Latest battery Tenders | Government battery Tenders

CTN :45547752

18 Jun, 2026 NA

Kolkata - West Bengal

Tender For (supply) ni-cd cordless screw driver , 1/4" drive ,as per spec 1)maximum torque in hard settings in nm-24 2)number of torque settings-7 3)maximum torque in soft settings in nm-2 4) variable speed yes no-load speed in rpm(with tolerance of +/- 25 rpm 2000 forward and reverse feature yes adjustable clutch yes handle type straight with pivot head trigger lock yes spindle lock mechanism yes chuck size ininches 1/4" type of battery ni-cd battery voltage in volts 12 battery protection for overload and overheating yes whether screwdriver bit supplied yes no of screwdriver bit supplied 4 hss drill bit supplies yes no of hss drill bit supplied (if not supplied put na 2 magnetic bit holder yes brushless motor yes led light available for working in dark yes soft rubber grip for fatigue free use yes warranty in years 1 carry case supplies yes no of spare batteries supplied 2 charger supplied extra no usb charger available yes, make :makita/bosch/black & decor or similar [ warranty period: 30 months after the date of delivery ] ]

CTN :45567560

03 Jul, 2026 NA

Bangalore - Karnataka

Tender For tender enquiry for providing battery operated e-vehicle services 8-seater (7 passengers+1 driver) at indian institute of science

CTN :45542564

18 Jun, 2026 8.00 Lacs

Udaipur - Rajasthan

Tender For supply of battery (make exide amaron sf sonic and equitant) for different type vehicle at municipal corporation, udaipur. (arc basis) (with all taxes, gst etc.) (e_04 / garage_01_ battery)

CTN :45566822

25 Jun, 2026 NA

Kadi - Gujarat

Tender For supply of online ups (?10 kva) with battery conforming to is 16242 (part 1) (q2)

CTN :45559527

30 Jun, 2026 NA

Gurgaon - Haryana

Tender For supply of supply of indoor wireless ap as per specification , supply of wireless lan controller 5x ge rj45 ports including 4x internal ports 1x wan ports as per specification , supply of layer 2 full poe switch as per specification , supply of fixed dome colour as per specification , supply of fixed bullet colour camera as per specification , supply of up to 08 ch ip video input and up to 12 mp resolution supported 1 sata interfaces up to 10 tb capacity for each disk nvr as per specifications , installation testing commissioning of above equipment s. no 1 to 6 , supply of high speed 10g ethernet u utp 500mhz lszh cable c6a 305 mts box as per specifications , supply of cat 6 24port 1u loaded patch panel as per specifications , supply of cat 6 a i o gang box with dual face plate as per specifications , supply of high speed gigabit 24awg u utp lockable patch cord grey lszh c6a 1m as per specifications , supply of key for lockable patch cord as per specifications , supply of wall mount rack 600x600 front glass door with lock 1x pdu 6 soc 5 15a indian round pin socket 16a mcb as per specifications , supply of 2kva ups with battery with 30 mins battery backup supporting stand for ups as per specifications , miscellaneous items casing capping conduits screw flexible conduit tie etc , installation testing laying fixing commissioning of all passive components as mentioned above s. no. 8-15

