply of lab equipments-at konni thazham wtp - procurement of equipments, od121756/2025-2026:supply and installation of microcontroller based ph meter with 3 point calibrationi) ph:-range : 0.00 to 14.00 ph or better resolution: 0.01or better accuracy:+0.02 or -0.02 ph or better calibration points: 3 points minimumbuffer options : standard buffersii) mv:-range :0 to +1999mv resolution: 1 mv or betteraccuracy :+1or- 1mv or betteriii) temperature range : 0.0 to 99 c or better resolution:0.1 c or betteraccuracy :+0.5 c or -0.5 c or betteriv) electrode specification single junction ,body-plastic /unbreakable, gel filled electrode atc probe and electrode stand should also be provided.v) meter features 1) lcd/ led display 2) dual display of ph or mv with temperature 3) with auto buffer recognition 4) off set/slope should be displayed 5) power 230v +10% or -10% 6) buffer solutions 7.0, 4.0. 9.2 ph (100ml minimum) should be provided. 7) should provide all accessories for smooth functioning of the equipment. 8) hard copy of user manual with instrument specification 9) warranty:1 year for the meter and 6 months for electrodecalibration at the time of installation to be done by the supplier., od121755/2025-2026:supply and installation of best quality isi marked digital jar test apparatus with 1) no. of stirrers -6 minimum 2) rpm- 25 to 200 rpm or better 3) capacity of single stirrer unit-1 l 4) control -digital control (digital timer & r.p.m counter) 5) stirrer paddle material (with appropriate corrosion protective coating) - stainless steel 6) power single phase (220 -240 volts) 7) illumination -fluorescent tube ; illumination should not contribute heat to the system. 8) warranty period -2 years installation to be done by the supplier. , od121754/2025-2026:supply and installation of micro controller based digital nephelo turbidity meter specifications:1. range : 0 to 1000ntu 2. range selection manual /automatic 3. resolution . 0.1 ntu or better 4. accuracy +3% or -3% or better 5. calibration : 4 points minimum (manual/auto selection) 6.light source : led/tungsten halogen lamp 7. detector : photodiode 8. display :lcd/led 9. power :230v (+10% or -+10%),50 tom 60-hz 10.accessories matching test tubes(4 nos minimum ) and light shield ,1000ntu solution 500ml minimum 11. instrument manual with specification details(hard copy) 12. warranty 2 years for the entire instrument calibration at the time of installation to be done by the supplier.

State Government

CTN :41646969

08 Sep, 2025 1.72 Lacs

Pathanamthitta - Kerala

Tender For kerala water authority-funds-water quality testing-supply of lab equipment at various wtps under ws section , chiranickal-chiranickal and malankavu wtps - procurement of equipments, od121825/2025-2026: supply and installation of microcontroller based ph meter with 3 point calibrationi) ph:-range : 0.00 to 14.00 ph or betterresolution: 0.01or betteraccuracy:+0.02 or -0.02 ph or bettercalibration points: 3 points minimumbuffer options : standard buffersii) mv:-range :0 to +1999mvresolution: 1 mv or betteraccuracy :+1or- 1mv or betteriii) temperaturerange : 0.0 to 99 c or betterresolution:0.1 c or betteraccuracy :+0.5 c or -0.5 c or betteriv) electrode specificationsingle junction ,body-plastic /unbreakable, gel filled electrodeatc probe and electrode stand should also be provided.v) meter features1) lcd/ led display2) dual display of ph or mv with temperature3) with auto buffer recognition4) off set/slope should be displayed5) power 230v +10% or -10%6) buffer solutions 7.0, 4.0. 9.2 ph (100ml minimum) should be provided.7) should provide all accessories for smooth functioning of the equipment.8) hard copy of user manual with instrument specification9) warranty:1 year for the meter and 6 months for electrodecalibration at the time of installation to be done by the supplier, od121826/2025-2026: supply and installation of micro controller based digital nephelo turbidity meterspecifications:1. range : 0 to 1000ntu2. range selection manual /automatic3. resolution . 0.1 ntu or better4. accuracy +3% or -3% or better5. calibration : 4 points minimum (manual/auto selection)6.light source : led/tungsten halogen lamp7. detector : photodiode8. display :lcd/led9. power :230v (+10% or -+10%),50 tom 60-hz10.accessories matching test tubes(4 nos minimum ) and light shield ,1000ntusolution 500ml minimum11. instrument manual with specification details(hard copy)12. warranty 2 years for the entire instrumentcalibration at the time of installation to be done by the supplier, od121827/2025-2026: supply and installation of best quality isi marked digital jar test apparatus with1) no. of stirrers -6 minimum2) rpm- 25 to 200 rpm or better3) capacity of single stirrer unit-1 l4) control -digital control (digital timer & r.p.m counter)5) stirrer paddle material (with appropriate corrosion protective coating) - stainlesssteel6) power single phase (220 -240 volts)7) illumination -fluorescent tube ; illumination should not contribute heat to thesystem.8) warranty period -2 yearsinstallation to be done by the supplier

State Government

CTN :41647239

08 Sep, 2025 86.0 Thousand

Pathanamthitta - Kerala

Tender For kerala water authority-funds-water quality testing- supply of lab equipments at pampooripara wtp -under ph section pathanamthitta - procurement of equipments, od122174/2025-2026: supply and installation of microcontroller based ph meter with 3 point calibrationi) ph:-range : 0.00 to 14.00 ph or betterresolution: 0.01or betteraccuracy:+0.02 or -0.02 ph or bettercalibration points: 3 points minimumbuffer options : standard buffersii) mv:-range :0 to +1999mvresolution: 1 mv or betteraccuracy :+1or- 1mv or betteriii) temperaturerange : 0.0 to 99 c or betterresolution:0.1 c or betteraccuracy :+0.5 c or -0.5 c or betteriv) electrode specificationsingle junction ,body-plastic /unbreakable, gel filled electrodeatc probe and electrode stand should also be provided.v) meter features1) lcd/ led display2) dual display of ph or mv with temperature3) with auto buffer recognition4) off set/slope should be displayed5) power 230v +10% or -10%6) buffer solutions 7.0, 4.0. 9.2 ph (100ml minimum) should be provided.7) should provide all accessories for smooth functioning of the equipment.8) hard copy of user manual with instrument specification9) warranty:1 year for the meter and 6 months for electrodecalibration at the time of installation to be done by the supplier., od122173/2025-2026: supply and installation of micro controller based digital nephelo turbidity meterspecifications:1. range : 0 to 1000ntu2. range selection manual /automatic3. resolution . 0.1 ntu or better4. accuracy +3% or -3% or better5. calibration : 4 points minimum (manual/auto selection)6.light source : led/tungsten halogen lamp7. detector : photodiode8. display :lcd/led9. power :230v (+10% or -+10%),50 tom 60-hz10.accessories matching test tubes(4 nos minimum ) and light shield ,1000ntusolution 500ml minimum11. instrument manual with specification details(hard copy)12. warranty 2 years for the entire instrumentcalibration at the time of installation to be done by the supplier., od122175/2025-2026:supply and installation of best quality isi marked digital jar test apparatus with1) no. of stirrers -6 minimum2) rpm- 25 to 200 rpm or better 3) capacity of single stirrer unit-1 l4) control -digital control (digital timer & r.p.m counter)5) stirrer paddle material (with appropriate corrosion protective coating) - stainlesssteel6) power single phase (220 -240 volts)7) illumination -fluorescent tube ; illumination should not contribute heat to thesystem.8) warranty period -2 yearsinstallation to be done by the supplier.

CTN :41356633

10 Sep, 2025 42.95 Lacs

Kota - Rajasthan

Tender For corrigendum : supply of spares for wds-6 and wds-4b locomotives at ktps, kota against tn- 20233 --, air glass norgam filter, , ac drive complete assy., , splend shaft for ac drive, , auto drain air release valve suitable for 10kg/cm2, , break vacuum pressure pipe, , break block key for shoe, , breather valve, , seal for air blower, , battery ammeter 0-200amp & dial size-4 inch, , inlet valve for cylinder head, , exhaust valve for cylinder head, , 24, , 12, , carbon bush having cu-lead for main generator pt. no 12425799), , 13 daiphram for break cylinder, , 14 dmr relay 4 tips, , 15 earth fault relay, , 16 exaust mainfold small (cast iron), , 17 exaust mainfold big. (cast iron), , 18 engine control switch (ecs), , 19 o ring for fuel oil pump, , 20 ball for flexible coupling, , 21. fuel primary filter 3584, , 22, , fuel oil pump complete assy., , 23 head light on/off switch, , 24 hs-4 valve, , 26 pr. gauge for brakes (0-05 kg/cm2) dial size 4", , high pr. cu-tube connector fip to injector, , push rod lifter, , horn operating valve, , nozzle for injector, , lube oil priming pump, , lube oil filter 1418, , load ammeter 90mv f.s.d., , n-1 reducing valve, , o.s.t. complete assy, , over speed switch, , 'o' ring for fuel oil level gauge, , oil safety relay, , push road yoke, , push road, , 25, push road cup, , repairing kit for c-2 relay valve, , regulating valve 35 psi, , regulating valve for lube oil 130 psi pt no. 11390074, , regulating valve for lube oil 130 psi pt no. 11810125, , speedometer 0-60 kmph dial size- 4 inch, , secondary filter 3586, , star coupling, , repairing kit for sa-9 valve, , snepher valve between hp tube and head, , universal shaft complete, , vacum gauge 0-75 psi dial size-4 inch, , water pump mechnical seal, , wheel slip relay, , diaphram for bkt, , porceline insulator for bkt, , reverse forward shunt link for bkt, , reverse forward shunt base for bkt, , relief valve for bkt, , spring for bkt, , air governor, , shell bearing for connecting rod, , vaccume valve for crank cage, , discharge valve assembly, , hp piston with all rings., , inlet valve assembly with spring and cap, , lube oil pump, , mechanical seal of cam rod, , 28, , 68 piston ring (oil), , 69 valve guide with cap inlet, , 70 valve guide with cap exhaust, , spares/instruments/accessories for locomoti model wds-4 b/d, , 71 brake release valve, , 72 bulb head light 24w/110 volt, , 73 bulb head light 24w/250 volt, , 74 bulb 24x25 mm screw type, , 75 cover for cylinder head, , 76 compressor valve, , 77 fly ring for cylinder head, , dlw-make/any other equivalent make, , 78 diaphram for air break cylender pt. 11367003, , 79 gasket head exaust pipe pt. 19901813, , 80 gasket head to air inlet pt 13901941, , gasket inspection cover 'o' ring, , hard grease, , priming pump for lube oil, , relay for priming pump lube oil pt. 14480372, , bearing c450068p1, , blower bearing, , m.r. safety valve (10kg/cm2), , m.r. pr. release valve 10kg, , 'o' ring for push rod sleeve, , water pump complete assy, , o ring for injector pt no. 10170832, , o' ring for fuel oil level gauge pt 11981994, , o' ring water jumper, , o' ring push road cup upper, , 95 push rod, , 96 sleeve for push rod, , 30, , 29, , 97 cup for push rod, , 98 quick empty valve for transmission (10kg/cm2), , 99 rocker arm assembly with base, , 100 secondary filter complete with socket(3601), , 101 throttle valve with chain sprocket 4/20/ma 11026, , 102 water jumper for cylinder head, , 103 trasaction card 210, , 104 trasaction card 207, , 105 hose pipe lub oil fiter upper pt no. 11327686, , 106 hose pipe lub oil filter center pt no. 11327716, , 107 hose pipe lub oil filter center pt no. 11377728, , 108 lab oil pump complete assy. (printing pump), , water seal for water pump, , o ring for push road cup (inner & outer)

Central Government/Public Sector

CTN :41489560

06 Oct, 2025 90.22 Lacs

Noida - Uttar Pradesh

Tender For open tender document for e-procurement of laboratory equipment (ndt, epoxy, thermoplastic, sign board and sheeting, metal beam crash barriers) for material testing laboratory of iahe - ndt, pull-off testpull-off tester unit; battery pack; battery charger with usb-cable; test disc aluminum 50mm/m10 100 nos.; draw bolt m10; torx screwdriver; software, operating instructions, certificate of conformity and carrying case., reinforcement corrosion (half-cell potential measurements apparatus), homogeneity & quality test (ultrasonic pulse velocity apparatus), cover meter test(full set of equipments), epoxy, viscosity testfull set of equipment, pot lifefull set of equipment, bond strength test (epoxy)full set of equipment, shear strengthfull set of equipment, thermoplastic, luminance test night visibility (rl) and day visibility (qd), retro reflectivity of road markingsretroreflectometer for road markings, thickness test for thermo plastic road markings ( 2 in nos.), sign board and sheeting, co-efficient of retro-reflection test of retro reflective sheeting, retro-reflective sign & boards sheetingretro reflectometer for signages, metal beam crash barriers, thickness gauge test ( 2 in nos.)

State Government

CTN :41496185

08 Sep, 2025 7.77 Lacs

Palakkad - Kerala

Tender For corrigendum : kerala water authority funds deposit supply and installationof lab equipments for maintaining quality standards in various schemes under p h division palakkad - supply of lab equipments to various wss and rwss under p h division palakkad, od114374/2025-2026:supply and installation of jar test apparatus with the specifications are (1). number of stirres - 6 minimum, (2). rpm- 25 to 200 rpm or better, (3). capacity of single stirrer unit- 1 l, (4). control -digital control (digital timer & r.p.m counter), (5). stirrer paddle material (with appropriate corrosion protective coating) - stainless steel, (6). power single phase (220 - 240 volts), (7). illumination -fluorescent tube ; llumination should not contribute heat to the system, (8). warranty period -2 years. etc; complete., od114368/2025-2026:supply , installation and calibration of digital nephelo turbidity meter with the specifications are ; (1). range : 0 to i000ntu , (2). range selection : manual /automatic , (3). resolution : 0.1 ntu or better , (4). accuracy : +or- 3% or better, (5). calibration : 4 points minimum (manual/auto selection) , (6). light source : led/tungsten halogen lamp , (7). detector : photodiode , (8). display : lcd/led , (9). power : 230v +or- 10 % , 50 to 60hz, (10). accessories: matching test tubes(4 nos minimum ) and light shield, l000ntu solution 500 ml minimum, (11). instrument manual with specification details(hard copy) , (12). warranty : 2 years for the entire instrument etc ; complete., od114367/2025-2026:supply , installation and calibration of bench top ph meter with the specifications are (i). ph - range : 0.00 to 14.00 ph or better, resolution : 0.01or better, accuracy : +or- 0.02 ph or better, calibration points : 3 points minirnum, buffer options : : standard buffers (ii). mv - range : 0 to +or- l999mv, resolution : i mv or better, accuracy : + or - 1 mv or better (iii). temperature - 0.0 to 99 degree c or better, resolution : 0.1 degree c or better, accuracy : + 0.5 degree c or better (iv). electrode qpecification: single junction ,body-plastic /unbreakable, gel filled electrode atc probe and electrode stand should also be provided. (v). meter features - 1) lcd i led display, 2) dual display of ph or mv with temperature , 3) with auto buffer recognition, 4) off set/slope should be displayed , 5) power 230v +or - 10%, 6) buffer solutions 7 .0, 4.0, 9.2 ph (100m1 minimum) should be provided, 7) should provide all accessories for smooth functioning of the equipment, 8) hard copy of user manual with instrument specification, 9) warranty: 1 year for entire insruments etc; complete., od114377/2025-2026:supply of laboratory equipments including electronic weighing balances,etc. with 2 year warrenty including conveyance charges, od114750/2025-2026:supply and installation of digital conductivity meter 308 with the specifications are (i). conductivity - 1). range : 0.1 us to 100 ms (6 decadic ranges) , 2). accuracy : +or - 1% of fs + or - digit. 3). resolution : 0.001 micro.s (ii). tds - range : 0.1ppm to 100 ppt (6 decadic ranges ), accuracy : + or - 1% of fs (iii). temperature - temperature : 0 degree c to 100 degree c( auto / manual ), resolution : 0.1 degree c. , accuracy : + or - 0.2 degree c. etc; complete with 2 year warrenty, od114370/2025-2026:supply of buffer solution for ph 4 and ph 7(500ml bottle)

CTN :41509795

10 Sep, 2025 42.95 Lacs

Kota - Rajasthan

Tender For corrigendum : tn-20233 supply of spares for wds-6 and wds-4b locomotives - air glass norgam filter, ac drive complete assy., splend shaft for ac drive, auto drain air release valve suitable for 10kg /cm2, break vacuum pressure pipe, break block key for shoe, breather valve, seal for air blower, battery ammeter 0-200amp & dial size-4 inch, inlet valve for cylinder head, exhaust valve for cylinder head, carbon bush having cu - lead for main generator (dlw pt. no 12425799), daiphram for break cylinder, dmr relay 4 tips, earth fault relay, exaust mainfold small (cast iron), exaust mainfold big. (cast iron), engine control switch (ecs), o ring for fuel oil pump, ball for flexible coupling, fuel primary filter 3584, fuel oil pump complete assy., head light on/off switch, hs-4 valve, pr. gauge for brakes (0 - 05 kg/cm2) dial size 4", high pr. cu - tube connector fip to injector, push rod lifter, horn operating valve, nozzle for injector, lube oil priming pump, lube oil filter 1418, load ammeter 90mv f.s.d., n-1 reducing valve, o.s.t. complete assy., over speed switch, o ring for fuel oil level gauge, oil safety relay, push road yoke, push road, push road cup, repairing kit for c-2 relay valve, regulating valve 35 psi, regulating valve for lube oil 130 psi pt no. 11390074, regulating valve for lube oil 130 psi pt no. 11810125, speedometer 0 - 60 kmph dial size- 4 inch, secondary filter 3586, star coupling, repairing kit for sa-9 valve, snepher valve between hp tube and head, universal shaft complete, vacum gauge 0-75 psi dial size-4 inch, water pump mechnical seal, wheel slip relay, diaphram for bkt, porceline insulator for bkt, reverse forward shunt link for bkt, reverse forward shunt base for bkt, relief valve for bkt, spring for bkt, air governor, shell bearing for connecting rod, vaccume valve for crank cage, discharge valve assembly, hp piston with all rings, inlet valve assembly with spring and cap, lube oil pump, mechanical seal of cam rod, piston ring (oil), valve guide with cap inlet, valve guide with cap exhaust, dlw-make/any other equivalent make spares/instruments /accessories for locomotives model wds-4 b/d, brake release valve, bulb head light 24w/110 volt, bulb head light 24w/250 volt, bulb 24x25 mm screw type, cover for cylinder head, compressor valve, fly ring for cylinder head, diaphram for air break cylender pt. 11367003, gasket head exaust pipe pt. 19901813, gasket head to air inlet pt 13901941, gasket inspection cover o ring, hard grease, priming pump for lube oil, relay for priming pump lube oil pt. 14480372, bearing c450068p1, blower bearing, m.r. safety valve (10kg/cm2), m.r. pr. release valve 10kg, o ring for push rod sleeve, water pump complete assy., o ring for injector pt no. 10170832, o ring for fuel oil level gauge pt 11981994, o ring water jumper, o ring push road cup upper, push rod, sleeve for push rod, cup for push rod, quick empty valve for transmission (10kg/cm2), rocker arm assembly with base, secondary filter complete with socket(3601), throttle valve with chain sprocket 4/20/ma 11026, water jumper for cylinder head, trasaction card 210, trasaction card 207, hose pipe lub oil filter upper pt no. 11327686, hose pipe lub oil filter center pt no.11327716, hose pipe lub oil filter center pt no. 11377728, lab oil pump complete assy.(printing pump), water seal for water pump, o ring for push road cup (inner & outer)

corporations/Associations/Others

CTN :40420978

16 Sep, 2025 3.27 Lacs

Kasimpur - Uttar Pradesh

Tender For corrigendum : procurement of lab instruments for chemical lab of ogcd, dtps, htps, kasimpur - sension5 portable conductivity meter specification range:#conductivity s/cm 0 to 19.99; 200 to 1999#conductivity ms/cm 2 to 19.99; 20 to 199.9#tds: 0 to 50,000 mg/l as nacl salinity: 0 to 42 g/l (ppt)#temperature: -10.0 to 105.0 c#resolution:#conductivity 0.01; 1.0#conductivity ms/cm 0.01; 0.1#tds: 0 .00-199.9 mg/l 0.1mg/l 2 00-1999 mg/l 1 mg/l 2 .00 -19.99 g/l 0.01 g/l 2 0-50 g/l 0.1g/l #salinity: 0.1 g/l (ppt)#temperature: 0.1 c#accuracy:#conductivity: 0.5% in the first 3 ranges, 1% at highest range #td of full scale #salinity: 0.1 ppt (-2 to 35 c) #temperature: 0.1 c# , make-hach, ph meter probe (ph meter sension ph3) cat no-lzw5010t.92.0002 make hachdetails in photograph enclosed in tender document, manual sieves shaker (with sieves set - mesh size-50,+100,+200) any standard make details in photograph enclosed in tender document, centrifugal machine for oil testing, any standard maketube capacity:no.12-24:size 15 mlshould have a digital timerbody should be made of strong fabricated & corrosion resistant steel.control panel- for start/stop switch, dynamic brakes, step less speed regulator with zero start switch & speed indicator with timer and protective fuses.door interlock.maintenance free brushless drive motor with exact speed preselection and display. speed range 100 to3000 rpm and above, accuracy 1 rpm. details in photograph enclosed in tender document, orset appratus (complete set), any standard make details in photograph enclosed in tender document, ph 2700 ph meter specification #ph range -2.000 to 20.000 ph #resolution 0.1 / 0.01 / 0.001 ph #accuracy 0.002 ph + 1 lsd #cal. points up to 6 preset or 5 custom #buffer sets usa, nist, din, user 1, user 2, custom #or range 2000.0 mv #rel. mv range 2000.0 mv on 0.1 mv# accuracy 0.2 mv #temperature,range (meter) 0.0 to 100.0 c / 32.0 to 212.0 f #resolution 0.1 c / 0.1 f #accuracy 0.3 c / 0.5 f #compensation atc / mtc #power requirements 9 v dc adapter, 1.3 a (100/240 vac, smps)# make- eutech

Battery Ammeter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

State Government

corporations/Associations/Others