Latest battery clamp Tenders | Government battery clamp Tenders

Central Government/Public Sector

CTN :45550383

10 Jul, 2026 NA

Kapurthala - Punjab

Tender For set of carline for lhb bangladesh non ac chair car coaches note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25wecbgcarline version 2, packing instruction: pi185 version 02 carline assly:- the supplier shall pack theone c/set (segments) of carlines in a suitably designed robust returnable mettalic cage/ structure in such a way that carlines shall not get entangled, damaged, twisted , dented during transportation, storage, handling and lifting and to avoid scratches onouter surface suitable enviroment friendly cushioning material is to be placed between two segmemts. transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate one tonne material load in static & moving condition of one coach set of carline. the bottom part of this packing cage//pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accomodate fork lifter arms for lifting & transportation. it should have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it shouldhave firm's dentification/colour mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description , drg no./spec., qty., firm's name & address and despatch date etc. for identification. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45549222

14 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of set of cutter chain assembly to plasser part no.re.14.185 or its equivalent consists of 13 items suitable for plasser make frm machines. each set of cutter chain assembly consists of 13 items with quantity and additional quantity for each item per set are as follows. 1. link to plasser part no. su.1702.21.1.3.1 or equivalent - 43 nos. with additional quantity of 5 nos. and to a total quantity of 48 nos. 2. intermediate link to plasser part no. su.1702.21.1.3.2 or equivalent - 43 nos. with additional quantity of 5 nos. and to a total quantity of 48 nos.3. bolt to plasser part no. 656.08.1050 or equivalent - 86 nos. with additional quantity of 20 nos. to a total quantity of 106 nos. 4. roller to plasser part no. su.127.21.4.1.6b or equivalent - 172 nos. with additional quantity of 20 nos. to a total quantity of 192 nos. 5. bush to plasser part no. su.127.21.4.1.5 or equivalent - 172 nos. with additional quantity of 20 nos. to a total quantity of 192 nos 6. clamping bush to plasser part no. 656.080.1040 or equivalent - 86 nos. with additional quantity of 40 nos. to a total quantity of 126 nos. 7. plate to plasser part no. re.14.185-7 (with 02 brackets to plasser part no: 9/064533 welded on the each plate) or equivalent - 21 nos. with additional quantity of 5 nos. to a total quantity of 26 nos. 8. plate to plasser part no. re.14.185-8 (with 02 brackets to plasser part no: 9/064533 welded on the each plate) or equivalent - 22 nos. with additional quantity of 5 nos. to a total quantity of 27 nos. 9. hexagonal bolt to plasser part no. m16 x 60 din 933-10.9/verz or equivalent - 86 nos. with additional quantity of 86 nos. to a total quantity of 172 nos. 10. hexagonal bolt to plasser part no. m16 x 85 din 933-10.9/verz or equivalent - 86 nos. with additional quantity of 86 nos. to a total quantity of 172 nos. 11. safety nut to plasser part no. m16 din 985-8 or equivalent - 172 nos. with additional quantity of 172 nos. to a total quantity of 344 nos. 12. cap to plasser part no. 9/064538 or equivalent - 86 nos with additional quantity of 100 nos to a total quantity of 186 nos. 13. fuse to plasser part no. 9/062380 or equivalent - 86 nos with additional quantity of 100 nos to a total quantity of 186 nos. [acceptable make - plasser or equivalent]. material specification: the material of the cutter chain assembly shall conform to rdso specification tm/hm/6/62 (1993 & 1995) or latest and dimensions shall conform to rdso drawing no.tm/9422/1 and tm/9422/2 or latest if any. ]

State Government

CTN :45520196

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33kv rewan bay with supply of material, integration and remote gateway work at 220kv ss bangra under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

State Government

CTN :45520197

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33 kv birdha bay with supply of material, integration and remote gateway work at 220kv ss birdha under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

CTN :45543687

23 Jun, 2026 NA

Palakkad - Kerala

Tender For supply of 150220119003 -battery clamp assy

CTN :45537217

22 Jun, 2026 1.96 Lacs

Leh - Jammu And Kashmir

Tender For supply of hand grinder machine,rubber gloves,bench vice medium,bty charger,ballistic goggle for technicians,combination tool kit,cusion grip screw dvr set,46 pcs socket set,battery clamp,diesel injector tester,socket set taparia,socket set taparia,vice armour,storage rack for tech mannual,hand grinder bosch,multi jet part cleaner,drill machine,blower,screw dvr set 16 pcs,basic electronic kit,socket set stanly,magnification glass

CTN :45326601

17 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For corrigendum : supply of equipment for logistics department - paper tearing test measuring range 0 to 1000 mn capacity resolution 0.1 mn indication error 1 % tearing arm 104 1 mm tearing angle 27.5 0.5 tearing distance 43 0.5 mm, paper puncture testing machine energy range of weights - 6, 12, 24 joule per meter accuracy - 2% within full range release angle of pendulum - 90 display - led (digital) 7 segment power - 220v, 50hz,single phase highlights: sample holder - 1 pendulum release mechanism -manual material -mild steel finish - powder coated havel gray & gray combination finish and bright chrome/zinc plating for corrosion resistant finish, weighing machine max capacity (max) maximum load the scale can measure. (3 kg ), min capacity (min) minimum load required for accurate measurement. (0.25 kg), 0.1 g 1 g resolution, sling psychrometer, bursting strength tester capacity: commonly 0 40 kg/cm . accuracy: +or -1 % of the full range (often within 10% to 90% of capacity). resolution: 0.1 kg/cm . operation: microprocessor-based, digital display (lcd/led) with peak hold test fluid: glycerin (approx. 98% purified). power requirement: 220v, single phase, 50 hz. memory. clamping: pneumatic or manual, often with 1/4 hp motor. fluid displacement rate: 95 + or 5 cc/minute., digital micrometer (0-25mm with least count 0.0010) (0 25 mm, 0.001 mm), digital vernier caliper (0-150mm)

Central Government/Public Sector

CTN :45407106

01 Jul, 2026 NA

Kapurthala - Punjab

Tender For set of carline for memu dmc 3-phase coaches with high rise panto & tcas facility, as per drawing: mp26cardmc version 0, packing instruction: carline assly the supplier shall pack the three c/set (segments) of carlines in a suitably designed robust returnable metallic cage/structure in such a way that carlines shall not get entangle, damaged, twisted, dented during transportation, storage, handling and lifting and to avoid scratches on outer surface suitable environment friendly cushioning material is to beplaced between two segments, transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accommodate fork lifter arms for lifting and transportation. it should have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's identification/color mark. the packing cages along withset of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45454150

14 Jul, 2026 NA

Ajmer - Rajasthan

Tender For supply installation and commissioning of exothermic cutting equipment as per attached annexure - cutting torch with accessories, striker plate with 5' long power cable, hose and cable extension kit 30' long, cutting rod extender 18", oxygen regulator, battery clamps with quick connect, collets 3/16",1/4", 3/8" and ½", cutting rod 4"x18", cutting rod 3/8"x18", cutting rod 3/8"x36", under water cutting rod 3/8"x18", safety items for operator-goggles, head shield, gloves, tool kit, operating manual, storage and carrying case

Central Government/Public Sector

CTN :45453568

15 Jun, 2026 NA

Kapurthala - Punjab

Tender For set of final roof element for ac 2 tier with flat roof (md901), as per drawing:mp25freac2tf version 1, packing instruction: 1. the supplier shall pack the final roof element in a suitably designed returnable fixture in such a way that final roof element shall not get scratched, damaged, twisted during transportation, storage and lifting andto avoid scratches on outer surface. it should be wrapped with enviroment friendly material and it should have standard clamping /fastening mechanism so that it can be opened easily. it should have firm's identification mark. 2. first returanable fixture along with final roof element be retained by rcf & this fixture shall be exchanged in the second lot supply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated having sufficient strenght to bear approximate 1 tonne load in static & moving condition of five coach set of final roof element. 4. the fixture /frame/pallet should be designed so that the packed final roof element preferably remain in horizontal position to minimize surface area. 5. it should also be suitable for storage of final roof element under open sky. [ warranty period: 30 months after the date of delivery ] ]

Battery Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector