Latest bearing sleeve Tenders | Government bearing sleeve Tenders

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

Central Government/Public Sector

CTN :45716157

09 Jul, 2026 NA

Nashik - Maharashtra

Tender For supply of pvc tube heat shrinkable sleeve c c - mh42500020210500 pvc tube , mh42500020210100 heat shrinking marker sleeves black , mh42500020210101 heat shrinking marker sleeves blue , mh42500020210102 heat shrinking marker sleeves transparent , mh42502018019030 silicon rubber attenuator , mh42500002010600 nylon tube

CTN :45739453

20 Jul, 2026 NA

Amritsar - Punjab

Tender For supply of ip camera , ofc unarmored 04 core cable , poe 04 ports managed switch , power supply and adaptor 5v 2 amp , power cable 1.5 mm 2 core 100 mtr , pvc box for poe switch , rj 45 connector , ofc joint box , extension cord 3 socket , electric power board 5 socket , sleeves for ofc splicing , patch cord sc to sc 5 mtr , ote media converter 1gb , ups 1 kva offline , utp cable cat 6 outdoor , installation

CTN :45719793

13 Jul, 2026 NA

Puruliya - West Bengal

Tender For procurement of spares for cw pumps of unit-6 during overhauling under tm dept.,stps - bearing sleeve for cwpump,model-cw1q,capacity-17500 m3/hbhel-hyderabadrpm-490,continuous duty,mixed flow type,drgno.hy-dg-230-165-0003 rev.-00, cutless rubber lined bearing for cw pump cw1q bhel-hyderabadrpm-490,continuous duty,mixed flow type,drgno.hy-dg-230-165-0003 rev.-00, pump casing wear ring $for cw pump cw1qbhel-hyderabadrpm-490,continuous duty,mixed flow type,drgno.hy-dg-230-165-0003 rev.-00, stuffing box sleeve $for cw pump cw1qbhel-hyderabadrpm-490,continuous duty,mixed flow type,drg no.hy-dg-230-165-0003 rev.-00, impeller shaft assembly for cw pump,mobhel-hyderabadrpm-490,continuous duty,mixed flow type,drgno.hy-dg-230-165-0003 rev.-00, head shaft for cw pump,mo bhel-hyderabadrpm-490,continuous duty,mixed flow type,drgno.hy-dg-230-165-0003 rev.-00

CTN :45716858

07 Jul, 2026 NA

Raigad - Maharashtra

Tender For procuremnt of spares for flowserve make pumps - throttling sleeve, p/n: , 2430,101-pa-2001 , impeller wear , ring, pn:2300.2,101-pa-2001 , impeller wear , ring,pn:2300.1,101-pa-2001 , casing wear , ring, p/n:1500.2,101-pa-2001 , casing wear , ring,p/n:1500.1,101-pa-2001 , bearing isolator, p/n: , 4300.2,101-pa-2001 , bearing isolator, p/n: , 4300.1,101-pa-2001 , gasket (end , cover), p/n:4590,101-pa-2001 , gasket,p/n:4510,101-pa-2001 , throttling , sleeve,p/n:2430,101-pa-3001ab , impeller wear , ring,pn:2300.2,101-pa-3001 , impeller wear , ring,pn:2300.1,101-pa-3001 , casing wear , ring, p/n:1500.2,101-pa-3001 , casing wear , ring,p/n:1500.1,101-pa-3001 , bearing , isolator, p/n:4300.2,101-pa-3001 , bearing , isolator, p/n:4300.1,101-pa-3001 , impeller,p/n:2200,101-pa-3001ab , shaft,p/n:2100,101-pa-3001ab , end cover , gasket,p/n:4590,101-pa-3001ab , gasket,p/n:4510,101-pa-3001ab , impeller, 6hdx19a, 101-pa-3002a/b,pn2200 , bearing , sleeve,p/n:3240.3,101-pa-3002ab , bearing , sleeve,p/n:3240.2,101-pa-3002ab , impeller wear , ring, pn:2300.1,101-pa-3002 , impeller wear , ring,pn:2300.2,101-pa-3002 , casing wear , ring,p/n:1500.1,101-pa-3002 , casing wear , ring,p/n:1500.2,101-pa-3002 , gasket (o , ring), p/n:4610.1,101-pa-3002a/b , bearing , isolator,p/n:4300.4,101-pa-3002 , bearing , isolator,p/n:4300.3,101-pa-3002 , bearing , isolator, p/n:4300.2,101-pa-3002 , bearing , isolator,p/n:4300.1,101-pa-3002 , stuffing box , bushing,pn:4132,101-pa-3002 , gasket (o , ring), p/n:4610.6,101-pa-3002a/b , gasket (o , ring), p/n:4610.5,101-pa-3002a/b , gasket,p/n:4510.3,101-pa-3002a/b , gasket,p/n:4510.2,101-pa-3002a/b , gasket,p/n:4510.1,101-pa-3002a/b , throttling , sleeve,p/n:2430,101-pa-4005ab , impeller wear , ring,pn:2300.2,101-pa-4005 , impeller wear , ring,pn:2300.1,101-pa-4005 , casing wear , ring,p/n:1500.2,101-pa-4005 , casing wear , ring,p/n:1500.1,101-pa-4005 , bearing , isolator, pn:4300.2,101-pa-4005ab , bearing , isolator, pn:4300.1,101-pa-4005ab , gasket, end , cover, 101-pa-4005a/b,pn:4590 , gasket, casing, 101-pa-4005a/b, pn: , 4510 , throttling , sleeve,p/n:2430,101-pa-7001ab , impeller wear , ring,pn:2300.1,101-pa-7001 , impeller wear , ring,pn:2300,101-pa-7001ab , casing wear , ring, p/n: 1500.2,101-pa-7001 , casing wear , ring, p/n:1500.1,101-pa-7001 , gasket, end , cover, 101-pa-7001a/b,pn:4590 , gasket, casing, 101-pa-7001a/b, pn: , 4510 , bearing , isolator, pn:4300.2,101-pa-7001ab , bearing , isolator, pn:4300.1,101-pa-7001ab , throttling , sleeve,p/n:2430,101-pa-7002ab , impeller wear , ring,pn:2300.1,101-pa-7002 , impeller wear , ring,pn:2300, 101-pa-7002ab , casing wear , ring,p/n:1500.2,101-pa-7002 , casing wear , ring,p/n:1500.1,101-pa-7002 , gasket, end cover, 101-pa-7002 , a/b,pn:4590 , bearing , isolator,pn:4300.2,101-pa-7002ab , bearing , isolator, pn:4300.1,101-pa-7002ab , gasket, casing, 101-pa-7002 a/b, , pn:4510 , throttling , sleeve,p/n:2430,101-pa-8002 , impeller wear , ring,pn:2300.2,101-pa-8002 , impeller wear , ring,pn:2300.1,101-pa-8002 , casing wear , ring,p/n:1500.2,101-pa-8002 , casing wear , ring,p/n:1500.1,101-pa-8002 , gasket, end cover, pos no: 4590 , bearing , isolator,pn:4300.2,101-pa-8002 , bearing , isolator.pn:4300.1.101-pa-8002 , gasket, casing, pos no: 4510 , sleeve,p/n:2430,101-ka-7001-pa03 , wear , ring,p/n:2300.1,101-ka-7001-pa03a/b , wear , ring, p/n:2300,101-ka-7001-pa03a/b , wear , ring,p/n:1500.2,101-ka-7001-pa03a/b , wear , ring,p/n:1500.1,101-ka-7001-pa03a/b , gasket, p/n:4610.2,101-ka-7001- , pa03a/b , gasket, p/n:4610.1,101-ka-7001- , pa03a/b , gasket,p/n:4510,101-ka-7001- , pa03a/b , impeller, p/n: 2200 , shaft, p/n:2100 , gasket, p/n: 4510 , gasket, p/n: 4590 , casing wear ring, p/n:1500.1 , casing wear ring, p/n:1500.2 , impeller wear ring, p/n:2300 , impeller wear ring, p/n:2300.1 , throttling sleeve, p/n:2430 , impeller nut, p/n:2912 , bearing nut, p/n:3712 , bearing isolator, p/n:4300.1 , bearing isolator, p/n:4300.2 , lockwasher, p/n:6541 , impeller, p/n:2200,

CTN :45716566

13 Jul, 2026 1.40 Lacs

Kheri - Uttar Pradesh

Tender For supply of spare parts required for batch type centrifugal machine ng1250, nhec make i 1 inch water pneumatic vavle size - 25nb , spare parts required for batch type centrifugal machine ng-1250, nhec make i 1 inch water pneumatic valve spares make kushako, size 25nb , spare parts required for batch type centrifugal machine ng1250, nhec make i 1 inch water pneumatic valve spares make kushako, size 25nb, seal kit , spare parts required for batch type centrifugal machine ng-1250, nhec make i 1 inch water pneumatic valve spares make kushako, size 25nb, spring , batch type centrifugal machine spare parts ng1250 cf machine bearing sleeve with wedge type ring and with chucknut for batch type centrifugal machine ng1250, nhec mak , batch type centrifugal machine spare parts ng1250 cf machine wedge type ring taper one for a centrifugal machine ng1250, nhec make , spare parts for batch type centrifugl machine kb1750, thyssen krupp make poppet type pilot operated solenoid valve, make kushakorotex i 4 way double action solenoid valve , spare parts for batch type centrifugl machine kb1750, thyssen krupp make poppet type pilot operated solenoid valve, make kushakorotex i 3 upon 2 way single action solenoid valve. , spare parts for batch type centrifugl machine kb1750, thyssen krupp make bottom valve main discharge cylinder complete. heramb udyog make, model hubdvc rd 68

CTN :45704158

11 Jul, 2026 2.65 Lacs

Baghpat - Uttar Pradesh

Tender For supply of centrifugal machine spares c c - valve , cir clip , lubricator , tension set , rubber o ring , regulator , tension ring , rubber sheet , seal kit , bottom cone , pu star coupling , o ring for , s.s. kilit for , u coupling tyre , rubber buffer , solenoide valve , brass plate , pu rubber star , ss bearing sleeve , s.s. nozzle round , s.s. socket size , ss elbow size , scrapper with , screw size , rubber for , ss clip width , ss clamp width * /bid number : gem/2026/b/7714650 + /dated: 26-06-2026 ' ' / bid document 1 / 30

CTN :45478137

01 Jul, 2026 NA

Vidisha - Madhya Pradesh

Tender For corrigendum : items - computer and servises and otheres, mcb (miniature circuit breaker), acb (3200a/4000a ), acb (air circuit breaker), allen key set, amf relay, ammeter, annunciation system, anti-corrosion spray, arc flash suit, arc flash suit (ht/lt panel ), auxiliary contacts, avr (automatic voltage regulator), battery charger, blower/air blower, breather assembly, bus coupler acb, busbar insulators, busbar supports, cable glands, cable glands, cable lugs, cable ties, cable ties, changeover switch, clamp meter, clamp meter, combination pliers, consumables, contact cleaner spray, contactor, continuity tester, control cable, control fuses, control relay, control wires, cooling fan, copper busbar, crimping tool, ct (current transformer), current transformer (ct), dg set synchronization panel (3 750 kva), digital multimeter, digital multimeter, discharge rod, earth fault relay, earth switch, earth tester, earthing rod, electrical contact cleaner, electrical gloves (11 kv rating), electrical safety gloves, emergency stop switch, energy meter, engine control module, face shield, ferrules, ferrules, flexible wire, frequency meter, fuse fuse base, heat shrink sleeves, heat shrink tubes, hrc fuse, hrc fuses, ht protection relay, indicator lamps (r/y/b), infrared thermometer / thermal camera, insulated screwdriver, insulation tape, isolator switch, lightning arrester, load sharing module, lockout-tagout (loto) kit, loto kit, lt pcc/mdb panel, lubricant spray ( ), lugs, maintenance tools, mccb, mccb (molded case circuit breaker), megger (insulation tester), megger 5 kv, microfiber cloth, motorized mechanism, multifunction meter, multifunction meter, nose pliers, numerical protection relay, oti (oil temperature indicator), over current relay, overload relay (olr), phase sequence meter, phase sequence tester, plc module, power analyzer, power cable, power factor meter, protection & metering, pt/vt (potential transformer), push buttons (start/stop), pvc insulation tape, reverse power relay, rust remover, safety equipment, safety goggles, safety helmet, safety helmet, safety shoes, safety shoes, screwdriver set, secondary injection test kit, selector switch, shunt trip coil, side cutter, silica gel, smps (power supply), soft brush, spanner set, speed governor module, spiral wrapping, spring charging motor, starting relay, synchronizing relay, terminal blocks, thermal camera, thermostat, timer relay, torque wrench, transformer buchholz relay, transformer oil, under/over frequency relay, under/over voltage relay, uv coil, vacuum cleaner, vcb (vacuum circuit breaker), voltage tester, voltmeter, wire markers, wire stripper, wti (winding temperature indicator), , , , comprehensive maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor & majour spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete., annual maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete.

CTN :45712821

14 Jul, 2026 5.13 Lacs

Saharanpur - Uttar Pradesh

Tender For supply of hardware items - holtite 1 2 kg , restoline 1 2 kg , brasso 500ml , araldite 1 800kg , borex powder 1 kg , plastic rope 3 4 inch , plastic rope 3 8 inch , teflon tape 3 4 inch , dunlop make rubber hose pipe of size 3 4 inch size , dunlop make rubber hose pipe of size 1 inch size , graphites powder , guage glass 7 h make klinger , guage glass a 9 make klinger , black rubber sheet joyti 1 8 inch , black rubber sheet joyti 1 4 inch , white grade no 1 cotton waste , color grade no 1 cotton waste , blue tube of 20 ml , emery cloth fine 120 grit per rim , emery cloth rough 40 grit , emery tape size 2 inch x 50 mtr grit 120 , emery paste rough 400gm , emery paste fine , spilit pin all size champion make as per list as per ppl , gm wheel valve 1 2 inch make sant , gm wheel valve 3 4 inch make sant , gm wheel valve 1 inch make sant , gm wheel valve 1 1 2 inch make sant , gm wheel valve flange type 1 inch make sant , gm right angle valve 15 mm make sant , ss needle valve 10 mm tested at 10 kg cm2 with test certificate , ss needle valve 15 mm tested at 10 kg cm2 with test certificate , ss needle valve 20 mm tested at 10 kg cm2 with test certificate , stag b red type , m seal , alluminium rivit size 1 4 inch x1inch , locktite no 641 in 50 ml , steel wire rope siling as per drg 1 inchx7 mtr load approx 12 tone capacity , steel wire rope siling as per drg 1 inchx6 point 7 mtr load approx 12 tone capacity , steel wire rope siling as per drg 1 2 inchx3 point 5 mtr , steel wire rope siling as per drg 1 inchx1 5 mtr , simplex chain 1 inch pitch diamond make , wire braided rubber hose pipe size 1 inch suitable for 150deg , wire braided flexible rubber hose pipe heavy duty temp cf machine 1 4 inch x 1 5 mtr , wire braided flexible rubber hose pipe heavy duty temp cf machine 3 8 inch x 1 5 mtr , wire braided flexible rubber hose pipe heavy duty temp cf machine 1 2 inch x 1 5 mtr , wire braided flexible rubber hose pipe heavy duty temp cf machine 3 4 inch x 2 mtr , wire braided flexible rubber hose pipe heavy duty temp cf machine 2 1 2 inch x 12 inch , break lininer size 1 2 inchx 12 inch width , steel wire rope 3 4 inch usha martin make construction 6 36 with test certificate , simplex chain 2 poin 1 2 inch pitch diamond make , glass toughened sight glass size 100mmx15mm , glass toughened sight glass size 250mm x 16mm , glass toughened sight glass size 220mm x 16mm , glass toughened sight glass size 210mm x 16mm , glass toughened sight glass size 200mm x 16mm , glass toughened sight glass size 180mm x 16mm , glass toughened sight glass size 160mm x 16mm , glass toughened sight glass size 125mm x 12mm , bearing sleeve h 207 make jmc , bearing sleeve h 209 make jmc , bearing sleeve h 213 make jmc , bearing sleeve h 307 make jmc , bearing sleeve h 313 make jmc , bearing sleeve h 312 make jmc , bearing sleeve h 315 make jmc , bearing sleeve h 317 make jmc , bearing sleeve h 318 make jmc , bearing sleeve h 322 make jmc , bearing sleeve h 2318 make jmc , bearing sleeve h 3134 make jmc , marking cloth , clean old cloth dhoti

CTN :45713144

07 Jul, 2026 NA

Amritsar - Punjab

Tender For supply of steering universal joint , tapper roller bearing , sleeve cyl assy , bendix drive , bty switch , hux nut

Bearing Sleeve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector