Web Analytics Made Easy - StatCounter

Bearing Washer Tenders

Get complete information related to latest Bearing Washer Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Bearing Washer Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Bearing Washer Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government And Public Sector

CTN :41290716 Due date: 13 Aug, 202513 Aug, 2025 NA
Tender For supply of spares for turbine moisture separator drain pump - impeller wear ring part no-025.1 , impeller wear ring part no-025.2 , distance piece part no-045 , impeller nut part no-048.1 , oil flinger part no-068 , throat bush part no-082 , o ring-st. box part no- 115.3 , o ring-st. box part no- 115.4 , o ring jacket cover part no-115.5 , o ring jacket cover part no-115.6 , gasket-casing part no- 117.1 , stud with nut casing part no-120.01 , stud with nut-gland plate part no-120.06 , stud with nut-brg. housing part no-120.07 , hex. bolt brg. cover d. e. part no-120.08 , hex. bolt brg. cover n. d. e. part no-120.09 , hex. bolt stay part no- 120.13 , set screw imp. wera ring part no-120.16 , set screw case wera ring part no-120.17 , hex. socketed cap screw impeller nut part no-120.18 , hex. socketed cap screw part no-120.19 , set screw throat bush part no- 120.21 , set screw oil flinger part no-120.27 , bearing lock nut part no- 129 , bearing washer part no- 136 , magnetic drain plug part no-193.3 , constant level oiler part no-256 , air breather part no-285 , gasket with center ring part no- 117.17 , gasket with center ring part no-117.20 , gasket with center ring part no-117.22 , gasket with center ring part no-117.23

CTN :41305113 Due date: 12 Aug, 202512 Aug, 2025 NA
Tender For supply of tapper roller bearing 580572 , engine speed sensor , seating block , distance piece , wiper arm assy , wiper timer 24 v , link rod , fuel pump , pilot bearing

CTN :41305044 Due date: 16 Aug, 202516 Aug, 2025 1.81 Lacs
Tender For supply of 89931 fuel return pipe , 89934 delivery pipe kigass , 2523058 2d fuel filter , 1111003 set screw , 1018310 plain washer , 1018305 plain washer , 2523138 fuel pipe filter to engine , 2523921 gear selector forks and shaft , 89933 suction pipe kigass , 2524729 fuel pipe tank to lift pump , 2523137 fuel pipe lift pump to filter , 89451 a inlet pipe , 89452 a outlet pipe , 1031703 jubilee clip , 12354 engine oil filter , rr1004 plate driving , rra1003a clutch unit complete mkii , 88775 second speed wheel , 2523917 fixed shaft assy. , 88757 bevel wheel , 88758 bearing housing , 88759 cover for housing , 88767 sleeve , 1040218 ball bearing , 88769 locking screw , 88768 nut , 1012909 distance piece , rr1293 4 oil seal , 1110108 nyloc nut , 1013979 split pin , 2523920 clutch shaft assy complete , nk clutch fork assy complete

Central Government And Public Sector

CTN :41281277 Due date: 14 Aug, 202514 Aug, 2025 NA
Tender For supply of spares for asw system self cleaning strainers e e - shaft sleeve with o ring , rear end bearing , front end bearing , worm planetary gear box , u-seal , shaft seal , control drain o ring , screen basket assembly , basket bearing , shaft , drive shaft o-ring , turn buckle assembly for outlet pipe , extraction arm , spool piece , control drain pipeline , spool piece connected between gear sealing assembly , debris outlet support tee plate , frm motor mounting frame with scs body , elbow connected with tie rods , gear sealing support tee plate , seal kit , soft plastic , dowel pin for sleeve-pin 12 x 40 lg , dowel pin for sleeve-pin 10 x 40 lg , screen basket bearing screw , sleeve with drum head bolt , intermediate flange stud , elbow to ddmv flange stud , front bearing screw , collection arm with spool pipe bolt , outlet disc to spool piece screw , debris discharge bearing nut , debris discharge bearing stud , m12 nut part no-21850 , gear sealing dummy bolt , rear bearing screw , sleeve center bolt , m12 nut part no-21329 , m10 nut part no-21342 , drive shaft flange nut , drive shaft flange stud , collection arm with spool piece nut , worm gear box to intermediate flange bolt , front bearing bolt , outlet disc mounting screw , control drain flange bolt , nut m20 , gear sealing drum mounting stud , gear sealing drum mounting nut , bolt-m8 x 15 , hex. socket grub screw , hex. socket cs screw , turn buckle upper and lower nut , bolt-m16 x 40 , nut-m16 , hex. soc. head cap screw- m6 , bolt-m20 x 45lg , turn buckle upper and lower stud

Central Government/Public Sector

CTN :41273837 Due date: 11 Aug, 202511 Aug, 2025 NA
Tender For supply of spares of air compressor - kit gasket or sealliing rr80 or lg3d 26 items part no 072403309 , valve plug disc must change rr80 part no 070301930 , valve plug suc must change rr80 part no 070301940 , intake air filter part no 070305120 , bearing conrod upper rr53100 part no 070302180 , bearing conrod upper rr53100 part no 070302150 , needle roller brg.ikobr283720 part no 000903904 , valve assy inlet 3cdb or 3uc or 4uc part no a070072 , valve assy inlet 3cdb or 3uc or 4uc part no a070071 , valve assy suction unloader m expr part no a070073 , obs piston rings dia 197 part no 022401079 , obs piston rings dia 140 part no 072403489 , gasket opi 6cd4uc or 3uc lg3cdb part no 000447810 , cu washer sul or dv rr53100 part no 070402520 , diaphram plate assy brather part no 070403030 , element filter outer 6cd3uc ug part no 070306910 , element filter inner 6cd3uc ug part no 070306920 , piston and gp dia 140 part no 000477810 , piston and gp dia 197 6cd4uc or 3uc part no 000477830 , circlip int b45 part no 000917245 , cyl dia 197 must change 6cd 3uc ug part no 070304780 , cyl dia 140 must change 6cd 3uc ug part no 070304780 , safety valve 1 by 2 bsp 010 part no 000325520 , element intake filter part no 000325520 , key bg 6cd4uc or 3uc lg3cdb part no 000448050 , pump assy with gear lop3cdb part no 07030011a , valve assly oilrelief rr80101 part no a070551 , valve assembly braether part no a070074 , valve assembly oil realf part no a070034 , strainer b coarse 6cd4uc or 3uc part no 00044726a , valve assembly safety 1 by 2 npt expr part no lg3cdb part no a070026 , driven gear with locking piece lg3cdb part no 070300510 , driven gear driven sprocket lg3cdb part no 070300500 , fourway connector inner thread type lg3cdb part no 070305690 , kit gasket and sealliing par 4uc consisting of 24 items refer section 5 of tender document part no 072403339 , obs piston ring dia 197 part no 022401079 , obs piston ring dia 108 part no 072403469 , valve assembly inlet part no a070072 , valve assembly suction unloader part no a070073 , valve assembly discharge part no a070071 , piston with gudgeon pin dia 197 part no 000477830 , piston with g pindia 108 part no 000477790 , cylinder dia 108 hp part no 000216390 , element air intake part no 000325520 , circlip internal part no 000917245 , cylinder dia 197 lp and exhauster part no 000216410 , plug 1 by 4 inch npt part no 000448000 , plug 1 inch unf part no 000455130 , pin steaty part no 000447480 , drainpipe part no 000447520 , elbow 1 inch npt part no 000447530 , drain plug assy 1 inch npt 000463080 part no a070057 , key bg part no 000448050 , valve assly oil relief part no a070034 , connecting rod with cap and bush part no 070300940 , three way connector part no 000321660 , t connector part no 000448360 , l connector part no 000448370 , safety valve assembly part no b012800170007 , seal and mating ring assembly 6cd4uc or lg2cdb part no 000470300 , safety valve assy 3 by 4 bsp 18 ksc part no lg2cdb part no a020007

Central Government/Public Sector

CTN :41280654 Due date: 21 Aug, 202521 Aug, 2025 NA
Tender For supply of bearing piece assembly for uncoupling gear arrangement of wagons to rdso drg. no. wd-0 0046-s-1, alt.-7, item 4, 5, 6 & 7. material conforming to is:2062-2011, reafirmed-2021, grade- e250 a. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :41284399 Due date: 11 Aug, 202511 Aug, 2025 3.50 Lacs
Tender For as per aap alocation ( id - 110625976) - weight washer, plunger, mark 2 chain, axel, nut & bolt, bearing, top cap, head of mark2 tubewell, adopter, hendle, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) i)15 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)20 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)25 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)32 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)40 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)100 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) vii)redusing soket 100 x 40, supplying pvc strainer of approved make with adapter conforming to i.s.12818 specifications.(p-52,item-06) i) 40 mm, supplying pvc strainer of approved make with adapter conforming to i.s.12818 specifications.(p-52,item-06) i) 80 mm, supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(p-53,item-09) i) 40 mm, supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(p-53,item-09) ii) 75 mm, supplying, fitting and fixing 65 mm dia. deep well brass cylinder with necessary fittings and accessories.(p-54,item-15), supplying, fitting and fixing 15 mm dia. galv. m.s. connecting rod with sockets.(p-54,item-16), packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the engineer-incharge including cost of all materials labour and equipment complete.(note: initial 6 m. of annular space between the housing pipe and the bore should not be shrouded with pea size gravel to avoid contamination with surface water.)(p-55,item-24), taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (a) upto 20 metre below g.l. (i) 40 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (a) upto 20 metre below g.l. (ii) 80 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (a) upto 20 metre below g.l. (iii) 100 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (b) beyond 20 metre below g.l. (i) 40 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (b) beyond 20 metre below g.l. (ii) 80 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (b) beyond 20 metre below g.l. (iii) 100 mm dia., supplying, fitting and fixing brass cylinder parts. (i) brass plunger complete, supplying, fitting and fixing brass cylinder parts. (ii) brass plunger complete without g.i. rod, supplying, fitting and fixing brass cylinder parts. (iii) c.i. top socket, supplying, fitting and fixing brass cylinder parts. (iv) c.i. bottom socket, supplying, fittin

State Government

CTN :41216984 Due date: 08 Aug, 202508 Aug, 2025 NA
Tender For supply delivery of some spare parts required for regular repairing overhauling of chlorine machines in khanakul i and ii block at different w/s scheme dist hooghly under electrical division phe dte - supply & delivery of following materials (total pump house- 102 nos). from 01/09/2025 to 31/07/2026., 15 mm dia flexible pvc pipe for supply chlorine solution.(approved make), 15mm dia upvc pipe made to astm d-1785, schedule 40(light) duty [make: suprem/oriplast / ashirvad/any approved], g.i. short piece of tata make (above 50mm & upto 150 mm ong), 15 mm dia gi elbow, 15 mm dia tail piece, 15 mm dia powder coated metal clamp, 15 mm dia fabt (upvc), 15 mm dia union (g.i.), 15 mm dia tee (upvc), 15 mm dia long screw (g.i.), 15 mm dia iron jam nut (g.i.), 15 mm dia nrv (approved make), coupling rubber, diaphragm, pinion, bearing (skf), oil ring (approved make), oil chamber nut (approved make), ball set (approved make), 15 mm dia pvc ball valve, mobil mak gold (make - castrol), 15 mm upvc tank nipple (make- ashirbad/ supreme/approved make), 100 ltr. capacity pvc tank for chlorine solution (make: sintex/patton), 16 amp triple pole main switch, 415v ac, 50hz with neutral link. [make: havells/siemens/standard], direct online starter, 415v, 50hz, 3ph, relay range (1-1.6 amp).[make: l&t (model-mk1) / siemens ], eceentric strap, eceentric, 1.5 sq. mm flexible copper wire fr pvc insulated 1.1 kv grade, is 694 [make- finolex / havells/equivelent], labour charges for dismatling and refitting after repairing the chlorine machine set from existing position including fitting fixing the above [sl.no.- 1(a to ab)] by dismantling the old one including supplying necessary materials as required including testing commissioning all complete as per direction of eic. for the 102 nos. sites of hooghly., carrying of burnt out 0.5 hp chlorine motor form w/s scheme to nearest work shop for repairing., rewinding of 0.5 hp chlorine motor with suitable size copper wire including heat varnish and all complete as per direction., carrying of repaired 0.5 hp chlorine motor form work shop to following w/s scheme, p.h., add: 18% gst, add: 1% cess

State Government

CTN :41216990 Due date: 08 Aug, 202508 Aug, 2025 NA
Tender For supply delivery of some spare parts required for regular repairing overhauling of chlorine machines in arambag goghat i and ii haripal sankrail blocks at different w/s scheme dist hooghly and howrah under electrical division phe dte - supply & delivery of following materials ( total pump house-102 nos). from 01/09/2025 to 28/02/2026., 15 mm dia flexible pvc pipe for supply chlorine solution. (approved make), 15mm dia upvc pipe made to astm - d - 1785, schedule 40 (light) duty [make : suprem/oriplast / ashirvad/any approved], g.i. short piece of tata make (above 50mm & upto150 mm long), 15 mm dia gi elbow, 15 mm dia tail piece, 15 mm dia powder coated metal clamp, 15 mm dia fabt (upvc), 15 mm dia union (g.i.), 15 mm dia tee (upvc), 15 mm dia long screw (g.i.), 15 mm dia iron jam nut (g.i.), 15 mm dia nrv (approved make), coupling rubber, diaphragm, pinion, bearing (skf), oil ring (approved make), oil chamber nut (approved make), ball set (approved make), 15 mm dia pvc ball valve, mobil mak gold (make - castrol), 15 mm upvc tank nipple (make- ashirbad/ supreme/ approved make), 100 ltr. capacity pvc tank for chlorine solution (make : sintex / patton), 16 amp triple pole main switch, 415v ac, 50hz with neutral link. [ make: havells/ siemens/standard ], direct online starter, 415v, 50hz, 3ph, relay range (1-1.6 amp). [ make: l&t (model-mk1) / siemens ], eceentric strap, eceentric, 1.5 sq. mm flexible copper wire fr pvc insulated 1.1 kv grade, is 694 [make- finolex / havells / equivelent], labour charges for dismatling and refitting after repairing the chlorine machine set from existing position including fitting fixing the above [sl.no.- 1(a to ab)] by dismantling the old one including supplying necessary materials as required including testing commissioning all complete as per direction of eic. for the 102 nos. sites of hooghly., carrying of burnt out 0.5 hp chlorine motor form w/s scheme to nearest work shop for repairing., rewinding of 0.5 hp chlorine motor with suitable size copper wire including heat varnish and all complete as per direction., carrying of repaired 0.5 hp chlorine motor form work shop to following w/s scheme, p.h., add: 18% gst, add: 1% cess

State Government

CTN :41189579 Due date: 12 Aug, 202512 Aug, 2025 8.09 Lacs
Tender For maintenance of mi scheme under belbari rd block during the year 2025-26/sh_ - repair _ maintenance of pump-motor, suction-delivery _ electrical accessories etc. (job no. tr/34/minor works/wrd-i/2025-26) - dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the engineer-in-charge.i) for li, supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6306 ball bearing (tata /skf), providing & fitting fixing shaft sleeve bush of approved quality.i) for li (cast iron), providing & fitting fixing shaft sleeve nut of approved quality.i) cast iron (ci), providing & fitting fixing c.i. gland of approved quality.i) for li, providing & fitting fixing c.i coupling complete with nuts & bolts of approved quality.i) 150 mm dia, providing & fitting fixing coupling nuts & bolts (all size)of approved quality.i) for li, providing & fitting fixing coupling rubber bush (all size)of approved quality. i) for li, providing & fitting fixing coupling star bush (all size) of approved quality.i) 150 mm dia, providing & fitting fixing pump shaft of approved quality., supplying and fitting fixing of asbestos rope of best quality as per direciton of engineer-in-charge. i) 6mm to 8mm thick, ii) 10 to 12 mm thick, providing & fitting fixing casing ring of approved quality.i) 150 mm dia (10 mm thick), supplying and fitting fixing of pump cooling pipe of best quality as per direciton of engineer-in-charge., providing & fitting fixing lantern ring for pump of approved quality., supplying and greasing/applying of grease of approved quality as per direction of engineer-in-charge., providing and fixing g.i. bend /elbow in the pipe line including testing of joints complete as per cpwd specification and direction of the engineer - in - charge. a) 150 mm dia, providing & fitting fixing shaft sleeve nut of approved quality. (cast iron), providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer-in- charge.i) 150 mm dia, providing & fitting fixing gland nut / stag nut 100 mm long for gland of approved quality.i) for li, providing and fitting fixing m.s. clamp for hose pipes with nuts & bolts complete as per relevant is specification anddirection of engineer-in-charge.i) 150mm dia, providing & fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.i)150 mm dia, providing and fitting fixing ms foot valve as per relevant is specification and the direction of the engineer-in-charge.. i) 150 mm dia, providing & fitting fixing c.i tail piece of approved quality at site of work.i) 150 mm dia, providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.i) 150 mm dia, providing & fitting fixing c.i foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) c.i foot valve weight, b) c.i foot valve ring, c) c.i foot valve net, dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge., supplying & fitting fixing of spare parts for 20/25 hp horizontal motor.a) motor fan, b) terminal plate, providing and fitting fixing of fully automatic star delta type motor starter ( 3 ph. 50 hz, 415v, 25hp /18.50 kw relay range within 17-25 ) in steel sheet enclosures with contractors and timer etc. complete suitable for motor pump havells/l & t/bch make direction of the engineer-in-charge.i) 25hp/18.5kw relay range within 13-21 +10%, providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses). triple pole with neutral link ( tpn ) , 415/500 volt complete as per direction of the engi
 Loading, Please wait...

Connect us via What's Up