CTN :45525479

06 Jul, 2026 11.85 Lacs

Kamrup - Assam

Tender For establishment of material testing laboratory under o/o the agm(c) design and projects aegcl kahilipara - civil works, compression testing machine (2000kn) with digital reading, automatic pace control with all attachment for testing concrete cube & bricks conforming to indian standards (is: 516, is: 14858) and can also be supplied as per british standards (bs: 1881), astm c-39 with calibration certificate. it should be typically calibrated to class 1 accuracy ( 1%); featuring a robust, fully welded loading unit and hardened, ground, and polished platens, often with a self-aligning upper platen; with display type as pc-controlled with software. it should have pace rate of full three-term pid feedback control with fully automated data acquisition, storage, and analysis. the operation should be fully automated, stress & strain controlled loading., aggregate impact test, crushing value apparatus with hammer weight of 13.75 kg 0.25 kg (or 14 kg 0.5 kg), height of free fall of 380 mm 5 mm, impact cup (mould) inner diameter of 102 mm 0.25 mm and impact cup depth of 50 mm 0.25 mm as per is 2386 (part iv), bs 812-112. automation grade often semi-automatic with a digital counter. display type digital for the blow counter; sometimes includes a digital gauge for other measurements. overall weight (approx.) should be of 45 kg to 60 kg (total machine mass). standards compliance conforms to international standards like is: 2386 (part iv), bs 812-112, etc. , sieves: (40, 20, 10, 4.75, 2.36, 1. 18) mm with lid and pan and (0.6, 0.3, 0. 15, 0.075) with lid and pan (all 200mm diameter size) metal : gi, weighing balance-30kg (accuracy-1gm)., weighing balance-5kg (accuracy-0.1gm)., hot air oven with double walled design, thick glass wool insulation to prevent heat loss, micro processor based auto tune pid digital temp controller cum indicators and 230 volt 50hz single phase ac supply, heavy duty stainless steel lock, indoor hinge and sample placement trays, temp range should be 50 degree c 250 degree c with temp accuracy 0.5 degree c. it should have digital led display of size 45 cm x 45 cm x 45 cm (inner)., cube mould (cast iron) of size 150mmx150mmx150mm, isi marked as per is:10086. weight of the mould will be about 13.5 kg, strictly as per bis specifications and within required tolerance., slump cone test apparatus-(isi marked)-with tamping rod (complete set ) as per is: 7320 and is: 1199 part 2, consisting of slump cone, base plate and graduated tamping rod - made of stainless steel., proctor test apparatus with all accessories as per is: 2720 part 8 and is: 10074(1982), complete with base plate and collar., measuring cylinder-borosilicate (1 complete set ) glass of sizes 100 ml, 250 ml, 500 ml and 1000 ml., field density test app-core cutter method ( complete set) complete with core cutter of 100 mm dia x 130 mm long with chromium plating, dolly for 100 mm dia core cutter, and rammer with steel rod as per is : 2720, rebound hammer digital (original/silver schmidt type n) with calibration certificate as per is 516 part 5, sec 4 with impact energy of 2.207 nm (1.63 ft-lbf), concrete strength range of 10 100 mpa (1450 14500 psi) and weight of 570 g (1.3 lb) with display as graphic lcd (e.g., 17x71 pixels) or analog/digital and battery life: >5000 impacts., ultrasonic pulse velocity test apparatus (proceq, acoustic control systems, vedantrik technologies) with calibration certificate and frequency range of 24 500 khz (nominal transducer); measurement resolution of 0.1 s (microseconds); pulse voltage ranging from 125 v to 500 v (adjustable); receiver gain of 1x, 10x, 100x, auto, up to 1000x (lab+ model); pulse shape as square wave; measurement modes as pulse velocity, surface velocity, e-modulus, compressive strength correlation, crack depth; memory which stores >500 measured values; display should be 79x21 mm passive matrix oled; connectivity through usb for pc connection; software: pundit link for analysis and export. standards compliance

CTN :45559728

25 Jun, 2026 45.96 Lacs

Allahabad - Uttar Pradesh

Tender For supply of circular connector , back shell , toggle switch , cat 6 patch , inter connecting , cable sheath , printer , portable battery

CTN :45348781

18 Jun, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : supply of orthopaedic battery operated drill system (v2) (q2) , high frequency image intensifier 9 inch with c-arm, memory and printing facility , electronic tourniquet set single or double , total knee replacement set , total hip replacement set , dhs or dcs instrument set imported- us or german or swiss or u.s. make , mini fragment basic instrument set imported , sholder arthroscopy instrument set with ortho pump and radio ablater , radio frequency ablator , micro discectomy set imp. , dcp set

CTN :45538322

03 Jul, 2026 NA

Raigarh - Chhattisgarh

Tender For supply of anaesthesia machine (v2) (q2) , electrocautery machine (v2) (q2) , syringe infusion pump (q2) , specular microscope , research microscope with hd projector system , cabinet for slide h and v 10000 capacity , hydrolic delivery bed , battery operated drill , rigid esophagoscopy set with forceps and suction , nasogastric feeding pump , gyn examination table , lead barrier triple panel , x-ray dr panel , difficult airway clearance management system , micro wave for instrument sterlization , light microscope bionocular led microscope , dental chair , transcutaneous bilirubinometer , ot table , ot portable light , centrifuge machine , infusion pump , automatic tourniquet system , etc02 monitor with spo2 , ophthalmic surgical operating microscope , usg with high frequency * /bid number : gem/2026/b/7627243 + /dated: 12-06-2026 ' ' / bid document 1 / 30

CTN :45423383

18 Jun, 2026 NA

Chandigarh - Chandigarh

Tender For corrigendum : supply of online ups (?10 kva) with battery conforming to is 16242 (part 1) (q2)

Battery Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors