Latest bed side locker Tenders | Government bed side locker Tenders

corporations/Associations/Others

CTN :45723624

02 Jul, 2026 6.00 Lacs

Salem - Tamil Nadu

Tender For supply delivery and fixing of motor and accessories at ward-1 selliyampalayam oht in narasingapuram municipality - supply and delivery of kirloskar make 15hp/11kw/2900rpm three phase/415v/50hz/ac/tefc horizontal centrifugal monoblock pump impeller-mechanical seal (head-20mtr,flow rate-2154lpm) size:100x100mm (local quotation) 15hp horizontal centrifugal monoblock pump, labour charges for erection of horizontal shaft, centrifugal pumpset (coupled/monoblock) in bore well/open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of tpic switches starter, voltmeter, ammeter, capacitor single phasing preventor and laying and jointing the cables and twinearthing as per ie rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by eb authorities., three phase panel board star- delta with two level guard and auto start supply and delivery of star-delta starter confirming to is 13947, iec60947-1 and as amended thereafter with suitable kw rating for operation in ac/ three phase/50hz (+/- 5%) and 415v (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., ct operated ammeter (65 mm dia) with suppressed scale,voltmeter (65mm dia),voltmeter selector switch,miniature circuit breaker, thermal overload relay, air break contactors suitable for next standard higher kw rating, single phasing preventor, dry running preventor and on/off push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capa citor is to be taken separately). three phase panel board for 15hp, supply,delivery and fixing of the following materials are listed below etc..,as directed by the departmental ofiicers.for service4 core 16sq.mm pvc copper ug cable, for motor3 core 6sq.mm pvc insulated and sheathed flat type copper cable, 150mm di pipe, 100mm gi pipe , 100mm gi flange set, rubber sheet for flange set, ms bolt and nut20mm dia and above x 90mm to120mm length fully threaded bolts andwith nuts 2 nos. , manhole cover 60 x 60cm (heavy duty) with frame, supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary ms flange of table e , gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the departmental officers. 150mm sluice valve, 100amps 4pole mcb, 100amps porcelain fuse unit (500v), 32mm pipe

CTN :45740202

13 Jul, 2026 NA

Delhi - Delhi

Tender For customised patient bed side locker size 5x1.5x1.5 ft (hxwxd)

CTN :45281937

02 Jul, 2026 41.99 Lacs

Imphal - Manipur

Tender For bid to ras supply of living shelter ojl shelter part , living shelter ojl constr mtrl , single sleeping bunk , bed side locker , writing table , chair writing , chair easy , peg table , water dispenser , hand held fire extinguisher , interlocking paver blocks for pathway

CTN :45722442

13 Jul, 2026 NA

Betul - Madhya Pradesh

Tender For supply of steel almirah / cabinets (v4) (q2) , chair for general purpose (q2) , revolving chair (v5) (q2) , computer table (v3) (q2) , sofa (v3) (q2) , bunk beds conforming to is 17636 (q2) , steel bookcases conforming to is 7761 (v2) (q2) , centre table , steel table , table steel , executive table , bed side locker

State Government

CTN :45705845

30 Jun, 2026 NA

Pinjore - Haryana

Tender For cc interlocking paver blocks providing and laying 80mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. , maintenance of roads removal of existing ipb by manual means and disposal of dismantled material with all lead and lift as per technical specification clause 202.3. ,maintenance of roads relaying of available (removed and stacked) interlocking paver block pavement having thickness 100mm/80 mm/ 60 mm (average = 80mm) as per drawings and technical specification clause 1504 , excavating trenches of required width and depth for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m. 1.2. all kind of soil pipes, cables etc, exceeding 80 mm dia but not exceeding 300 mm dia ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 1. nominal concrete 1:1.5:3 or richer mix (i/c equivalent design mix) cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size)

State Government

CTN :45705899

30 Jun, 2026 NA

Hansi - Haryana

Tender For cc interlocking paver blocks providing and laying 80mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge., maintenance of roads removal of existing ipb by manual means and disposal of dismantled material with all lead and lift as per technical specification clause 202.3. ,b laying of ac / pvc pipes and specials stringing out a.c./p.v.c pipes and specials casting along trenches and laying the same in trenches, to correct alignment and gradients including cartage from divisional stores or nearest railway station to site of works and return of pieces of pipes to stores. 3. 100 mm internal diameter of pipe line laid complete,earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by engineer-in-charge. 1. all kinds of soi

State Government

CTN :45704964

30 Jun, 2026 NA

Ambala - Haryana

Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-7 grade sands pipes as per is:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. , earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

CTN :45368784

06 Jul, 2026 NA

Haridwar - Uttarakhand

Tender For corrigendum : empanelment of vendors to provide furniture items on rental basis during the kumbh 2027-haridwar - almirah steel almirah: 4 sections: 6x3, almirahsteel almirah: 3 sections: 4x3, almirah hanging almirah: 6x3, almirah small steel almirah 4x2.5, bed single bed: folding, steel frame, plastic newad knit: 6x3, bed dewan bed simple with mattress 3-4" thick, bed dewan bed box type with mattress 3-4" thick, bed double bed sunmica top including mattress 3-4" thick, bed single bed sunmica top including mattress 3-4" thick, bedsheet colorful/white/printed bedsheet single bed, bedsheet colorful/white/printed bedsheet double bed, bench bench with arm rest steel frame with wooden seat and back, bench wooden bench with armrest 3 seater, bin dustbin for rooms small 5-10 ltr, bin dustbin big for waiting room10-50 ltr, blanket cotton blanket 250 gsm, blanket blanket 500 gsm single bed, blanket blanket 500 gsm double bed, blanket blanket 300 gsm single bed, blanket blanket 300 gsm double bed, busket balti/bucket 20 ltr, cash box iron/aluminium cashbox, chair plastic chair: moulded, with armrest, chair steel chair: padded back and seat, with armrest, chair steel chair: padded back and seat, without armrest, chair revolving chair (basic): padded back and seat, with armrest, chair revolving chair (executive): padded back and seat, with armrest, chair presidential chair: for vips seated on stages, chair office chair with arm rest, chair chair- folding , steel/wooden, cover table cloth, cover chair cover, cover sofa cover, curtain plastic sheet curtain to prevent dust to enter areas with installation (different sizes), display display board 10x4, doormat doormat, dressing dressing table with stool: 4 mirror, dressing dressing table with stool: 3 mirror, drum drum 200 ltr, drum drum 50 ltr, frill table frill, glass looking glass: 1x1, hospital hospital bed: 6.5x3, hospital folding stretcher, hospital surgical tray, hospital wooden examination table, hospital medicine counter: table with one tin above and one below 3x3, hospital bed side locker, kaleen kaaleen 6x9, masnad masnad with cover 6kg cotton, mattress cotton mattress 3kg cotton 3x6, mattress dunlop mattress 2"thick, mattress dunlop mattress 4"thick, mug mug, pelmet pelmet fitting as required with curtain hooks, pillow cotton pillow with cover 1kg cotton, pillow dunlop pillow with cover, platform flooring (wooden): providing and laying wooden flooring as required which will be fixed to 18/19 mm thick ply which is further fixed to wooden batten in both the direction (9" height), rack steel rack: 3 compartments, safe safe: 2x2x2, sofa special sofa set wooden/steel frame with spring cushioning and centre table with sunmica/ glass top 4x2, set of 3 piece- (3+1+1) 5 seater, with armrest, sofa sofa set wooden frame with dunlop cushioning and acrylic cloth covering and centre table with sunmica/ glass top 4x 2, set of 3 piece- (3+1+1) 5 seater with armrest, sofa sofa single seater wooden frame with dunlop cushioning and acrylic cloth covering, sofa sofa 2-seater wooden frame with dunlop cushioning and acrylic cloth covering, stand towel stand aluminium/steel, stool bath stool: 2x2, 6" high, wooden/plastic, stool wooden stool: sunmica top, table wooden executive table: laminated top, side rack and drawers: 6x3, table wooden executive table: laminated top, side rack and drawers: 5x3, table wooden executive table: laminated top, side rack and drawers: 4x3, table secretariat table: sunmica top with 3 drawers: 5x3, table secretariat table: sunmica top with 3 drawers: 4x3, table centre table: sunmica top and steel/wooden frame: 4x2, table conference table : 8x2, table dining table: sunmica top with 6 chairs: 5x3, table dining table: plastic with 6 chairs: 5x3, table table: sunmica top: 4x3, table tea table: sunmica top steel frame : 2x3, table centre table : sunmica top and steel frame: 3x1.5, table centre table: plastic: 3x1.5, table side table sunmica top 15"x15", table folding table steel fr

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Central Government/Public Sector

CTN :45702790

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - cond. and u/s furnitures of steel and ferrous of various sorts, shapes and sizes which includes steel rack, mobile racking system,book case ,pa system rack,pegeon hole lockers, bureaus,foldable stretchers,chairs of single/double/three seater, iron stand, back chair, arm chair, racks,steel table, computer office table, steel basin stand/trolly, stand for keeping shoe,steel folding screen,computer steel tables with/without drawls, rolling type chair, steel mayo/instrument trolly, steel bed side locker, industrial locker, foot stool, cup boards,platform seater,steel books show case, revolving chair, cot iron railing, iron chair, wheel chair, s type chair,tubular chair with/without arm, visitor chair,executive 3/4/5 seaters, steel chair,file cabinet, nylon chairnetwork rack, steel book case, audio rack,flower cots, data logger box,pediatric cot with railings, steel rakes pigeon hole, office table, rolling executive/non executive chairs,chair steel with arm, steel rake, table steel square with book shelf, battery rack, steel cupboard, almirahs, storage racks, slotted angle steel rack open type, steel chair with seat back, shelves, and cots and all other steel/ferrous furniture nature items of various sorts, shapes and sizes in full/broken/ dismantled/corroded/ attached/damaged and in loose condition with/without various ferrous and non ferrous attachments /fittings in as is where is condition. note: 1) cutting strictly not permitted. 2) segregation is not permitted. 3) removal of any sorts of attachments/adherings/fittings is not permitted. 4) if any stainless steel furniture found , the same has to be handed over to custodian.pl.no. 98415657

Bed Side Locker Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government

State Government

Central Government/Public Sector