Latest beams Tenders | Government beams Tenders

Central Government And Public Sector

CTN :43030652

05 Jan, 2026 5.00 Lacs

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : supply of scrapping of damaged columns beams and walls , applying of zinc oxide to the damaged columns beams and walls , repair and plastering of columns beams and walls , applying of smooth putty and primer , painting of emulsion paint as per the approved colours

Central Government/Public Sector

CTN :43035511

26 Dec, 2025 NA

Noida - Uttar Pradesh

Tender For corrigendum : fabrication supply of factory finished fabricated structure of power house, and common control room ,columns, bracings, wall beams, floor beams, with supply of raw material based etc at unit1 at 1x800 mw dcrtpp yamuna nagar. haryana

corporations/Associations/Others

CTN :43279040

03 Jan, 2026 2.32 Lacs

Kolkata - West Bengal

Tender For restoration of dilapidated wall, window supporting structures with its allied cracked columns, beams etc at the adjoining side of h.t pump unit no- 1 to 3 at the pump house of rsm sq. bps

CTN :42964036

22 Dec, 2025 NA

Senapati - Manipur

Tender For bid to ras supply of paint , 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers , synthetic rubber adhesive in 1 ltr container , corner glass self 200mm make jaquar oblique cera , thread roll , plastic rawal plug 40mm long , bracket for whb , extention nipples 15mm x 50mm , hex nipple cp 15mm x 50mm , hydraulic door closer , door stopper , sliding door bolt aluminium 200mm , suspenders for for e-board ceiling , clips holder for e-board ceiling , e-board false ceiling size 60cmx60cmx4mm , glass panes 3mm , half threaded screw 35mm , full threaded screw 25mm , low plug 35mm , half threaded screw 25mm , door handle 150mm , sand coarse locally available best quality , fine aggregate sand for concrete , 20mm thick 2nd class hard wood planks clean swan 25cm wide and 2. 40 to 3. 00 mtr long , ditto but with waste hole of ptmt minimum weight 100 gms , wire nails of any size , aluminium extruded handle 100mm size , aluminium extruded barrel tower bolt 150mm , aluminium sliding door bolt 300mm long , glue for lime , 12mm thick particle board , sheet assembly consisting of 5. 5mm thick sheet glass shelf 12cm wide with chromium plated bracket and railing 60mm long , varnish finishing interior or exterior , french polish , distemper , 18mm pre laminated particle board, grade 2 quality, interior grade, commercial type , exterior emulsion paint weather proof of 1st quality isi marked of the following make asian oblique apex ultima oblique berger oblique indigo , painting brush 10cm flat size , painting brush 7. 5cm flat size , painting brush 2. 5cm flat size , lime unslaked best quality fat lime , wooden screw 25mm to 40mm long size as reqd 100 nos per pkt , wooden screw 15mm to 20mm long size as reqd 100 nos per pkt , m seal 500 gm pack , writing brush flat size no 1 , writing brush flat size no 2 , writing brush flat size no 3 , writing brush flat size no 4 , pvc bracket plain for 20mm dia rod , pvc bracket angle for 20mm dia rod , fancy bracket plain for 25mm dia rod , fancy bracket angle for 25mm dia rod , centre support for 25mm dia rod , lime colour blue in 100 ml packet , ms window peg stays long , rubber cill door bottom , stell peg set of six , indigo platinum series fllow coat emulsion paint of isi marked of colour rred oblique grey oblique white oblique yellow etc. make ndigo oblique asian oblique berger oblique granostone , water proof designer wall oblique floor laminates self adhesive of size 0. 8mm to 1mm thick of glossy, matte, texture finish of colour red, white and plain isi marked , sand paper , scrapper , roller for paint , ppgi roof sheet corrugated , plain sheet , self tapping screws , wooden beading , spindle no 3 , spindle no 2 , hasp and staple , wooden battens n. exc 3 sqm , pvc lipping , f oblique cistern washer , f oblique cistern handle , bib cock washer all types , veneer board 8 feet x4 feet x1mm , wall rounted rectanglur glass sholves , 20mm nominal graded crushed stone aggregatemirror loking 24"x18" with pvc frame , pvc bathroom cabinet mirror size 450x350mm, wash hand basin 500x400mm, ewc white colour , wash hand basin 450 x 350mm, pvc wall laminates, water tank 500 ltr, water tank 1000 ltr, cascade type ewc model-sf 9640 rimless, size 360x725x735mm, felt roof bituminius (pbs roll), extra patch, helical door closer, common burnt clay building bricks class b (size 230 x 115x 75mm), 2nd class h/w clean swan scantling in section exc 40 sqcm in section. , mdf board 20mm thick, gi tubing 15mm medium grade, wc european 's' type, cabinet mirror 450x300x125mm , lid for //bid details2 / 95

State Government

CTN :43204727

22 Dec, 2025 10.00 Lacs

Paonta Sahib - Himachal Pradesh

Tender For construction of rcc over head storage tank of 80000 ltrs capacity i/c dismentling of rcc beams, chajja ms tank and reconstruction of rcc beam and chajja to support the rcc tank

CTN :43225953

07 Jan, 2026 5.00 Lacs

Panaji - Goa

Tender For supply installation and commissioning of lab. equipment for civil engg dept - digital compression testing machine with capacity of 3000kn (300 tons) with flexural attachment of 100kn capacity including accessories and toolkitspecification:-1. machine capacity required : - digital compression testing machine with capacity of 3000kn (300 tons) with flexural attachment of 100kn capacity. digital compression testing machine shall confirm is 516 and is 14858. digital compression testing machine for testing concrete cubes of size 100mm, 150mm, 200mm ,300mm and concrete cylinder specimen up to 300mm diameter and 300mm height . also the cement mortar cubes of 70.7 mm size and 50mm size. 2. loading frame:- steel welded loading frame with top cross head base and solid side walls. hydraulic piston is fixed to the base and platens are hardened, ground and polished. the upper and lower plate should be marked with the guidelines on the lower plate to keep the specimen co-axially with hydraulic jack. the machine should be provided with suitable side spacers as standard to accommodate the variety of sizes of specimens as indicated above. the two speed pump to allow fast approach of platens for daylight closure and also to allow precise control over load application using control lever and valves.3. digital display:- display shall show force and stress values in si units. the electronic control unit shall be based on suitable processor with a built in interface for laptop and computers. the processor speed shall be such that the online load deformation curve on full screen is smooth.4. the storage capacity to record and store 2000 complete test results with the facility of printing results/logged data through built in parallel port. least count of 0.1 kn.5. automatic controls for switch off on overload or over travel or specimen break or manual termination.6. power supply :- suitable for operation on 220v/230v single phase 50hz ac supply 7. additional requirements maximum clearance between plate 400mm. maximum distance between side platen 400 mm platen size 320mm square.8. flexure attachment:- flexure testing machine of 10 tons ( 100kn) capacity confirming to is 516. loading to be applied by the downward movement of piston. machine shall be suitable to test beams of 100x100x500 mm and 150x150x700mm.machine shall be supplied with suitable standard spacers for testing different sizes of beams.9. additional requirement for flexural test: three point loading light weight rugged high strength frame.least count 0.1 kndistance between supporting rollers: - 600mm for 150x150 x700 mm beam and 400mm for 100x100x500 mm beamdistance between loading rollers 200mm for 150x150x700mm beam 133 mm for 100 x 100 x500 mm beam power supply suitable for operation 220v 50hz single phase.10. the machine should be supplied with accurate toolkit11. compatible software should be included

State Government

CTN :42957007

02 Jan, 2026 10.96 Lacs

Multi City - Telangana

Tender For corrigendum : construction of two room building with rcc roof slab columns and beams for bachannapet section office in jangaon division of jangaon circle sc reserved

State Government

CTN :43182787

22 Dec, 2025 34.03 Lacs

Pondicherry - Pondicherry

Tender For cement concrete road restoration at jeevanatham nagar and v.o.c. streets including cement concrete patch works at various places of part iv of sudhana nagar oht command area, puducherry

Central Government/Public Sector

CTN :43190990

26 Dec, 2025 NA

Bilaspur - Chhattisgarh

Tender For fabrication and supply of factory finished fabricated structure of power house structure (columns, bracings, wall beams, floor beams, trusses etc.) up to project site, with supply of raw material for sipat

Central Government/Public Sector

CTN :43217931

26 Jan, 2026 19.90 Crore

Cuddapah - Andhra Pradesh

Tender For tender for supply of deisgn engineering and supply of electrical instrumentation and civil works : : - design and engineering of imcc panel 2 nos and vfds , design and engineering of apfc and hvac , design and engineering of apfc and field instruments , design and engineering of cables and termination , design and engineering of earthing of imcc , field equipments and soil testing , design and engineering of civil buildings and structure foundations , design and engineering of imcc building with earthing system , design and engineering of structural works for cable laying for both incoming and outgoing cables , design and engineering of lighting system of imcc building , equipment locations at ccr ground floor and along the structural path for cable route , supply of imcc panels , vfd panels , supply of apfc panels , hvac system , supply of mldb lighting distribution boards , lighting material including db , light fittings , and all related accessories or wiring material etc , supply of field instruments and necessary piping materials as required , supply of plc , supply lt cables and other related accessories for electrical , termination material and other instrumentation cables as required , supply of cable trays for electrical and instrumentation , supply of all earthing material as per is 3043 for imcc and connection to earth pits for motors , panels etc , supply of fire detection and alarm system for building and cable alley area along with integration and display at fire station/existing control centre , erection , testing , commissioning , and handover of equipments of imcc panels and vfd panels , erection , testing , commissioning , and handover of equipments of apfc panels and hvac system , erection , testing , commissioning , and handover of equipments of lighting system as per above supply , erection , testing , commissioning of earthing system , erection , testing , commissioning of field instruments and necessary piping materials etc as required , erection , testing , commissioning and handover of plc , erection , laying , testing and commissioning of lt cables ( cable terminations wherever required along with necessary accessories is in the scope of the contractor) for electrical and instrumentation , erection , testing and commissioning of cable trays for electrical and instrumentation , erection , testing and commissioning of fire detection and alarm system for building and cable alley area along with integration and display at fire station/existing control centre , substructure excavation , foundation works (footings , columns up to plinth level) , dpc (damp proof course) , and backfilling. , superstructure columns , beams , slabs , brickwork/masonry for all floors above plinth level , and formwork up to ground floor , finishes plastering , flooring (tiles , marble) , painting , wall cladding , and other interior/exterior finishes , plumbing works , fixing of doors up to ground floor. , superstructure columns , beams , slabs , brickwork or masonry for all floors above plinth level , and formwork for subsequent floors as per approved design , finishes plastering , flooring (tiles , marble) , painting , wall cladding , and other interior/exterior finishes , plumbing works , fixing of doors for subsequent floors as per approved design , supply and erection of structural works for cable laying for both incoming and outgoing cables

Beams Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors