Latest bearing house Tenders | Government bearing house Tenders

State Government

CTN :45533108

23 Jun, 2026 1.87 Lacs

Jhajjar - Haryana

Tender For job no.1212/2026 (hew) work of providing and fixing and installation open gym equipments and supply and installation cast iron bench in prithviraj chauhan park in sector-6, at u/e jhajjar and all other works contingent thereto. (re-invited) - 26.58.3 supply and installation of garden bench3 cast iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. seat and back shall be made of 10 stripsof m.s. pipes 63 mm x 25 mm of 14 gauge with one m.s. flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. spray painted with approved brand paint. fixed by grouting with 1:2:4 cement concrete (minimum weight of each bench 105 kg). all materials required to be as per bis specifications., app. item double cross trainer main pipe 114 mm od & 3.75 mm thickness m/s round pipe handles made of 38mm x31 mm m/s round pipe with best quality rubber handle for hand grip working with rubber seal bearing system and foot rest main pipe for 60 x 40 mm m/s flat pipe size of foot rest 5.5"x12" with base plastic cover all alloy cover with ss cover all m/s pipe best quality powder coating., app. item double leg press main round pipe 114 mm od & 3.75 mm thickness m/s round pipe seat made of m/s sheet 16gauge size of seat is 12"x12" fixed on 48 od round pipe smoothly working with rubber bearing system all alloy covered with s.s cover plastic base cover and best quality powder coating., app. item shoulder bilder main pipe 114 mm od & 3. 75mm thickness 17" round wheel made of 31 mm round pipe 25 mm round pipe with bearing system and s.s nut cover with plastic handle and u bend join with main 114 mm pipe for steering wheel is 48 mm od round pipe all alloy cover withs s cover best quality plastic handle on wheels &base fixed with nut bolt 8 mm m/s plate with plastic cover with best quality powder coating, app. item double chest press made of 114 mm od & 3.75mm thickness 38 mm round pipe 48 mm round pipe soxs0 mm sq pipe complete operating with bearing system with rubber seal bearing all alloy are covered the s.s covers & best quality rubber handles for grip and smoothly working. plastic base cover and best quality powder coating

State Government

CTN :45533116

23 Jun, 2026 1.87 Lacs

Jhajjar - Haryana

Tender For job no.1213/2026 (hew) work of providing and fixing and installation open gym equipments and supply and installation cast iron bench in swami omanand smriti van park in sector-6 at u/e jhajjar and all other works contingent thereto. (re-invited) - 26.58.3 supply and installation of garden bench3 cast iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. seat and back shall be made of 10 stripsof m.s. pipes 63 mm x 25 mm of 14 gauge with one m.s. flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. spray painted with approved brand paint. fixed by grouting with 1:2:4 cement concrete (minimum weight of each bench 105 kg). all materials required to be as per bis specifications., app. item double cross trainer main pipe 114 mm od & 3.75 mm thickness m/s round pipe handles made of 38mm x31 mm m/s round pipe with best quality rubber handle for hand grip working with rubber seal bearing system and foot rest main pipe for 60 x 40 mm m/s flat pipe size of foot rest 5.5"x12" with base plastic cover all alloy cover with ss cover all m/s pipe best quality powder coating., app. item double leg press main round pipe 114 mm od & 3.75 mm thickness m/s round pipe seat made of m/s sheet 16gauge size of seat is 12"x12" fixed on 48 od round pipe smoothly working with rubber bearing system all alloy covered with s.s cover plastic base cover and best quality powder coating., app. item shoulder bilder main pipe 114 mm od & 3. 75mm thickness 17" round wheel made of 31 mm round pipe 25 mm round pipe with bearing system and s.s nut cover with plastic handle and u bend join with main 114 mm pipe for steering wheel is 48 mm od round pipe all alloy cover withs s cover best quality plastic handle on wheels &base fixed with nut bolt 8 mm m/s plate with plastic cover with best quality powder coating, app. item double chest press made of 114 mm od & 3.75mm thickness 38 mm round pipe 48 mm round pipe soxs0 mm sq pipe complete operating with bearing system with rubber seal bearing all alloy are covered the s.s covers & best quality rubber handles for grip and smoothly working. plastic base cover and best quality powder coating

Central Government/Public Sector

CTN :45578647

26 Jun, 2026 4.15 Lacs

Kollam - Kerala

Tender For supply of supply of needle bar guide , supply of pressure foot guide arm , supply of throat plate screw , supply of thread tension screw , supply ofthread tension nut , supply of tension disc , supply of tension spring , supply of feed dog arm pin , supply of feed dog arm pin nut , supply of drive pin , supply of needle bell crank taper pin screw , supply of needle drive arm bearing cap , supply of needle drive arm end screw , supply of sewing head fixing nut , supply of looper screw , supply of looper nut , supply of grub screw eccentric , supply of grub screw special , supply of pressure foot roll screw , supply of needle tension spring , supply of screw special , supply of needle drive sleeve , supply of one byfour dia brt ms washer , supply of five by sixteen dia plain washer , supply of oscillator bar , supply of feed dog 8 teeth , supply of throat plate , supply of pressure foot assly , supply of looper oscillating block screw , supply of looper clamp assly , supply of looper drive link , supply of looper drive link taper pin , supply of nibbler kinfe , supply of needle bar thread eyelet , supply of needle clamp nut , supply of feed dog arm bell crank , supply of feed dog arm pin sleeve , supply of feed dog arm pin spring , supply of oscillator pin , supply of feed dog strut , supply of fee dog strut retainer , supply of assly oscillating block complete , supply of looper , supply of needle , supply of needle drive link , supply of needle drive link taper pin , supply of grub screw standard , supply of nut special , supply of needle bar bush , supply of pressure foot hinge pivot screw , supply of fibre disc retaining screw , supply of thread eyelet , supply of feed dog arm shaft nut , supply of thread guide , supply of feed dog arm shaft , supply of looper drive sleeve , supply of arrgt of oscillating block , supply of pressure foot guide stud , supply ofneedle drive sleeve clamping screw //bid details 2 / 61

CTN :45558459

29 Jun, 2026 NA

Jhabua - Madhya Pradesh

Tender For providing and supply of water supply relevant items for nagar parishad ranapur - gi pipe (1¼ inch, class b); gi rod with socket; gi socket (1¼ inch, heavy); heavy cylinder assembly; no. 16 nut-bolt; chain; rod socket; heavy water tank; cylinder rubber ring; cylinder rubber washer (with collar); cylinder rubber washer (without collar); plunger pin rubber washer; lower valve rubber washer; handpump nut-bolt (no. 18); nut-bolt (8mm x 9 inch); ci design 15-maker (6 inch); ci design 10-maker (6 inch); ci design (3 inch); ci design (4 inch); rubber ring (6 inch); rubber ring (4 inch); rubber ring (3 inch); rubber packing (6 inch); rubber packing (4 inch); rubber packing (3 inch); nut-bolt (10mm x 3 inch); nut-bolt (10mm x 4 inch); nut-bolt (8mm x 3 inch); nut-bolt (8mm x 4 inch); nut-bolt (8mm x 6 inch); ci tailpiece (3 inch); ci tailpiece (4 inch); ci tailpiece (6 inch); pvc pipe (6 inch, 6 kg); pvc pipe (6 inch, 10 kg); pvc pipe (4 inch, 6 kg); rubber ring (8 inch); ci tailpiece (8 inch); pvc pipe (3 inch, 10 kg); pvc pipe (3 inch, 6 kg); pvc coupler (6 inch, 6 kg); pvc coupler (6 inch, 10 kg); pvc coupler (3 inch). pvc bend (6-inch, 10 kg/cm²), pvc bend (6-inch, 6 kg/cm²), pvc bend (4-inch, 10 kg/cm²), pvc bend (3-inch, 10 kg/cm²), pvc bend (90mm), ci tee (160x160x160mm), ci tee (160x90x160mm), ci tee (160x110x160mm), ci tee (90x90x90mm), pvc bend (160mm), pvc tee (160mm), pvc tee (6x6x6 inch, 10 kg/cm²), pvc tee (6x3x6 inch, 10 kg/cm²), pvc tee (3x3x3 inch, 10 kg/cm²), rubber sheet, pvc solvent cement, suction pipe (3-inch, for water pump), suction pipe (2.5-inch), pvc foot valve (6-inch, for water pump), pvc foot valve (3-inch, for water pump), delivery pipe (2.5-inch), delivery pipe (3-inch), suction pipe (4-inch, for water pump), gi pipe (1/2-inch), alum (high quality), bleaching powder (high quality), gi flange (3-inch), gi flange (4-inch), gi flange (6-inch), gland rope (6mm, 8mm, 10mm, 12mm), aluminium wire (6mm, 8mm, 10mm, 12mm, 16mm), water tanker for drinking water (5000 liters). pvc coupler (6 kg, 6-inch); kirloskar ci foot valve (65mm, 80mm, 100mm, 150mm); copper wire (7/16); 3-core copper cable (6mm, 8mm); high-quality cutout (63a, 100a, 200a); main switch (100a, 200a); bearings (6307, 6308, 6309, 6310); pvc reducer (6x3, 6x4, 4x3); starter panel (2 hp, 5 hp); star-delta starter (10 hp, 15 hp, 30 hp); submersible pump (2 hp); water motor (2 hp, 5 hp); handpump bearing; handpump axle; ci double air valve (80x80, 80x100); pvc end cap (6 kg: 160mm, 90mm, 110mm). pvc 10 kg/cm² end cap 110 mm, pvc 10 kg/cm² end cap 160 mm, pvc 10 kg/cm² 8-inch pvc coupler, 6 kg/cm² 8-inch pvc coupler, 10 kg/cm² 10 hp monoblock motor (kirloskar), 90 mm hdpe ci joint, 110 mm hdpe ci joint, 140 mm hdpe ci joint, 160 mm hdpe ci joint, 180 mm hdpe ci joint, 200 mm hdpe ci joint, 225 mm hdpe ci joint, 250 mm hdpe ci joint, 280 mm hdpe ci joint, 300 mm hdpe ci joint, 90 mm hdpe rubber ring, 110 mm hdpe rubber ring, 140 mm hdpe rubber ring, 160 mm hdpe rubber ring, 180 mm hdpe rubber ring, 200 mm hdpe rubber ring, 225 mm hdpe rubber ring, 250 mm hdpe rubber ring, 280 mm hdpe rubber ring, 300 mm hdpe rubber ring, 90 mm hdpe pipe 6 kg/cm², 110 mm hdpe pipe 6 kg/cm², 140 mm hdpe pipe 6 kg/cm², 160 mm hdpe pipe 6 kg/cm², 180 mm hdpe pipe 6 kg/cm², 200 mm hdpe pipe 6 kg/cm², 225 mm hdpe pipe 6 kg/cm², 250 mm hdpe pipe 6 kg/cm². 280mm hdpe pipe (6 kg/cm²), 300mm hdpe pipe (6 kg/cm²), d-joint 200mm ci (class 10), d-joint 200mm ci (class 15), ms plate 16mm (4x4 ft), ms plate 18mm (4x4 ft), 30 hp monoblock pump (80m head, 2880 rpm), 25 hp submersible pump, 20 hp submersible pump, handpump vice/clamp, taparia handpump pipe wrench (24-inch), taparia handpump pipe wrench (14-inch), taparia open-end spanner set, taparia ring spanner set, taparia box spanner set, ci tee 200x200x200mm, ci tee 200x150x200mm, pvc tee 6x4x6 inch (10 kg/cm²), ci d-joint 6-inch (4-inch collar ring), ci d-joint 8-inch (4-inch collar ring), ci d-joint 4-inch (4-inch collar ring), ci d

CTN :45482035

18 Jun, 2026 19.50 Lacs

Rohtak - Haryana

Tender For corrigendum : supply of various parts of horizontal pumps and tools... - ms flat 50*5 mm, ms angle 50*50*5mm, 50*50*6mm (tata,sail,jindal make), ms channel ismc 100 (tata,sail,jindal make), ss round bar 30 mm(line shaft), ss round bar 40 mm(line shaft), plastic rope 3/4", nut & bolt 5/8"x 3", m.s nut & bolt 5/8" x 21/2", ms nut bolt 5/16x 1.5", ms nut bolt 1/2" x 2", ms nut bolt 1/2" x 11/2", ms nut & bolt 1/2" x 21/2", ms nut & bolt 1/2" x 3", ss nut bolt 3/4x3, stud with nut 11/16 x 5/8 x 3", stud with nut 5/8x 5/8 x 3", gi wire 8 swg, gland packing 3/8", gland packing 1/2", lift belt 5ton cap x 4 mtr, lift belt 3ton cap x 3 mtr, lift belt 3ton cap x 2 mtr, gland plate for n.w-12d, gm gland plate for 5 c/s v.t pump as per sample, g.m gland plate for 10 c/s v.t pump as per sample, pipe wrench 12"(300mm size) (taparia/pye/miranda/spartan/stanley make ), hammer 1lbs, screw driver 10" 250mm (taparia/pye/miranda/spartan/stanley make ), screw driver 12" (taparia/pye/miranda/spartan/stanley make ), screw driver 8" (taparia/pye/miranda/spartan/stanley make ), ring spanner 24x26mm (taparia/pye/miranda/spartan/stanley make ), insulated plier 8" (200mm) (taparia/pye/miranda/spartan/stanley make ), long nose plier 8" (taparia/pye/miranda/spartan/stanley make ), d-e spanner 21x23 (taparia/pye/miranda/spartan/stanley make ), d-e spanner 24x26mm (taparia/pye/miranda/spartan/stanley make ), d-e spanner 14x15mm (taparia/pye/miranda/spartan/stanley make ), d-e spanner 12x13mm (taparia/pye/miranda/spartan/stanley make ), ring spanner 14x15 (taparia/pye/miranda/spartan/stanley make ), ring spanner 21x23 (taparia/pye/miranda/spartan/stanley make ), ring spanner-12x13 (taparia/pye/miranda/spartan/stanley make ), line tester (7"- 8") (taparia/pye/miranda/spartan/stanley make ), freemans 5mx19mm measuring tape with belt clip and lock, hexa blade one side/double side mix, welding holder heavy duty, hdpe tirplaine 15 x12 heavy duty, coupling tyre tc 13, delivery casing for nw-12d inner for kirlosker pump, delivery casing for nw-12d outer for kirlosker pump, impeller 6x6 nw-12d kirloskar pump, bearing pedestal for nw-12d kirlosker make, shaft for nw-12 d pump kirlosker make, lantern ring for nw-12 d pump kirlosker make, water deflector for nw-12 d pump kirlosker make, abrasive cutting wheel 14 (grindwell norton, 3m, bosch make), motor shaft with check nut 5 c/s v.t pump as per sample, impeller nut mf for 5 cs horizontal pump as per sample, fuel pump gear tv-2 kirlosker make, servo super oil mg 20w-40, log book of vehicle (25 page) as per sample, mas register (50 page) as per sample, log book of machinery (25 page) as per sample, cyl liner with joint ring 1800801 kirlosker make, valve kit tv-2 kirlosker make, liner piston chota jawan kirlosker make, head gasket 87.5 mm 1180090300 kirlosker make, air cleaner kirlosker make, packing kit tv-2 kirlosker make, pipe t type kirlosker make, fuel tank complete kirlosker make, fuel filter assy kirlosker make, nozzale chota jawan kirlosker make, air cleaner chota jawan kirlosker make, packing kit chota jawan kirlosker make, valve kit chota jawan kirlosker make, head gasket chota jawan kirlosker make, diesel filter chota jawan kirlosker make, banjo bolt tv2 kirlosker make, nozzle 9430034216 kirlosker make, piston assy.180061000-1800615000 kirlosker make, cr bolt tv2 kirlosker make

CTN :45533008

20 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - retender - open gym equipment, od405580/2025-2026 horse rider - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link- made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm &8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm

CTN :45533036

20 Jun, 2026 7.99 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- development of ezhikkara grama panchayath ground in paravur lac, ernakulam district- supply and installation of open gym equipment - retender - inauguration stone and interlock laying for open gym area, od34726/2026-2027 providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre polished, machine cut for inauguration granite stone of required size, approved shade, colour and texture laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) joint treated with white cement, mixed with matching pigment, epoxy touchups including rubbing, curing etc. complete at all levels. area of slab over 0.50 sqm, 16.21 engraving letters in hard stone, od419846/2025-2026 providing and laying of interlock concrete block pavements having thickness 60mm (m35) as per drawings and technical specification clause 1504 confirming to is 15658 and laid in required colour and pattern over and including 50mm thick compacted bed of 6 mm metal including edge concreting for 300mm width and 150mm depth with cc m35( @ 0.045 m3/m), supply and installation of open gym equipment, od27550/2026-2027 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od30940/2026-2027 surfboard - dimensions: (l x w x h) 1090 x 890 x 1390 mm. main frame made from two pipes of ø 114 mm od b class gi pipe. foundation plate m.s. round plate of ø 250 mm & 8 mm thick. connecting pipe - ø 88 mm od b class gi pipe is used to connect both main frame pipes at top end and ø 42 mm pipe is used to connect at bottom end. handle - ø 42 mm and ø 33 mm od b class gi pipe. support pipe ø 60 mm must be used to support leg movement frame. leg movement frame ø 42mm od b class gi pipe. footrest - cast iron 325 x 270 x 8 mm thick and m.s. plate of 250 x 200 x 2 mm thick use for to support it. bracket - 8mm thick laser profile is used to support leg movement frame. top closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality

CTN :45579589

30 Jun, 2026 17.79 Lacs

Secunderabad - Telangana

Tender For auction sale of plot - description of the immovable property all that the property bearing house no. 1-6, ptin(1200100009), admeasuring 84 sq. yards having plinth area of 431 sq.ft in ground floor with acc roof situated at brahmanpally hamlet of thorrur village, abdhullapur revenue mandal, under thurkayamzal muncipality, rr dist, hyderabad, telangana, india 501510 and bounded by north neighbour's house, south: neighbour's house,east: 10 feet wide road, west neighbour's house

CTN :45579591

30 Jun, 2026 37.63 Lacs

Secunderabad - Telangana

Tender For auction sale of plot - description of the immovable property:all that the property bearing house no. 12-11-489/a, (old no. 12-11-489), admeasuring 73.94 sq. yards or 61.81 sq. meters, situated at warisguda, secunderabad, telangana state, hyderabad, india - 500061, and bounded by north: 5 feet wide lane, south: house no.12-11-488/1,east portion of h.no: 12-11-488, west house no.12-11-483.

CTN :45575566

29 Jun, 2026 12.78 Lacs

Multi City - Multi State

Tender For auction sale of flat - all that piece and parcel of flat no. 101, 1st floor, a wing admeasuring about 350 sq. ft. (built up/ carpet) in the building known as "shanti park" constructed on the free hold land bearing house no. 7367 survey no. 10 gaothan village, total land area 0-43-3 h.r.p., 0-03-3 po. kh. h.r.p. lying being and situated at village gokhivare taluka vasai east district palghar, maharashtra - 401208 owned by ajay ravindra yadav.

Bearing House Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector