Latest bearing bolt Tenders | Government bearing bolt Tenders

CTN :44771259

06 May, 2026 48.0 Thousand

Multi City - Telangana

Tender For corrigendum : procurement of 36mm x 1000mm resin capsule(cable bolt) for grouting 6.1m cable bolts in cmp3 at vkp mine,rg2

CTN :45058092

11 May, 2026 5.55 Lacs

Imphal - Manipur

Tender For supply of 814 stone crusher akona maint demad d d - aj cw1 510 02 044 jaw plate fixed 10 teeth , aj as 1510 03 050 spring plate , aj as 1510 03 051 coil spring , aj as 1510 03 053 toggle plate , aj as 1510 03 056 swing jaw plate 11 teeth , aj as 1510 03 063 toggle bearing , aj rs 1510 04 070 pedestal brg screen ucp 212 , aj rs 1510 04 073 drive v belt c 150 , aj rs 1510 04 074 fly wheel pully , aj rs 1510 04 075 screen pinion 12 teeth , aj rs 1510 04 076 pinion shaft , aj rs 1510 04 079 pedestal brg drive gear ucp 209 , aj ed 1510 05 080 drive v belt c 215 , aj ed 1510 05 086 engine pully , aj ed 1510 05 089 clutch shaft , aj ed 1510 05 092 bearing outer clutch shaft 63102rsr l140 , aj ed 1510 05 093 bearing inner clutch shaft 6204 , aj ed 1510 05 129 pressure plate , aj ed 1510 05 130 clutch plate , aj ed 1510 05 132 oil seal 60 x 110 x 13 , aj mf 1510 07 110 bracket cover bolt with nut m16x50 , aj mf 1510 07 112 toggle block bolt with nut m24x300 , aj mf 1510 07 113 veg block bolt with nut m40x550 , aj mf 1510 07 115 swing jaw plate bolt with nut m20x460 , aj mf 1510 07 127 screen bearing bolt with nut m16x60 , nk jaw plate fixed 13 teeth , nk jaw plate moveable 12 teeth ) /bid number : gem/2026/b/7477539 * /dated: 30-04-2026 & & / bid document 1 / 23

Central Government / Public Sector

CTN :45056738

22 May, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of bearing bolt (single piece design) to schaku drawing no. 40 -586.07.03(3), alteration - 01 or similar, drg no : schaku drawing no. 40 -586.07.03(3), alteration - 01 or similar,type drg: schaku or similar. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44969111

20 May, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of bearing bolt (sub assly.) for bearing bracket of schaku coupler as per escort drg. no.- 40.586.07.03 (3), alt.-1 or wsf drg.no.- 40.586.07.03 (3) as per rdso specn. no.- 61-b-36/rev.68-1 (rev.-2 of february-2025). [ warranty period: 36 months after the date of delivery ]

Central Government/Public Sector

CTN :44980760

01 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of set of gauges for schaku coupler with calibration certificate (traceable to nabl certified lab)& traceability certificate as per list below- 1.profile gauge for upper & lower cup sleeve(2ed-181-1149(schaku 40.586.06.01 (4)& 2ed-18101153(schaku(40.624.06-4(3),drg no.-se-g-121 -02 nos. 2. gauge for pin (31.8c11), drg. no.-se-g-120 -02 nos. 3. gauge for allen bolt/screw (2ed-181-1166), drg.no.-se-g-128-02 nos. 4. gauge for fork head 2ed-181-1204(schakudrgno.40-1000.10-6(3), drg. no. - se-g-132-02 no?s 5. gauge for front plate sub assy.2ed-181-1156 (schaku drg.40...586.06.02 (4), drg.no.-se-g-122-02 nos. 6. profile gauge for adjustable cup sleeve/pair of cup sleeve 2ed-181-1074(schaku drg.40.317.13-1 (3), drg. no.se-g-129 -02 nos. 7. gauge for bush upper & lower 2ed-181-1091(schaku drg.40-524.07-3(4) &2ed -181 1089(schaku drg.40-524.-7-4(4), drg.no.-se-g-118 -02 nos. 8. limit gauge for yoke (sub.assy.)2ed-1811183(schaku gr.40.586.06.04 (2), drg. no.-se-g-124 -02nos. 9. snap gauge for bolt 2ed-181-1181(schaku drg.40.586.06.3 (4), drg.no.se- g-126-02nos. 10. snap gauge for bearing bolt 2ed-181-1093(schaku drg.40.586.07.03 (3), drg. no.se-g-119-02 n o s. 11. limit gauge for carrier (sub assy.)& leaf spring compl.sub assy.2ed-181-1200 (schaku drg.40-524.07.03(4) & 2ed-181-1106(schaku drg.40.524.07.08 (20), drg.no.se-g-117-02 no?s 12. limit gauge for rear plate sub assembly 2ed-181-1157(schaku drg.40.586 .06.03 (4) drg.no.se-g-123-02 nos. 13. gauge for articulation bearing 2ed-181-1151(schaku drg.40.sk.1960 (3) drg. no.s-g-127 -02 nos. 14. go gauge for draft gear/draw &buff gear (sub assy.)drg.no.se-g-136-02 no?s qty-02 sets (set of 14 gauges). note: 1) gauge will be made of hard alloy steel. 2) tip or face of gauging profile should be hardened & tempered. 3) supplier should provide manufacturers certificate. 4) material to be supplied in well packed carrying case. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44948742

11 May, 2026 NA

Kanpur - Uttar Pradesh

Tender For tender for supply of machining of components as per hal supplied drawings - liner , bearing bolt , turned part , washer for rivet assy. , flange , turned part , flange , tube , turned part , tube , turned part , turn part , flange , flange , rep. bush , bush , bearing flange , turned part , bolt , insert part , grip , rotating part , rod , ball , bolt , collar stud , bolt , washer for rivet assy. , turned part

CTN :44952907

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.ws/s-yd/10/04/26-27/bg/cond./8w/emu motor coach and trailer coach description- iron and steel scrap cutup parts of bg cond./8w/emu motor coaches and trailer coach with or without n.f attachment, without contents if any. 1) se 10633 emu-mc 2) se 10632 emu-mc 3) se 10635 emu-mc 4) se 10636/108636 emu-mc 5) se 10954/108954 emu- tc 6) se 10950/108950 emu-tc nb: [1] (a) 04 emu motor coaches are to be sold without : i) buffers. ii) screw coupling. iii) bearing bolt. iv) draw and buff gear. v) draw hook with collar. vi) semi permanent coupler end -a. vii)semi permanent coupler end -b. viii) draw and buffer gear. ix) centre pivit pin top bush. x) centre pivot pin bottom bush. xi) wearing piece. xii) compensating ring. xiii) wheel sets 16 nos. xiv) oil pump motor. xv) radiator motor. xvi) rectifier cooling motor. xvii) transformer. xviii) choke tank (sl, tl & dl). xix) traction motor complete with pinion. xx) suspension brass bearing. xxi) auxilary compressor. xxii) battery charger. (b) 08 nos.bogie frames(trolley) are to be sold with fittings without primary suspension against srl no.01 to 04 . nb:[2]: emu trailer coaches are to be sold without 08 nos wheel sets along with roller bearing against srl no 05 and 06 and 04 nos bogie frame with complete fittings against srl 05 and 06 and other excluded fitting list as per latest excluded fittings /coach 1271 dated 13.09.2018. nb: [3] special condition for rolling stock- a) all excluded materials including wheel sets and bogie's fittings are to be handed over by the purchaser at the nominated location for which they have to arrange labour /tools/ equipment for loading of the excluded items from cutting site and then transport to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28 trolley, coil spring, screw coupling, buffer sets etc. (ii) sse-19 wheel sets (iii) sse-30 ep unit (iv) sse-53 & 56 other emu items to be hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 parcent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 parcent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser has cleared all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:[4] 24 nos. wheel sets with complete fittings and with excluded fitting (released item) and 04 nos.bogie frame with complete fittings are to be handed over by the purchaser to concerned location as advised by concerned sse. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys. [custodian/stock holder - sse-emu-56 for motor coaches and sse-carraige-kgpw for tc coaches]

CTN :44948023

13 May, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of bearing bolt drg. no.40-586-07-03(3) or equivalent as per rdso specification no. -61-b-36/(rev-02) of february-2025. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44773773

07 May, 2026 NA

Avadi - Tamil Nadu

Tender For supply of bearing bolt for semi permanent coupler to rdso specn. no. 61-b-36/ rev.02, feb-2025 and to escorts drg no. sk.341, ref no. 40.586.07-03 (3) or to wsf drg.no.40-586-07-03 (3) or to sanrok drg.no.2ed-181-1093 or equivalent rdso approved make. [ warrantyperiod: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44690060

16 Apr, 2026 NA

Hubli - Karnataka

Tender For supply of bearing bolt for coupler to schaku drg. no . 40-586-07-03-(3) and confirming to rdso specification no.61-b-36, rev-02. material to be procured from rdso approved sources. [ warranty period: 36 months after the date of delivery ]

Bearing Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector