Latest bearing spacer Tenders | Government bearing spacer Tenders

State Government

CTN :41300872

08 Aug, 2025 1.00 Lacs

Kota - Rajasthan

Tender For ball bearing confirmaing to is 6455-1972 (or amended upto date) size-6204z for india mark ii hand pump at divisional store ddr kota

Central Government/Public Sector

CTN :41296172

26 Aug, 2025 NA

Dhanbad - Jharkhand

Tender For supply of single row deep groove ball bearing no. 6312 with c3 clearance. size - 130x 60 x 31 mm. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41309013

12 Aug, 2025 NA

Chennai - Tamil Nadu

Tender For supply of single row deep groove ball bearing skf no.6306 2z/ c3 (side plate at both sides for tran sformer blower motor) (od:72mm ,id:30mm ,width:19mm ) or equivalent only from rdso approved make s for emu application. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41309398

22 Aug, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of single row deep groove ball bearing equivalent to 6204 zz of skf make. accepted makes : skf, fag, nsk. [ warranty period: 30 months aft er the date of delivery ]

Central Government/Public Sector

CTN :41288615

22 Aug, 2025 NA

Mumbai - Maharashtra

Tender For supply of six thousand hourly routine kit spares for diesel alternator e e - plug injector orifice , plug ball , gasket sea water pump , washer lock , washer plain , plug pipe , washer , draincock , ball check , screen filter , valve shutoff , seal water pump , seal rectangular ring , gasket governor housing , bearing ball , seal tamper proof seal wire , hub jaw coupling , shaft fuel pump drive , disc actuator , tee female pipe , screw hexagon head cap , nipple plain pipe , fitting grease , sleeve wear , bearing roller , knob for shut off valve hs , key plain woodruff , gasket water , bushing , nut lock , shaft idler , screw captive washer cap , seal keyway , seal o ring , elbow male union pt pump elbow male union , clamp v band , clamp t bolt , clamp tee bolt , cap dust , kit, 4l turbo repair , screw socket head cap , disc valve , pack idle spring , actuator etr fuel control , housing filter , plug threaded , hose plain , connector male , belt v , gasket flange , cap filter pt fuel pump ) /bid number : gem/2025/b/6469346 * /dated: 01-08-2025 & & / bid document 1 / 43

Central Government/Public Sector

CTN :39986123

04 Aug, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For bid to ras supply of skf 6202 bearing or equivalent gf035 rev00 , ball bearing 6204 gf036 rev00 , skf yel 209 bearing or equivalent gf068 rev03 , skf 6207z bearing or equivalent gf047 rev01 , bearing 6009z gf034 rev01 , ball bearing skf 6211 or equivalent gf059 rev01 , skf 6212z bearing or equivalent gf060 rev02 a

State Government

CTN :41285886

11 Aug, 2025 NA

Kangra - Himachal Pradesh

Tender For repair and maintenance of lwss chatta thehar under section dhameta (sh:-repair of 12.5hp induction motor and ball bearing star coupling and repair of starter) set no.1

Central Government/Public Sector

CTN :41288351

11 Aug, 2025 14.54 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of key, part no. shs6532320 , key, part no. shs6532321 , hex lock nut, part no. shs6532336 , bearing bush, part no. shs6532352 , helicoil lock insert, part no. shs6532479 , pump casing, part no. shs6532107 , impeller, part no. shs6532151 , pump shaft, part no. shs6532180 , casing ring, part no. shs6532190 , thrust bearing carrier, part no. shs6532247 , thrust bearing adopter, part no. shs6532272 , screw for impeller, part no. shs6532669 , gunmetal bush 100 mm x 70 mm, part no. shs6532353 , casing cover, part no. shs6532220 , column pipe, part no. shs6532132 , motor stool, part no. shs6532290 , bearing cover foor impeller shaft brg, part no. shs6532271 , thrust ball bearing, part no. shs6532262 , bend, part no. shs6532280 , gasket for casing, part no. shs6532511

Central Government/Public Sector

CTN :41290895

22 Aug, 2025 NA

Koraput - Odisha

Tender For supply of spares of jumbo platform trucks d d - 52-7041-brass-nut-and-bolt , 52-10964-main-moving- cont-assy , 52-638-copper-tips , 52-35182-insulater- tube , 52-7042-insulating-bushing , 52-30835-base- plate , 52-640-no-fix-contact , 52-634-no-open- moviong-contact , 52-30838-pin-with-cup-washer , 52-10030-compression-spring , 52-10031-tension- spring , 52-637-contact-holder , 52-10033-tension- spring , 52-35186-insulating-strip , 52-639-contact- brazed , 52-10034-brass-strip , 52-629-contact- brazed , 52-10035-fuse , 52-646-horn , 52-30827- aresistance-small , 52-645-reverse-forward-switch , 52-27354-no-contactor , 52-25277-speed- controller , 52-7043-copper-lugs , 52-30843-copper- lugs , 52-644-ignition-switch , 52-10036-horn-push- button , 52-21844-gasket-inspection , 52-98791- gasket-inspection , 52-672-ball-bearing , 52-98778- dust-cover , 52-673-thrust-bearing , 52-750-seal- washer , 52-751-oil-seal , 52-10037-roller-bearing , 52-10038-ball-bearing , 52-10039-thrust-bearing , 52- 10040-ball-bearing , 52-10041-ball-bearing , 52-10044- steering-coller

Corporations And Associations And Others

CTN :41289329

13 Aug, 2025 88.02 Lacs

Delhi - Delhi

Tender For supply and installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi and chandni chowk for various locations of parks in municipal corporationof delhi - supply & installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi & chandni chowk for various locations of parks in municipal corporationof delhi, supply and fixing of four seated merry go round. area: 1.5 m. height 0.8 m. seat moulded f.r.p. main frame: 40 nb g.i. pipe. bearing : heavy duty bearing. ms plate: 250x10mm. support pipe- 80nb. the topcoat is duly powder coated. the item shall be having its main frame made up of 25 & 40. mm nb b class g.i. pipe. the stand shall be made in 80 mm nb b class g.i. pipe. the whole structure shall be mounted on heavy duty bearing shaft. the bearing used shall be of heavy duty bearing permanently lubricated with water sealant. the seat frame shall be made out of frp (fibre reinforced plastic)/lldpe (low linear density ploy ethylene). the seats shall have handrails so that the child does not fall. it shall accommodate 4 children at a time. the powder coating shall be done on the pipes to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of arch swing. leg support : 80 mm nb pipe, seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 3.0 m x 2.5 m. height : 2.5 m. top bar : 60 mm nb pipe. suspension : 6 mm rubber coated chain. the topcoat is duly powder coated. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat / u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chairn. the bail bearings shall be mounted inside a specially designed nylon clamp. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gi chain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat

Bearing Spacer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors