Latest bearing container Tenders | Government bearing container Tenders

Central Government/Public Sector

CTN :45733184

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dredger drum, chain, centering disc, ms liners, center pivot washer, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, wear plate, adopter wide jaw, suspension rods ,equalizing stay, erc clips, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, adapter broken, center pivot top, anvil, workout sab, plate screws, transformer body and its ms parts, knuckle, fabricated test rig, gear wheel, anchor link, brake beam cut parts, axle box housing, bearing plates, rivette, chair plate, ms bed plate, ms gauge tie plate, structure bar, ms tie plates, slide chaires, center pivot, tamping tools, jim crow, cribs, track machine parts, locking plate, operating handle, cbc lock, cbc yoke, lower spring sheet beam, rail tong, center beams, screw couplings, lower spring sheet beam, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, iron rods, wire, bolt & nut and other items coming under ms scrap on as is where is condition is available under the custody of cdms 08 ward ap. note: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only.(loc:bin no. 121 at scrap yard)

Central Government/Public Sector

CTN :45723587

07 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned, scrap various types of cast iron items like hearth border piece, wall border piece, gate valves, side casting, plumber block, bridge tubes, pipes, valves, moulding boxes, pot sleepers, bearing boxes, bearing plates, other ci items etc., with or without damaged and broken condition as available in the lot. note : the lot shall be delivered as is where is basis. other items except cast iron items in the lot is not permitted to take while delivery. purchaser can inspect the materials thoroughly before e-auction. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. purchaser should arrange all lifting equipment like forklift, poclain, jcb etc., to lift the cast iron items while delivery. delivery unit : in mt

Central Government/Public Sector

CTN :45723588

07 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned alloy steel bearing sleeves, bushes, disc springs, connecting rod bearing pots, hardened pot ring, link plate, coupling, worm shafts, link plates, bearings etc,. of various types and sizes with or without damaged and broken condition as available in the lot area. note: the lot shall be delivered as is where is basis. purchaser can inspect the materials thoroughly before e-auction. purchaser should arrange all lifting equipment like forklift, poclain, jcb etc., to lift the above items while delivery. metal content: alloy steel delivery unit : in mt

CTN :45713190

10 Jul, 2026 4.54 Lacs

Samba - Jammu And Kashmir

Tender For supply of pot ptfe fixed bearing. as per drawing attd , pot ptfe transverse guided bearing. as per drawing attd , pot ptfe free bearing. as per drawing attd , pot ptfe longitudinal guided bearing. as per drawing attd , elastomeric bearing size 450 mm x 300 mm, 100 mm thick.

CTN :45657838

07 Jul, 2026 1.10 Crore

Multi City - Multi State

Tender For tender for supply of engine stopping solinoid (starter pinion) , fan belt , water pump , bearing for central brush , push button , clutch plate , pressure plate assy , withdrawal bearing , spigot bearing , clutch master cylinder , clutch slave cylinder , cooling sytem hoses and inter cooler hose set , main brush supporting wheel , v belt for blower (set of 5) , v belt for hydraulic pump (set of 2) , fan belt , hydraulic hoses , purging valve , seal kit for purging cylinder , sael kit for door lifting cylinder , seal kit for locking cylinder , seal kit for magnet lift cylinder , seal kit hood lifting cylinder , speed cable , starter motor , alternator , hood wheel bearing , steering presuure pipe , steel resevoir , combonation switch , ignition switch , rear equipment electrical selector switch , pneumatic tank drain valve , dlvt valve (dlvt-3) , pvc block , pvg coil , main hydraulic pump , hydrauilc motor for central brush , pto pump , hydraulic cylinder for dooe opening , main tipping cylinder , hood lifting cylinder , hydraulic cylinder for magnet , fuel hoses , tappet cover packing (tappet gasket) , compressor gasket , fip coupling , air dryer (rear engine) , hydraulic suction rear filter , return oil filter element , main blower bearing sleeve (blower bearing , main blower bearing sleeve (suction beraing) , bearing for brush hood wheel , fly wheel assy , fly wheel ring , water pump rear engine , silicon hose 6dti-f2 , air filter element (inner) , starter solinoid s/w , starter pinion , alternator regulator with brush , alternator rectifier assy , wiper blades , steering oil filter , central brush , pleated filter ( 1 set of 30 nos and 1 set of 28 nos) , pick up suction hose , hump hose , suction hood rubber sealing , flexible hose of water springler , pot meter for central brush speed , pressure gauge for air reciever , pressure relief valve , pu tube (1 mtr) , purging valve hose , temerature gauge , oil pressure gauge , air drier (front engine) , air pressure gauge , rpm meter gauge , water spraying pneumatic pump , main door lock cylinder

CTN :45645887

30 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - p.l no. 98050047. scrap c & w fittings consisting of bolster hanger ,anchor link, c buffer flange, control arm assembly, equalizing stay, brake head, striker block, face plate, locking plate, spare parts of brake cylinder, crank shaft of main compressor, knuckle, cbc, cbc coupler, axle box , laminated pole shoe, housing, bcn door, tension rod assembly, rear cover, suspension tube, brake beam, dash pot, buffer ,oil thrower, top casting, brake cylinder(ferrous) ,bottom casting, lower spring beam, oxy. cut ferrous ball bearing, miscellaneousellaneous spares parts of valve & cock, draft pad, screw coupling, yoke , hand bar, pull road, cam shaft, axle cap, ferrous bearing of sorts and sizes, ferrous part of different type of valve, collar ,ring, racer, socket head, jumper head, felt ring, ms cylinder, buffer casing, draw bar hook, hanger block, chain bolt, chute plate, wear plate, flap plate, draft gear, brake cylinder, pinion, impeller, schaku coupler parts, traction motor parts, nut bolts, pin, icf bogie component and miscellaneousellaneous ferrous items etc. as available in the lot, except any non ferrous. qty-150mt. location-east of vm road in ncb- 08.

Central Government/Public Sector

CTN :45593136

29 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of pway scrap - released and unserviceable cl.iii rails to be delivered on linear measurement basis. (1) ds8 no.079558-25-00027-(i)rail 52kg-13 nos-74.50 mtrs-3.866 mts, (ii)rail 90r-9 nos-50.52 mtrs-2.255 mts, (iii) rail 60r-5 nos-19.20 mtrs-0.571 mts, (iv)rail 75r-04 nos-11.52 mtrs-0.428 mts, (v)rail 50dh-05 nos-19.44 mtrs-0.482 mts. (2)ds8 no.- 079558-25-00028-(i)rail 50dh-157.20 mtrs-3.899 mts, (ii)rail 60r-43.23 mtrs-1.287 mts (iii)rail 90r-53.78 mtrs-2.401 mts, (iv)rail 52kg-23.61 mtrs-1.225 mts, (v)rail 75r-7.60 mtrs-0.282 mts. total qty.-16.696 mts. not for sale:. (1) ds8 no.079558-25-00027-(i)check rail-4.12(2 nos), (ii)fish plate-22 nos, (iii)bolt & nut-45 nos, (iv)ci chair-115 nos, (v) l angle-4 nos. (2)ds8 no.- 079558-25-00028-(i)s.no.5 rail 90r-0.59m, (ii)rail 50dh-0.46, 0.81, 0.97, (iii)wheel stopper-1 no, (iv)fish plate-28 nos, (v)bolt & nut-58 nos, (vi)bearing plate-4 nos, (vii)monkey chair-1 nos, (viii)psc sleeper-34 nos, (ix) cst 9 plate ci pot, cst sleeper-not visible for counting. any other material in the lot other than the items earmarked for sale as per do should be handed over to the custodian as nfs. note: when scrap rails for delivery on sectional weight basis are longer than five metres, to facilitate loading, purchasers (by engaging his own labourers) are permitted to cut the rails to convenient lengths of not less than 2.5 metres. s.1539 (ds-8) no. (1)079558-25-00027 (2) 079558-25-00028 dt 28.02.26. hsn code: 720429. pl. no 98011224. custodian: -sse/p.way/tpj.

Central Government And Public Sector

CTN :45571784

18 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of pway scrap - hook bolt off size (us) broken/s tie angel corrugated (u/s), chequered plate corroded (us),m/s clit inner/outer with t bolt (us) broken, fish plate 52 kg off size (us) broken, fish plate 60 kg 0.910mm glued (us) broken, stretcher bar us broken, slide chair plate (us) broken, check rail heel block off size (us) broken, metal liner t-3741/3742 (us), erc (us) broken, plate screw off size (us) broken, cst -9 pot (52kg/90r) (us) broken, 90 r fish plate us/broken, sej bearing plate (us) broken, different sizes bolts & nuts, misc/scrap; compressing of i) cut piece of flange different sizes, ii)others

State Government

CTN :45562938

22 Jun, 2026 NA

Ranchi - Jharkhand

Tender For stone boulder of size 150 mm and below at source quarry supply of quarried stone 150-200 mm size for hand broken at source quarry boulder with minimum size of 300 mm for pitching at source quarry coarse sand i) at source coarse sand ii) at source fine sand at source quarry moorum at source quarry gravel/quarry spall at source quarry granular material or hard murum for gsb works at source quarry fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant filter media/filter material as per table 300-3 (mort&h specification) at crusher. close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher. close graded granular sub-base material 37.5 mm to 9.5 mm at crusher. close graded granular sub-base material 26.5 mm to 9.5 mm at crusher. close graded granular sub-base material 9.5 mm to 4.75 mm at crusher. close graded granular sub-base material 9.5 mm to 2.36mm at crusher. close graded granular sub-base material 4.75mm to 2.36mm at crusher. close graded granular sub-base material 4.75mm to 75 micron at crusher. close graded granular sub-base material 2.36 mm & below at crusher. stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher. coarse graded granular sub-base material 2.36 mm & below at crusher. coarse graded granular sub-base material 4.75 mm to 75 micron at crusher. coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher. coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher. coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher. coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher. coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher. coarse graded granular sub-base material 53 mm to 26.5 mm at crusher. aggregates below 5.6 mm at crusher. aggregates 22.4 mm to 2.36 mm at crusher. aggregates 22.4 mm to 5.6 mm at crusher. aggregates 45 mm to 2.8 mm at crusher. aggregates 45 mm to 22.4 mm at crusher. aggregates 53 mm to 2.8 mm at crusher. aggregates 53 mm to 22.4 mm(grade iii) at crusher. aggregates 63 mm to 2.8 mm at crusher. aggregates 63 mm to 45 mm (grade ii)at crusher. aggregates 90 mm to 45mm(grade i) at crusher. aggregates 10 mm to 5 mm at crusher. aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher. aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher. aggregates 13.2 mm to 5.6 mm at crusher. aggregates 13.2 mm to 10 mm at crusher. aggregates 20 mm to 10 mm at crusher. aggregates 25 mm to10 mm at crusher. aggregates 19 mm to 6 mm at crusher. aggregates 37.5 mm to 19 mm at crusher. aggregates 37.5 mm to 25 mm at crusher. aggregates 6 mm nominal size at crusher. aggregates 10 mm nominal size at crusher plant. aggregates 13.2/12.5 mm nominal size at crusher plant. aggregates 20 mm nominal size at crusher plant. aggregates 25 mm nominal size at crusher. aggregates 40 mm nominal size at crusher. crushing of stone aggregates (gsb crusher run) ac pipe 100 mm dia acrylic polymer bonding coat alluminium paint aluminium alloy plate 2mm thick aluminium alloy/galvanised steel aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm barbed wire bearing (cost of parts) bearing (cast steel rocker bearing assembly of 250 tonne ) road studs 100x100mm fitted with lense reflectors vide clause cl 804.2 of morth (5th revision) bearing (elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of vulcanisation) taking elastomeric bearing of size 500 x 400 x 96mm, overall volume=19200 cubic cm bearing (forged steel roller bearing of 250 tonne) bearing (pot type bearing assembly consisting of a metal piston supported by a disc, pt

Central Government / Public Sector

CTN :45536547

29 Jun, 2026 8.26 Lacs

Ahmednagar - Maharashtra

Tender For auction sale of residential - all that piece and parcel of row-block unit no. 3, phase no. 4, constructed on plot admeasuring 24.09 square meters, having ground floor rcc construction area of 24.09 square meters and first floor construction area of 13.81 square meters, aggregating to a total built-up area of 37.90 square meters, carved out of 0 hectare 04 are (400 square meters) from the ownership land bearing survey no. 232/3a/2/1, h.r. 2.12, r.p. 1.53, pot-kharab 0.05, total 2.17, situated at village nagardevale, within the jurisdiction of zilla parishad, nagar sub-division, district ahmednagar.

Bearing Container Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

State Government

Central Government / Public Sector