Web Analytics Made Easy - StatCounter

Battery Connector Tenders

Get complete information related to latest Battery Connector Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Battery Connector Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Battery Connector Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :45298008 Due date: 01 Jul, 202601 Jul, 2026 NA
Tender For bid to ras supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , supply and fixing on load change over switch ss enclosure complete with capacity 200 amp, 415 volt, 4 pole, 50 hz. , supply and fixing sheet metal enclosure spn db double door having facility to fix mcb spn as incomer and mcbs as outgoing, spn 4 ways, ip-43 , supply and fixing sheet metal enclosure tpn db double door having facility to fix mcb tpn as incommer and mcbs as outgoing tpn 4 ways, ip-43 , supply and fixing bus bar chamber 100 amp, 4 way, 415 volts enclosurre is made from crca sheet of thickness 3.15mm crca sheet cover , supply and fixing of straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade nominal cross sectional area not exc.50 sqmm, 3.5 by 4 core , supply and fixing straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade cross sectional area 240 sqmm to 300 sqmm, 3.5 core. , supply and fixing end termination epoxy cable joint kit including jointing materials for making joints of ug electric cable 1100 v grade nominal cross sectional area 240 sqmm to 300 sqmm, 3.5 core , supply and fixing of galvanised iron pipe 100 mm bore dia light grade for protection of ug cable , supply of digging nad layingg in excavation trenches not exc. 1.50 m wide and not exc. 1.50 m in depth, complete all as specified and directed. , returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft loose soil , supply and fixing of galvanised iron pipe 40 mm bore dia light grade for protection of ug cable , supply, installation, commissioning and testing including providing all necessary electrical connection,lt feeder panel board of size 1.0 m x 0.6 m x ) /bid number : gem/2026/b/7568567 * /dated: 22-05-2026 & & / bid document 1 / 30 & & ' ' /item category 0.5 m , supply, installation, commissioning and testing including providing all necessary electrical connections lt feeder panel board of size 0.6 m x 0.6 m x 0.5 m , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick.complete all as specified and directed in boq spec file , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick. complete all as specified and directed in boq spec file , supply and fixing of sub-class b brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for ug cable protection, complete all as specified and directed. , supply and fixing horizontal boring under a depth of 0.65 m from the gl for passing pipe upto 40 mm bore dia , supply of digging and laying of removing excavated materials soils not exc. 50 m and depositing where directed at a level not exc.1.50 m , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 300 sqmm including bricks, gi pipes etc. , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 50 sqmm 3.5 core including bricks, gi pipes etc. , supply of digging and laying of sand cushioning dry in trenches for protection of ug cables below, above and around the ug cable laid in trenches of 230 mm spread thickness , cutting road by hard standing and making good disturbed surfaces by using pcc type-c2,1-3-6 by using 40 mm graded stone aggregate , boring of holes under road,pavement,hard standing by trenchless technology using ultra sounding technique including hdpe pipe 150 mm dia suitable for 0.4 mpa working pressure , cutting chases, chipping in making good to facings, where required and pointing in cement mortar 1- 3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels etc. , submain wiring comprising single core 2 runs of 6 sqmm nominal coss sectional area frlh

CTN :45423602 Due date: 29 Jun, 202629 Jun, 2026 NA
Tender For bid to ras supply of led batten light (led tube light) (v2) (q2) , led luminaire for floodlight conforming to is 10322 (part 5/section 5) (v3) (under bis scheme - ii) (q2) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , self ballasted led lamps (led bulb) (v3) conforming to is 16102 (part 2) (under bis scheme - ii) (q2) , xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , astronomical time switch based on lux level , bell ding dong call bell , bell push 6 amp piano type , cable lugs alumn 120 sqmm , cable lugs alumn 150 sqmm , cable lugs alumn 185 sqmm , cable lugs alumn 25 sqmm , cable lugs alumn 35 sqmm , cable lugs alumn 50 sqmm , cable lugs alumn 95 sqmm , cable pvc insulated copper single core 2 point 5 sqmm , cable pvc service al 2 core x 10 sqmm , cable pvc service al 2 core x 4 sqmm , cable pvc service al 2 core x 6 sqmm , mcb sp 25 amps , mcb 4 pole 40 amp , mccb 100 amps 4 pole 25 ka , mccb 200 amps 35 ka 4 pole , mccb 250 amps 35 ka 4 pole , ht 11 kv heat shrink straight through jointing kit for cable 95 sqmm , booster pump 1 hp single phase , cable copper 25 sqmm single core , cable copper 35 sqmm single core , cable copper 50 sqmm single core , lugs copper 25 sqmm , lugs copper 35 sqmm , lugs copper 50 sqmm , lugs copper 70 sqmm , flat copper cable 10 sqmm 3 core for submercible , flat copper cable 6 sqmm 3 core for submercible , mcb 4 pole 63 amp c series , hrc fuse 100 amp with copper lever , hrc fuse 200 amp with copper lever , ht cable end joint heat shrink outdoor of size 120 sqmm , ht cable end joint heat shrink outdoor of size 95 sqmm , ht 11 kv heat shrink straight through jointing kit for cable 120 sqmm , led bollard light 12 watt , led gate light 12 watt outdoor waterproof , led recessed luminer light 16 watt , led recessed mounted panel light 18 watt , power contactor 4 pole 70 amp , pvc insulated frlsh single core copper conductor 4 sqmm size , socket 16 amp flush type , socket 6 amp flush type , ht fuse element 11 kv voltage grade 10 amp , pvc tape roll 40 mm , led street light driver 45 watt , led street light driver 60 watt , on load change over switch 4 pole 40 amp with encloser , on load change over switch 4 pole 630 amp with encloser , mccb 400 amps 50 ka 4 pole

CTN :45214244 Due date: 29 Jun, 202629 Jun, 2026 NA
Tender For bid to ras supply of 12 core unarmoured ofc for laying , hdpe pipes 32 mm for laying , fiber distribution frame rack type , fiber termination box rack type , route marker , chamber , straight joint enclosure with splicing and jointing kit , patch cord 10 mtrs long , pigtails 10 mtrs long , 0 db pad , gi pipe 50mm , ofc power meter , multi service optimux , laying digging, trenching and refilling of ofc as per bsnl norms , row charges

State Government

CTN :45695199 Due date: 10 Jul, 202610 Jul, 2026 4.99 Crore
Tender For tender for establishment of centre of excellence in electrical vehicle power train technologies at vtu regional centre, bengaluru - servo motor rotating arm e, propeller fin e, battery connector e, jumper pin header e, battery holder e, usb cable e, button cap (large)passive elements, button(small) passive elements, button(large)passive elements, potentiometer(10ko)passive elements, switchpassive elements, capacitor(10uf)passive elements, capacitor(104)passive elements, resistor(10ko)passive elements, resistor(1ko)passive elements, resistor(220o)passive elements, big blue led active elements e, big yellow led active elements e, big green led active elements e, big red led active elements e, rgb led active elements e, active elements 1n4001 diode, active elements 1n4148 diode, pnp transistor(8550) active elements, npn transistor(8050) active elements e, relay active elements e, active buzzer active elements ev, motor driver e, seven segment display e, lcd display e, dc motor e, servo motor e, jumper wires e, tx/rx module e, tilt sensor e, ultrasonic sensor holder e, light sensor e, ultrasonic proximity sensors e, analog temparature sensors e, breadboards e, uno board e, usb cable for stm32 board e, ecu board, stm32 discovery board e, battery cell making machine, integrated electronics workstation, pcb design equipment, dynamometer 2w, electrical vehicle motors and drives workbench, battery management system (bms) training module e, model-based development (mbd) real-time controller, power electronics training bench, off board charger control board, pe-pp control panels, pdi unit, dc converters, drive axles, wheel axles, foot throttle e, auxiliary battery, relay e, harness, wheels e, differential e, moter ev, bms e, vcu e, mcu e, on board charger, battery pack e, naked chassis, belt pulley e, female type 6 charging socket e, front wheel axle ev, front wheel rim ( 12 inch) e, tubeless tyres e, main stand ev, side stand ev, mid - drive chassis e, switches ignition, horn, indicator, head light ev, cone-set ev, handle bar ev, t-stamp ev, fork ev, smart charger can ev, dc dc converter ev, swing arm ev, vcu ev, brake sensors ev, display ev, wiring harness ev, throttle (re twistable) ev, mid drive motor 3kw and pull belt e, mcu 120a e, battery 4kw nmc ev, cordless drill machine tools ev, tool kit trolley tools e, pipe wrench tools e, screwdriver 803 tools e, taparia screw driver 863 200 tools ev, taparia philips s/d psc862250 tools ev, taparia screw driver 861 100 tools e, installation tape tools ev, soldering gun tools e, multimeter tools e, hammer - 40mm nylon tools ev, hammer - 500g tools ev, chissel tools ev, tools 24pc socket set box, long circlip plier outer tools ev, long circlip plier inner tools ev, t spanner 14mm tools ev, t spanner 12mm tools ev, t spanner 10mm tools e, t spanner 8mm tools ev, t spanner 7mm tools ev, connector - 902 tools ev, tester tools ev, nose plier tools ev, monkey plier tools e, wise grip plier tools e, cutting plier tools e, wire cutter tools e, screw driver 2 in 1 - 903ibt tools ev, ring spanner set tools ev, double end spanner set tools ev, t allen key 3,4,5,6 mm tools ev, l allen key set tools ev, motor hall phase tester ev, continuity tester ev, safety helmet, programmable mcu, clamp meter ev, taco meter ev, mid drive mcu, hub motor mcu, hall sensor ev, mid drive stator, hub drive stator, induction stator, bldc stator, mid drive rotor, hub drive rotor, induction rotor, bldc rotor, induction motor, brush motor, shaft drive motor ev, bldc motor, pmsm motor, ev 4w - car, ev 3w - auto ev, ev2w - shaft drive - full vehicle, ev 2w - hub drive full vehicle ev, ev 2w - mid drive - full vehicle ev, ev 2w - hub drive - full vehicle ev, ev 2w - mid drive - full vehicle, ev 2w - hub drive - full vehicle, eight channel 3 amps cdc cell grading machine, cells bolt, cell 3.2 v 100ah lfp, hot air blower ev, green 100mm insulation, clamp meter 0-600 amps, battery tester, bus bars, screw gauge ev, silicon black, bla

State Government

CTN :45684098 Due date: 24 Jul, 202624 Jul, 2026 4.72 Crore
Tender For tender for establishment of centre of excellence in electrical vehicle at vtu regional centres of muddenahalli, mysuru, kalaburgi and talakal - servo motor rotating arm, propeller fin, battery connector, jumper pin header, battery holder, cable usb, button cap large passive elements, button small passive elements, button large passive elements, potentiometer(10ko) passive elements, switch passive elements, capacitor(10uf) passive elements, capacitor(104) passive elements, resistor(10ko) passive elements, resistor(1ko) passive elements, resistor(220o) passive elements, big blue led active elements, big yellow led active elements, big green led active elements, big red led active elements, rgb led active elements, diode active elements 1n4001, diode active elements 1n4148, pnp transistor 8550 active elements, npn transistor(8050) active elements, relay active elements, active buzzer active elements, motor drivers, seven segment display, lcd display, dc motor, servo motor, m to m jumper wires, f to f jumper wires, m to f jumper wires, tilt sensor, ultrasonic sensor holder, light sensor, ultrasonic proximity sensors, analog temparature sensors, breadboards, uno board, tx/rx module, usb cable for stm32 board, stm32 discovery board, basic can bus protocol training system, elecetrical vehicle charging technology bench, multi mcu trainer kit (with banana plug-ins), power electronics pre-build kit, permanent magnet synchronous motor with regen, differential gear training model (ev auto), ev wiring and harness system mock layout (2-wheeler), four wheeler simulator pmsm / bldc motor kit, battery management system (bms) training module, belt pulley, female type 6 charging socket, front wheel axle, front wheel rim ( 12 inch), tubeless tyres, main stand, side stand, mid - drive chassis, switches ignition, horn, indicator, head light, cone-set, handle bar, t-stamp, fork, smart charger can, dc-dc converter, swing arm, vcu, brake sensors, display, wiring harness, throttle (re twistable), mid drive motor 3kw and pull belt, mcu 120a, battery 4kw nmc, cordless drill machine tools, tool kit trolley tools, pipe wrench tools, screwdriver 803 tools, taparia screw driver 863 200 tools, taparia philips s/d psc862250 tools, taparia screw driver 861 100 tools, installation tape tools, soldering gun tools, multimeter tools, hammer - 40mm nylon tools, hammer - 500g tools, chissel tools, socket set box 24pc tools, long circlip plier outer tools, long circlip plier inner tools, t spanner 14mm tools, t spanner 12mm tools, t spanner 10mm tools, t spanner 8mm tools, t spanner 7mm tools, connector - 902 tools, tester tools, nose plier tools, monkey plier tools, wise grip plier tools, cutting plier tools, wire cutter tools, screw driver 2 in 1 - 903ibt tools, ring spanner set tools, double end spanner set tools, t allen key 3,4,5,6 mm tools, l allen key set tools, regulated power supply, motor hall phase tester, continuity tester, helmet, clamp meter, taco meter, hall sensor, shaft drive motor, bldc motor (cut section), pmsm motor (cut section), four wheelar car, shaft drive 2w full vehicle naked, mid drive 2w full vehicle 1, hub drive 2w full vehicle 1, hub drive 2w full vehicle naked 1, mid drive 2w full vehicle, mid drive 2w full vehicle naked, hub drive 2w full vehicle, hub drive 2w full vehicle naked, lfp cells 3.2 v 100 ah, hot air blower, screw gauge, black 12 awg wire, red 12 awg wire, hly cells, chogori 4+2 female connector, chogori 4+2 male connector, crimper, iec female connector, iec male connector, anderson sb50, safety gloves, safety glasses, duct tape 55mm, filament tape 55mm, kapton tape 55mm, lead, cell holder 2x2 - 32650, cell holder 2x2 - 21700, cell holder 2x2 - 18650, nickel strip - 32650, nickel strip - 21700, nickel strip - 18650, lfp cells 3.2 v 6 ah - 32650, nmc cells 3.7 v 4 ah - 21700, nmc cells 3.7 v 2.5 ah - 18650, spot welding machine 1kva (pneumatic), active balancer 24s 10 amps, ir tester

CTN :45445126 Due date: 08 Jul, 202608 Jul, 2026 NA
Tender For corrigendum : expression of interest (eoi) from any reputed manufacturers for budgetary quotations for supply of electrical equipment materials within the jurisdiction of dhbvnl on for destination basis- heat shrinkable termination kit for 11 kv xlpe cable (outdoor type) , 3cx50mm2 , 3cx95mm2 , 3cx120mm2 , 3cx185mm2 , 3cx300mm2 , 3cx400mm2 , scx630mm2 , heat shrinkable termination kit for 11 kv xlpe cable (indoor type) , 3cx50mm2 , 3cx95mm2 , 3cx120mm2 , 3cx185mm2 , 3cx300mm2 , 3cx400mm2 , scx630mm2 , 11 kv 3/c cable heat shrink type straight through joint of sizes , 3/cx50mm2 cable , 3/cx95mm2 cable , 3/cx120mm2 cable , 3/cx185mm2 cable , 3/cx300mm2 cable , 3/cx400mm2 cable , s/cx630mm2 cable , sleeve , sleeve, 11 kv insulated medium voltage line cover (mvlc) for acsr conductor (sleeve) suitable for size upto 100 mm2 as per nigam's technical specification /relevant iss and latest amendments thereof , un-armoured copper control cable , 2c x 4mm2 , 2c x 6mm2 , 3c x 4mm2 , 4c x 4mm2 , 6c x 4mm2 , 7c x 2.5mm2 , 10c x 2.5mm2 , lt xlpe armoured cable , lt xlpe mm2 cable un-armored 1c*300 , lt xlpe armoured 2c*16 mm2 cable , 33 kv ht tr-xlpe cable , 3/c 300mm2 , 3/cx400mm2 , 11 kv h.t. tr-xlpe cables , 11 kv 3c*400 mm2 tr-xlpe armoured cable(hdpe extruded cable duct) co- , 11 kv 3c*300 mm2 tr-xlpe armoured cable(hdpe extruded cable duct) co-, , 11 kv 3c*185 mm2 tr-xlpe armoured cable(hdpe co-extruded cable duct), , lt feeder panel and lt switchgear, , 400 amps acb, 4 pole, manual operated, fixed type with enclosure, , 200 amps mccb with enclosure, , 100 amps mccb with enclosure, , 7 way distribution feeder panel with 2 nos. mccbs, 4 pole, 3phase, 415 v, 400 amps for incoming and 5 nos. outgoing mccbs 4 pole, 3phase, 415 v, 100 amps rating type suitable for outdoor installation, in accordance with technical specification (type-d), , 33 kv rmus, , outdoor type 33 kv sf6 type extensible and motorized 5 way rmu (2lbs+3vcb) with fpi as per is (without frtu) with the provision of self-powered supply through 1 kva aux transformer (33/0.230 kv) as per ts, , outdoor type 33 kv sf6 type extensible and motorized 5 way, , outdoor type 33 kv sf6 type extensible and motorized 4 way rmu (2lbs+2vcb) with fpi as per is (without frtu) with the provision of self-powered supply through 1 kva aux transformer (33/0.230 kv) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 4 way rmu (2lbs+2vcb) with fpi as per is (without frtu) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 3 way rmu (2lbs+1vcb) with fpi as per is (without frtu) with the provision of self-powered supply through 1 kva aux transformer (33/0.230 kv) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 3 way rmu (2lbs+1vcb) with fpi as per is (without frtu) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 3 way rmu (1lbs+2vcb) with fpi as per is (without frtu) with the provision of self-powered supply through 1 kva aux transformer (33/0.230 kv) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 3 way rmu (1lbs+2vcb) with fpi as per is (without frtu) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 3 way rmu (3lbs) with fpi as per is (without frtu) with the provision of self-powered supply through 1 kva aux transformer (33/0.230 kv) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 3 way rmu (3lbs) with fpi as per is (without frtu) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 2 way rmu (2lbs) with fpi as per is (without frtu) with the provision, , of self-powered supply through 1 kva aux transformer (33/0.230 kv) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 2 way rmu (2lbs) with fpi as per is (without frtu) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 2 way rmu (2lbs) with fpi as per is (without frtu) as per ts. (both side extensible), , outdoor type 33 kv sf6 type extensible and motorized 2 way rmu (1lbs+1vcb)

CTN :45511136 Due date: 02 Jul, 202602 Jul, 2026 3.60 Crore
Tender For corrigendum : supply of accessories for cable- (i)piercing connector type-i 16-50, (ii)piercing connector type-ii 16-50, (i)piercing connector type-i for single phase/ three phase (main 70-150 sqmm. tape of 50-95sqmm), (ii)piercing connector type-ii (main 70-150 sqmm tape-of 50-95 sqmm), suspension clamp with attachment, tension clamp with attachment, cable straight-through joint kit suitable for 70 sqmm, cable end termination kit suitable for 70 sqmm, i)t clamp for bus bar for dog to dog conductor, ii)terminal clamp for busbar for panther conductor, bi-metallic clamps for vcb, bi-metallic clamps for transformer, 30v 100ah lead acid battery, battery charger suitable for 30 v 100ah battery, 30v dc lithium-ion battery set, lt robust fuse unit/switch fuse unit, gi pipe 150mm b grade, gi pipe 150mm a grade, heat shrinkable cable jointing kit with lugs for 33/11 kv 3 core (33/11kv, 3*300 sqmm), (i)ht bi-metallic clamps for dtr, (ii)lt bi-metallic clamps for dtr, (i) dc distribution board with mcb, (ii)ac distribution board with mcb, led lamp complete fitting, (i) aluminium lugs 70 sqmm, (ii) aluminium lugs 150 sqmm, (iii) aluminium lugs 300 sqmm, pf unit (kitkat) 200 amp., pf unit (kitkat) 300 amp., hrc fuse base 200/250 amp., hrc fuse base 300 amp., hrc fuse base 400 amp., hrc fuse link 200/250 amp., hrc fuse link 300 amp., hrc fuse link 400 amp, hand operated chain pulley block 3 ton, silica gel breather 500 gm., (i) bi-metallic clamp suitable for 12mm dia lt stud, (ii) bi-metallic clamp suitable for 20mm dia lt stud, (iii) bi-metallic clamp suitable for ht stud, i) i-bolt 20 mm., ii) i-bolt 16 mm., t.c. fuse wire 14,16,18 & 20 swg, ethical & generic medicines and surgical items for dispensary mppkvvcl, ujjain

Central Government And Public Sector

CTN :45433361 Due date: 03 Jul, 202603 Jul, 2026 NA
Tender For corrigendum : supply of alternator brush set make champion , drain valve , header1 pwr flow , nut exhaust , rivet cherry , lever of switch , edge in ft protection rubber feet , camloc receptacle , bonding wire , paddle cable , gasket , stall warning , bolt hexagon , washer , co detector make gaurdion , egt sensor , baffle cylinder 1 da42 , baffle cylinder2da42 , baffle cylinder4 da42 , baffle cylinder3da42 , muffler exhaust , fuel selector shaft , guide bolt , clip locking turn buckle , sensor techomter , fan gdu , fuel hose length inches , butt splice , mod rely box , terminal , nlg damper assy for da42 , shroud liner , switch rocker , fuel probe assy. , me406 elt battery pack kit make artex , spark plug make champion , gdu 1040p1000 d sub connector , bolt hexagon ln903705054 , mlg support plate , rubber 2mm 131zz01020 , spring washer , washer convex , washer concave , nut castle hexagaon , nut castlellated din935m1610zp , cotter pin , screw hexagaon , strut mlg, lh , strut mlg, rh , nut , bolt hexagaon , bushing , straight bushing , flanged bushing , mlg cross joint oversize-1 , mlg cross joint oversize-2 , mlg cross joint oversize-3 , rocker arm assy. , foot step lh , foot step rh , aircraft battery , clamp half

CTN :45692318 Due date: 06 Jul, 202606 Jul, 2026 38.00 Lacs
Tender For supply of cable joint kit suitable for cables up to and including 33 kv (v2) (q3) , cable termination kit suitable for cables up to and including 33 kv (v2) (q3) , pvc insulated copper cable single core and multi core circular sheathed with rigid conductor (v2) isi marked to is 694 (q2) , cable end joint 33 kv ht 33 kv 240 sqmm 3c , cable end joint 33 kv ht 33 kv 150 sqmm 3c , cable jointing kit heat straight through 33 kv ht 150 sqmm 3c , cable end joint kit heat shrinkabe 11 kv ht 240 sqmm 3c , cable end joint kit heat shrinkabe 1100 volts 400 sqmm 3 point 5c , cable end joint kit heat shrinkabe 1100 volts 300 sqmm 3 point5 c , cable end joint kit heat shrinkabe 1100 volts 25 sqmm 3 point5 c , cable end joint kit heat shrinkabe 1100 volts 50 sqmm 3 point5 c , cable end joint kit heat shrinkabe 1100 volts 70 sqmm 3 point5 c , pvc heat shrinkable sleeves 50 sqmm , pvc heat shrinkable sleeves 35 sqmm , pvc heat shrinkable sleeves 25 sqmm , pvc heat shrinkable sleeves 30 sqmm * /bid number : gem/2026/b/7673226 + /dated: 24-06-2026 ' ' / bid document 1 / 56

CTN :45666223 Due date: 03 Jul, 202603 Jul, 2026 NA
Tender For supply of bt 09 of 10w jammer cris , coil 03 uh 10w jammer cris , ra 30h 1317m 10w jammer cris , antenna of 10w jammer cris , controller card of 10w jammer cris , garret dsmd key pad , lm 317 of 40w jammer libra , ra 60h 1317m of 40w jammer libra , driver card of 10w jammer cris , antenna base with connector 10w jammer cris , fan with grill of 10w jammer cris , battery connector both male and female type of 10w jammer cris , bif 07 of 10w jammer cris , power cable connector of 10w jammer cris from driver card to base band card
 Loading, Please wait...

Connect us via What's Up