Latest bearing cartridge Tenders | Government bearing cartridge Tenders

Central Government/Public Sector

CTN :45030365

29 May, 2026 NA

Cuddapah - Andhra Pradesh

Tender For supply of bonfigloli gear box spares on annual rate contract basis - model-1:model: as55 df p112, code: 1900000950717270002, batch:6/19, v1, i:33:2, application : i) neutralization tank agitator ii) precipitation tanks in chemical house iii) causticization tanks, casing with flange (part no. 2) for model-1, cover (part no. 3) for model-1, internal support (part no. 4) for model-1, gasket (part no. 5) for model-1, gasket (part no. 6) for model-1, extended 1st reduced pinion (part no. 7) for model-1, bored 1st reduced pinion (part no. 8) for model-1, gear wheel 1st reduction (part no. 9) for model-1, gear wheel 2nd reduction (part no. 10) for model-1, pinion 3rd reduction (part no. 11) for model-1, gear wheel (part no. 12) for model-1, cap (part no. 13) for model-1, bored input shaft (part no. 14) for model-1, oil seal (part no. 15) for model-1, oil seal (part no. 16) for model-1, gear head / box, in put assembly, out put assembly, bearing (part no. 20) for model-1, bearing (part no. 21) for model-1, bearing (part no. 22) for model-1, bearing (part no. 23) for model-1, bearing (part no. 24) for model-1, key (part no. 25) for model-1, key (part no. 26) for model-1, key (part no. 27) for model-1, key (part no. 28) for model-1, key (part no. 29) for model-1, level plug (part no. 30) for model-1, drain plug (part no. 31) for model-1, breather plug (part no. 32) for model-1, parallel pin (part no. 33) for model-1, parallel pin (part no. 34) for model-1, hex head screw (part no. 35) for model-1, hex head screw (part no. 36) for model-1, hex head screw (part no. 37) for model-1, circlip (part no. 38) for model-1, circlip (part no. 41) for model-1, circlip (part no. 42) for model-1, 2 nd reduction pinioin (part no. 45) for model-1, out put shaft (part no. 47) for model-1, spacer ring (part no. 48) for model-1, circlip (part no. 58) for model-1, circlip (part no. 39) for model-1, extended input shaft (part no. 50) for model-1, key (part no. 51) for model-1, input assembly, output assembly, model-2:as60 df p112, code: i 11799930001,batch:4/10, v1, i:37:1, application : feed tank agitator - ssr, casing with flange (part no. 2) for model-2, cover (part no. 3) for model-2, internal support (part no. 4) for model-2, gasket (part no. 5) for model-2, gasket (part no. 6) for model-2, extended 1st reduced pinion (part no. 7) for model-2, bored 1st reduced pinion (part no. 8) for model-2, gear wheel 1st reduction (part no. 9) for model-2, gear wheel 2nd reduction (part no. 10) for model-2, pinion 3rd reduction (part no. 11) for model-2, gear wheel (part no. 12) for model-2, cap (part no. 13) for model-2, bored input shaft (part no. 14) for model-2, oil seal (part no. 15) for model-2, oil seal (part no. 16) for model-2, gear head / box, in put assembly, out put assembly, bearing (part no. 20) for model-2, bearing (part no. 21) for model-2, bearing (part no. 22) for model-2, bearing (part no. 23) for model-2, bearing (part no. 24) for model-2, key (part no. 25) for model-2, key (part no. 26) for model-2, key (part no. 27) for model-2, key (part no. 28) for model-2, key (part no. 29) for model-2, level plug (part no. 30) for model-2, drain plug (part no. 31) for model-2, breather plug (part no. 32) for model-2, parallel pin (part no. 33) for model-2, parallel pin (part no. 34) for model-2, hex head screw (part no. 35) for model-2, hex head screw (part no. 36) for model-2, hex head screw (part no. 37) for model-2, circlip (part no. 38) for model-2, circlip (part no. 41) for model-2, circlip (part no. 42) for model-2, 2 nd reduction pinioin (part no. 45) for model-2, circlip (part no. 58) for model-2, circlip (part no. 39) for model-2, extended input shaft (part no. 50) for model-2, key (part no. 51) for model-2, spacer ring (part no. 46) for model-2, out put shaft (part no. 49) for model-2, circlip (part no. 57) for model-2, input assembly, output assembly, model-3:as60 df p132, code:i11800030001, batch:4/10, v1, i:33:4,application : i) filtrate tank

Central Government/Public Sector

CTN :43125446

27 May, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For bid to ras corrigendum : supply of bearings -single row deep groove ball bearing 6212 , srdg ball brg 6204z , srdg ball brg 6206 z , srdg ball brg 6005zz , srdg ball brg 6008 2z , srdg ball bearing 6213zz , support rollers natr 20 , plummer block ucp 206 , pillow block p 208 , thrust ball bearing 51307 , cyl roller brg nu213 , cyl roller brg nj305 , cyl roller brg nn3018k , cyl roller brg n 310 , double row cyl roller brg nn3010 k p4 , double row cyl roller brg nn3012 k p4 , angular contact ball brg 7206 , angular contact ball brg 7207 , angular con ball brg 7209 , srac ball brg 7213 , sph roller brg 22208 , sph roller brg 22210 e , sph roller brg 22212 e , sph roller bearing 22216 , sph roller brg 22214 e , sph roller brg 22216 e , sph roller brg 22310 , sph roller brg 22322 e , lock nut km l 0 with lock washer , lock nut km l 2 with lock washer , srdg ball brg 6007z , srdg ball brg 6005 , srdg ball brg 6013 , single row deep groove ball bearing 6201 , srdg ball brg 6313 , srdg ball bearing 6307 z byc3 , srdg ball brg 6311z , srdg ball brg 6214 2z , srdg ball bearing 6305zz , srdg ball bearing 6006 nr , srdg ball brg 6010 , srdg ball brg 6207 , srdg ball brg 6307 , srdg ball brg 6218z , srdg ball brg 6308z , srdg ball bearing 6201 2z , srdg ball brg 6212zz , srac ball brg 7201b , srac ball brg 7205 bep , srac ball brg7009 , srac ball brg 7012 , srac ball brg 7013 , srac ball brg 7017 , srac ball brg 7208 , srac ball brg 7210 , srac ball brg 7317 , srac ball brg 5202 , sa ball brg 1201 , sa ball brg 1204 , sa ball brg 1205 , sa ball brg 1206 , sa ball brg 1209 , sa ball brg 1211 , sa ball brg 1303 , sa ball brg 1307 , sa ball brg 2208 , sa ball brg 2209 , sa ball brg 2216 , sa ball brg 2304 , sa ball brg 2306 , sa ball brg 2307 , sa ball brg 1309 , drac ball brg 3210 atn9 , angular contact ball brg 7016 e , cyl roller brg nu214 , cyl roller brg nu2206 , cyl roller brg nj205 , cyl roller brg nu244 , cylindrical roller bearing n 211 , cyl roller brg nj2213 , needle bearing 25x33x20 , needle bearing 6910 , tapered roller bearing 30204 j2byq , taper roller brg 31311 , thrust ball brg 51126 , thrust ball brg 51136 , thrust ball bearing 51322 , sph roller brg 22222 e , support rollers natr 25

Central Government/Public Sector

CTN :45303515

27 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For spares for huagheng orbital welding machine - spare wire feed roller (feeding rollers), od 1.0mm for huagheng orbital tts welding head., spare wire feed roller (feeding rollers), od 0.8mm for huagheng orbital tts welding head., spare wire feed roller (pressing rollers), od 0.8mm for huagheng orbital tts welding head., spare wire feed-in hose liner, 0.8mm, 12cm for huagheng orbital tts welding head, spare wire feed roller bearing (1 set=2 nos in each type) for huagheng orbital tts weldinmg head., spare wire feed nozzle, od: 1.0mm for huagheng orbital tts welding head., spare wire nozzle, od: 0.80mm for huagheng orbital tts welding head., spare paper roll for printer for huagheng orbital tts welding head., spare tungsten electrode holder od: 2.4 mm for huagheng orbital tts welding head., spare gas lens, od: 24mm for huagheng orbital orbital tts welding head., spare wire feeding hose for huagheng orbital tts welding head., spare seals used in welding head (all types of o-ring, 1 pkt =10nos) for huagheng orbital tts welding head., spare clamp block for huagheng orbital tts welding head, spare wire nozzle clamp., spare jd-7 ceramic nozzle for small torch (standard), spare knob for small torch for huagheng orbital tts welding head, spare cushion for small torch for huagheng orbital tts welding head, spare wire support for small torch for huagheng orbital tts welding head, spare small welding torch for huagheng orbital tts welding head., spare arc ignition ring for small torch for huagheng orbital tts welding head., coolant (5 ltr /per can) for huagheng orbital tts welding head, spare t8 localizer for tube id: 10.30mm for huagheng orbital tts welding head., spare t8 rolling head for huagheng orbital tts welding machine, spare t8, 45 degree mounting plate for localizer seat for huagheng orbital tts welding head.

State Government

CTN :45301000

01 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For procurement of internal spares of esp u#04 coh. - plain bearing (modified), pin wheel big. outer part, bhel faa-5x36-2x84125-2 pin wheel small, support bearing for vertical shaft, fastnrs m 16 x 70, fastnrs m 16 x 100, fastnrs m 12 x 50, ht 8.8 grade metric plain hex nut m 16

corporations/Associations/Others

CTN :45303192

08 Jun, 2026 5.55 Lacs

Aligarh - Uttar Pradesh

Tender For tender for supply of back wash pump spares -lock nut (shaft) , moc bs 970 en-8 , part no.-93.153 , model- vo 80/230+tch+n , lock washer (shaft) , part no.-94.053 , moc is 226 c15 , model- vo 80/230+tch+n , lock nut (brg. collar) , part no.-93.152 , moc bs 970 en-8 , model- vo 80/230+tch+n , lantern ring , part no.-46.10 , model- vo 80/230+tch+n , gland ring , part no.-46.9 , moc is 318 gr2 , model- vo 80/230+tch+n , circlip of backwash water pump (filters) moc is 3075 1965 model- vo 80/230+tch+n , drive shaft of backwash water pump (filters) moc aisi-410 , model- vo 80/230+tch+n , line shaft of backwash water pump (filters) moc aisi-410 , model- vo 80/230+tch+n , pump shaft of backwash water pump (filters) moc aisi-410 , model- vo 80/230+tch+n , coupling ring of backwash water pump (filters) moc aisi-410 , model- vo 80/230+tch+n , coupling nut of backwash water pump (filters) moc aisi-410 , model- vo 80/230+tch+n , coupling sleeve of backwash water pump (filters) moc aisi-410 , model- vo 80/230+tch+n , bush bearing (star) of backwash water pump (filters) moc cutless rubber with bronze sleeve , model- vo 80/230+tch+n , moc cutless rubber with bronze sleeve bush bearing (pump) of backwash water pump (filters) , model- vo 80/230+tch+n , shaft sleeve (p. end) of backwash water pump (filters) moc aisi-410 , model- vo 80/230+tch+n , impeller nut of backwash water pump (filters) moc aisi-316 model- vo 80/230+tch+n , gasket (impleller) of backwash water pump (filters) moc teflon , model- vo 80/230+tch+n , gasket (impleller nut) of backwash water pump (filters) moc teflon , model- vo 80/230+tch+n , complete cooling water pipe line set with conneters at both end (lubrication pipe line) moc-aisi-30 4.model- vo 80/230+tch+n , star support for back wash pump pump moc-is-210fg260 , type- vo 80/230+tch+n , size-100x80 , , bush housing/17.5 of vo 100/400 + cpc pump moc-2%ni.cl , type- vo 80/230+tch+n , size-100x80 , , bearing coller/53.952 of vo 100/400 + cpc pump moc-is 226 c15 , model- vo 80/230+tch+n , make-sam turbo pvt. ltd. , , model- vo 80/230+tch+n vo 100/400 + cpc pump make-sam turbo pvt. ltd.bearing cap/37.052 of mocis 210 fg 200 , adjusting screw/91.19 moc-is 1363 ms , model- vo 80/230+tch+n , make-sam turbo pvt. ltd. , drive column pipe moc is 1239 part i heavy for type- vo 80/230+tch+n , size-100x80 , back wash pump , line column pipe moc is 1239 part i heavy for type- vo 80/230+tch+n , size-100x80 , back wash pump , pump column pipe moc is 1239 part i heavy for type- vo 80/230+tch+n , size-100x80 , back wash pump , volute casing , part no.-11.4 , moc -2% ni.ci to is 210 fg 260 (300 bhn) model- vo 100/400+tch+n , make-sam turbo pvt. ltd. , complete pump drive coupling set (dia-220) moc-is210fg260 of vo 100/400 + cpc pump , bearing housing/36.052 moc-is 210 fg 200 of vo 100/400 + cpc pump , impeller /24.2 moc-2.0%nici to is 210 fg 260 type-vo 100/400 + cpc pump

CTN :45305462

16 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For supply of ecp bulk acid unloading pumps and bulk acid transfer pumps spares for regular and breakdown maintenance of the equipment in sd-i - casing o ring, neophrene, p.no.30 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, splite flange delivery,ci(is:210gr.fg260), p.no.29 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, splite flange suction, ci(is:210gr.fg260), p.no.28 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, coupling key, ss (6x6x630) p.no.27 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, gland plate studs, m8, p.no.26 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, casing studs, m12, p.no.25 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, o-ring far end, (80x30)neoprene, p.no.24 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, impeller gasket, viton, p.no.22 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, thrower, uhmwpe, p.no.21 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, o ring (drive end), 90x3 neoprene, p.no.20 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, oil drain plug, zinc coated ms, p.no.19 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, oil seal (far end), 30x42x10, p.no.18 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, housing support, ms (is:2062) ,p.no.17 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, shaft, ss 431 ,p.no.14 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, breather, zinc coated m.s., p.no.13 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, casing mouting ring, ms (is:2062), p.no.10 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, oil seal (drive end), 35x47x10, p.no.09 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, bearing cover (f e), ci(is:210gr.fg260), p.no.08 for pump model: pphp3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, gland cover, ss-316, p.no.07 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, bearing cover (d e), ci(is:210gr.fg260), p.no.06 for pump model: pphp3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, bearing housing, ci(is:210gr.fg260)p.no.05 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, shaft sleeve, hostelloy c, p.no.04 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, back plate, uhmwpe, p.no.03 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, impeller, uhmwpe, p.no.02 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, impeller casing, uhmwpe, p.no.01 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440

CTN :45303135

02 Jun, 2026 NA

Palakkad - Kerala

Tender For supply of 130050762664-centering ring (inner) , 130050761484- center ring , 521id11051-bearing support

CTN :45304567

08 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od b g.i pipe. seat rest pipe 42 mm od b class g.i pipe. handl

CTN :45305833

08 Jun, 2026 35.94 Lacs

Faridabad - Haryana

Tender For beautification works in including play equipment, open gym, plantation and repairing of boundary wall at brahampuri park saran village boosting park in ward no. 09 nit faridabad.(recall) - labour charge for making tee connection with existing line excavation, cutting jointing and making connection with existing line complete in all respect, supply and fixing of pvc tee 150x150x150mm dia., chain swing (2seater): 10 l x 6 w x 8 .5 h. horizontal frame and vertical legs is of m.s. pipe 2 x 12 gauge. it stays with m.s. pipe 1 x 12 gauge. swinging seats-2nos is of frp molded seat of 2mm thick fitted with m.s. pipe frame x 12 gauge which hang with m.s. chain 6mm thick duly plated with ball bearing and m.s. flat 6mm thick housing. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., sea saw (4seater): - 8 l x 5 .5w x 15 high. frame is of m.s. pipe 2 x 12 gauge. sitting planks is of m.s. pipe 2 x 12 gauge and its cantilever and handles is of m.s. pipe x 12 gauge. sitting seats 4 nos. is of molded frp material in 3mm thick with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and labor at site., bridge ladder: 10 l x 2 w x 6 h. horizontal ladder is of m.s. pipe 2 , andamp: vertical ladder is of same material of 12-gauge isi mark with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and amp: labor at site., merry-go-round (4-seater): 5 dia. main frame is of m.s. sq. pipe 2 x 2 x 14 g and having suitable handle andamp: foot-rest is of round pipe x 12 gauge. central pipe is of m.s. pipe 3 x 12 g with heavy duty shaft 50mm thick andamp: ball bearing assembly. it consists of 4no chair made of molded frp plastic. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., pvc reducer 150mm x 100mm.., frp dustbin (tilting type) of capacity 60 ltr. body is made of moulded fiberglass re-enforced plastic (non- halogen fire retardant resign) of 2mm thick having its lid with handle. it fitted with m.s. square pipe 1.25` x 1.25` x 14 gauge and m.s. flat 50 x 5mm, 30x 5mm base structure with epoxy primer interseal 670 hs and pu finish (interthane 990) paints. complete item with gst. transportation, installation with cc and labor at site., making connection with existing sewer main line, p/f of pvc 100mm dia bend., supply of pvc pipe 150 mm dia with isi mark 8kg.cm2 pressure, supply of good earth complete as per site requirement, p/f chest press is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi-pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from roto-moulde. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used., p/f seated puller is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 50mm and 25mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used, p/f sky walker is made from is-1239 b class

CTN :45111590

25 May, 2026 2.00 Lacs

Palacode - Tamil Nadu

Tender For corrigendum : tender notice for purchase of risansi pump spares - stuffing box, (spares for risansi pump, make: risansi, model :prl26214aabn, size: 150x150mm), shaft, (spares for risansi pump, make: risansi, model :prl26214aabn, size: 150x150mm), bearing support ring, (spares for risansi pump, make: risansi, model :prl26214aabn, size: 150x150mm), circlip lock, (spares for risansi pump, make: risansi, model :prl26214aabn, size: 150x150mm), coupling rod, (spares for risansi pump, make: risansi, model :prl26214aabn, size: 150x150mm), head pin, (spares for risansi pump, make: risansi, model :prl26214aabn, size: 150x150mm), sleeve ring (two), (spares for risansi pump, make: risansi, model :prl26214aabn, size: 150x150mm), sleeve ring (four), (spares for risansi pump, make: risansi, model :prl26214aabn, size: 150x150mm), boot seal (two), (spares for risansi pump, make: risansi, model :prl26214aabn, size: 150x150mm), stator, (spares for risansi pump, make: risansi, model :prl26214aabn, size: 150x150mm), felt ring, (spares for risansi pump, make: risansi, model :prl26214aabn, size: 150x150mm), gland bolt (two), (spares for risansi pump, make: risansi, model :prl26214aabn, size: 150x150mm), bearing housing, (spares for risansi pump, make: risansi, model :prl26214aabn, size: 150x150mm)

Bearing Cartridge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others