Latest bdv test kit Tenders | Government bdv test kit Tenders

Central Government/Public Sector

CTN :45339278

10 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply, installation, testing and commissioning of rain water testing system at els/cnb as per attached specification and also conforming to rdso smi no. rdso/2017/el/smi/0315(rev.0) dt. 03.10.2017 or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45337687

25 Jun, 2026 NA

Jodhpur - Rajasthan

Tender For supply of polytetra methylene terephthalate material (ptmt) s.s.304 grade spring loaded gravity cock 15 mm female thread with following specifications: water pressure up to 5kg/cm2, dimension of lift cock is length-82 mm, width 42 mm. colour- gray. manufacturer shall be submitting material test and water pressure testing valid certificate by tpi/nabl certified lab. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] ]

Central Government/Public Sector

CTN :45077142

28 May, 2026 NA

Dhanbad - Jharkhand

Tender For corrigendum : supply of transformer oil bdv test kit (q3)

Central Government/Public Sector

CTN :45306043

13 Jun, 2026 40.00 Lacs

Jammu - Jammu And Kashmir

Tender For maintenance of day to day complaints of water supply including connected items at various loc under ge nagrota - m&l for repair/rectification of leakage to water supply distribution lines 15 mm dia to 25 mm dia gi tubing by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket etc, threading if required including replacement of gi union/socket/nipple as required complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 40 mm dia to 50 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 80 mm to 150 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing /di /ci /ms of 150 mm dia to 300 mm dia complete all as specified and directed. note : (i) the complaints for the above works shall be registered by contractor at the water supply complaint cell of age e/m (ii) stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(iii) tools ,plumber with helper and transport with driver for attending of above complaints shall be arranged by contractor. (iv) the rate quoted by the contractor for above jobs under item no 1 to 4 shall be inclusive of cost of works under note (i) to (iii) above. (v) the said complaints shall be rectified within 12 hrs of the registration of the complaints failing which recovery of rs.500/commplaint shall be made for contractors due payment (vi) the stores/item required for the works under item no 1to 4 shall be measured separately under relevant item as supply only. (vii) excavation, returning/ filling shall be measured and paid for separately and material required for the works above shall be included to quoted rates., excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep including getting out in hard/dense soil complete all as specified and directed., returning /filling including watering , leveling , spreading and well ramming in layers not exceeding 25cm thick complete all as specified and directed., removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 50 metre above the starting point complete all as specified and directed., refixing/relaying of old retrieved steel tubing in new or old position with and including new gi fittings (connections) and as per site requiremen laid in trenches, above ground level or in any position of following sizes as under complete all as specified and directed : -, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, taking down unserviceable gi tubing / upvc tubing from any position complete with all fittings & connections from any position of following sizes as under complete all as specified and directed :-, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and fixing/laying & testing of galvanised steel water tubing, medium grade, isi marked complete with all new galvanized fittings of following sizes laid in trenches/ above ground level or in any position complete all as specified and directed :, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and laying upvc pipe tubings medium grade pressure rating 10 kgf/cm2 isi mark with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches or in any other position of following sizes as under complete all as specified and directed , 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply only gi fittings, medium grade, isi marked of following sizes as under complete all as specified and directed :-, union 15 mm dia, union 20mm dia, union 25mm dia, union 32mm dia, union 40mm dia, union 50mm dia, socket 15 mm dia, socket 20 mm dia, socket 25 mm dia, socket 40 mm dia, socket 50 mm dia, reducer socket 40mmx50mm, reducer socket 15mmx20mm, reducer socket 20mmx25mm, elbow 15mm dia, elbow 20mm dia, elbow 25mm

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

Central Government/Public Sector

CTN :45282510

15 Jun, 2026 NA

Bengaluru - Karnataka

Tender For supply, installation,testing and commissioning of 24 vdc twin beam led headlight as per rdso specification no. rdso/2017/el/spec/0134 (rev.04). on various types of track machines. rdso specification no.rdso/2017/el/spec/0134(rev.04) detailed as below:- (1).operating voltage should be nominal 24vdc ,minimum voltage 22vdc and maximum working voltage 30 vdc (2).power consumption should not be more than 100 watts at nominal operating voltage (3).the led unit should have built-in reverse polarity protection.the reverse polarity test shall be conducted at a nominal voltage (24vdc) for 1 minute (4). bright mode ( at distance of 8 mtr)=7000 lux minimum and 9000 lux ( max) . dim mode(at a distance of 8mtr)900lux(min) and 1200lux (max) .(5)led headlight unit shall have ip-66 protection against water and dust. manufacturer should provide certificate for same from any nabl/govt approved lab.(6) dye penetration test for detection of surface defects/cracks on cracks shall be conducted as per is:3658-1981.(7) angle of the beam should be as per clause 12.6.5 of specification rdso/2017/el/spec/0134 (rev.04) (8). headlight be so designed that the failure on one led should not lead to failure of other led (9) led used should be of smd/cob type only.colour temperature of white coloour led shall be 3700k-5000k(white). colour rendering indexshould be greater than or equal to 80 (10) illumination intensity measurement shall not be less than 4.8 lux in bright mode at a distance of 305 metre (11) all kinds of tests as recommended in above mentioned specification to be carried out.accepted make/brand:rdso approved sources [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45203461

04 Jun, 2026 10.00 Lacs

Bhopal - Madhya Pradesh

Tender For supply of elctric item coolar repair and others items - supply of electric item, supply coolar, and plumbering item, repairing work and other item, desert cooler (iron body) complete 90 100 liters, desert cooler (fiber body) complete 90 100 liters, desert cooler (iron body) complete, 70 80 liters, desert cooler (fiber body) complete, 70 80 liters, room cooler (iron body) complete, 40 50 liters, room cooler (fiber body) complete, 40 50 liters, cooler motor (copper winding), all capacity, cooler pump, all capacity, cooling pad (wood wool / honeycomb), fan blade / cooler fan, air deflector / front grill (jali), motor stand / clamp, bearing (motor/fan), capacitor, belt (if applicable), water tank repair / replacement, float valve, drain plug, overflow pipe, water distribution pipe system, switch board with regulator, electric wiring work, mcb / fuse protection, earthing wire, 3 pin plug top, wheel / stand, iron body repair (welding, painting), fiber body repair (crack fixing), installation charges (new cooler), transportation charges, complete servicing (cleaning, repair, testing & commissioning), old cooler repair (complete overhauling) per unit, disposal of scrap / old parts, warranty on parts & service minimum 1 year, new cooler technical specification (air delivery, power, copper motor), rate inclusive of all taxes, ceiling fan new, 48 inch / 1200 mm, wall fan new, 16 inch / 400 mm, ceiling fan motor, wall fan motor, fan blade (ceiling/wall), capacitor (fan), fan regulator, oscillation mechanism (wall fan), fan guard / grill (wall fan), down rod (ceiling fan), shackle / clamp kit (ceiling fan), fan wiring & installation, fan repairing / servicing (complete), bearing replacement (fan), fan cleaning & overhauling, pvc pipe 1 inch, pvc pipe 1.5 inch, pvc pipe 2 inch, pvc pipe 3 inch, pvc pipe 4 inch, pvc elbow 1 inch, pvc elbow 1.5 inch, pvc elbow 2 inch, pvc elbow 3 inch, pvc elbow 4 inch, pvc tee 1 inch, pvc tee 1.5 inch, pvc tee 2 inch, pvc tee 3 inch, pvc tee 4 inch, pvc socket 1 inch, pvc socket 1.5 inch, pvc socket 2 inch, pvc socket 3 inch, pvc socket 4 inch, pvc reducer 1x inch, pvc reducer 2x1.5 inch, pvc bend 2 inch, pvc bend 3 inch, pvc bend 4 inch, pvc door tee 2 inch, pvc door tee 3 inch, pvc door tee 4 inch, pvc p trap 1.5 inch, pvc p trap 2 inch, pvc floor trap 4x4 inch, pvc floor trap 5x5 inch, pvc nahani trap standard size, pvc end cap 1 inch, pvc end cap 2 inch, pvc end cap 3 inch, pvc end cap 4 inch, pvc pipe clamp all sizes, pvc solvent cement 100ml, pvc solvent cement 250ml, cpvc pipe inch, cpvc pipe inch, cpvc pipe 1 inch, cpvc elbow inch, cpvc elbow inch, cpvc elbow 1 inch, cpvc tee inch, cpvc tee inch, cpvc tee 1 inch, cpvc socket inch, cpvc socket inch, cpvc socket 1 inch, cpvc union inch, cpvc union inch, cpvc union 1 inch, cpvc female adapter inch, cpvc female adapter inch, cpvc male adapter inch, cpvc male adapter inch, cpvc brass elbow inch, cpvc brass tee inch, cpvc ball valve inch, cpvc ball valve inch, cpvc ball valve 1 inch, cpvc tank nipple inch, cpvc tank nipple inch, cpvc tank nipple 1 inch, cpvc pipe clamp all sizes, cpvc solvent cement standard, bib cock tap inch, pillar cock tap inch, angle valve inch, concealed stop cock inch, sink cock standard size, swan neck tap standard size, ptmt tap inch, brass tap inch, shower set standard size, health faucet standard size, jet spray set standard size, connection pipe 18 inch, connection pipe 24 inch, connection pipe 36 inch, waste coupling standard size, bottle trap 1.25 inch, flush valve standard size, western commode standard size, indian toilet seat standard size, wash basin standard size, urinal standard size, cistern tank 5 liter, cistern tank 10 liter, pvc flush pipe standard size, seat cover standard size, basin waste pipe 1.25 inch, mirror standard size, soap dish standard size, towel rod standard size, water tank 500 liter, water tank 1000 liter, water tank 2000 liter, ball valve inch, ball valve inch, ball valve 1 inch, tan

CTN :45297170

01 Jun, 2026 35.0 Thousand

Deodar - Gujarat

Tender For supply of transformer oil bdv test kit (q3)

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

State Government

CTN :45297393

12 Jun, 2026 20.00 Lacs

Delhi - Delhi

Tender For supply of transformer oil bdv test kit (q3)

Bdv Test Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors