Latest belcha Tenders | Government belcha Tenders

CTN :40235720

13 May, 2025 NA

Dharmapuri - Tamil Nadu

Tender For purchase of equipments for synchronous motor electrical machines -ii lab - purchase of equipments for synchronous motor electrical machines -ii lab, synchronous motor voltage ac 415v rating 3hp rpm -1500 dc existing filed current 0.8 a synchronous starterelectrical panel digital ammeter ac (0-500) v - 01 no digital voltmeter ac (0-20) a - 01 no digital voltmeter dc (0-2a) - 01 no supply indicator - 03 no 3 pole mcb -01 no20a fuse carrier -03 no s digital rpm indicator with proximately sensor -01 no terminal bti 30a panel with engrave diagramwork bench size 4 feet x 3feet x 2 feet htbrown color hylem sheet with circuit white color engraving leg teak wood top inch plywood finishing 18mm plywood with mica sheet -1 no back side wiring box closed & open type door front side cupboard with door open & closed type with stand

Central Government/Public Sector

CTN :40237791

26 May, 2025 NA

Delhi - Delhi

Tender For notice inviting tender towards rate contract for purchase of various furniture items for a period of two years - branded items (tenderer is required to quote only % of discount offered on mrp and brand name & model), metallic bench : 3 seater black colour without cushion, steel bench : 3 seater with cushion, steel bench : 3 seater without cushion, executive chair : blue colour, high back revolving chair, computer chair : red colour, mid back revolving chair, steel almirah (with shelves only) : in the size of 78 x 36 x 18 making five compartments, steel almirah (with shelves and one hanging rod) : in the size of 78 x 36 x 18 with atleast two shelves and provision of one hanging rod., steel wardrobe (with hanging rod and locker) : in the size of 78 x 36 x 18 having one locker, provision of one hanging rod and one tie bar, aluminium ladder : single leg, 5 ft. to 12 ft. (mention rate of 5ft. only in prevailing mrp column), aluminium ladder : double leg, 5 ft. to 12 ft. (mention rate of 5ft. only in prevailing mrp column), vertical filing cabinet : 4 drawer, approximate dimensions : 1320 mm(h) x 470 mm(w) x 620 mm(d), vertical filing cabinet : 2 drawer, approximate dimesnions : 710 mm(h) x 470 mm(w) x 620 mm(d), electronic safety box : digital lockable safety box of approximate 15 l capacity., officer s table (wooden) any reputed brand with the nearest specifications as follows : table top size - 5 ft * 2.5 ft table height 2.5 ft.type of wood superior quality laminated board of atleast 1 thickness.provision of fixed / attached lockable drawer unit at either side of the table.a separate side unit in the size of 36 (l) * 18 (w) * 28 (h), office table (wooden) any reputed brand with the nearest specifications as follows : table top size - 4 ft. * 2.5 ft. table height 2.5 ft.type of wood superior quality laminated board of atleast 1 thickness.provision of fixed / attached lockable drawer unit at either side of the table., mini computer table (with keyboard tray and drawer) any reputed brand with the nearest specifications as follows : 1) size 3 ft (l) x 2 ft (w) x 2.5 ft (h)2) laminated board of 1 thickness3) keyboard tray and lockable drawers4) provision of keeping cpu / ups / printer at the bottom, computer table any reputed brand with the nearest specifications as follows : 1) size 4.6 ft (l) x 2.3 ft (w) x 2.4 ft (h) (1 thickness of board)2) metallic frame wooden top.3) provision of lockable drawer.4) provision of keeping cpu / ups / printer at the bottom5) keyboard tray, executive table any reputed brand with the nearest specifications as follows : modern executive tables not exceeding width of 7 ft., coat stands : any reputed brand of following specifications: approximate height of 5 ft., footrest : any reputed brand of following specifications: approximate size 1.5 ft x 1 ft. with cushion of top, slanting desk (wooden) with following specifications : size 2 ft. x 1.5 ft., steel book cases : any reputed brand of following specifications: four compartments with lockable glass doors, customised items (tenderer is required to quote their lowest rates), wooden tub chair of following specifications :chair of approved brown color fabric, made up of good quality teak wood having wooden frame of 2 ft x 1.25 ft, seat in size of 19 x 20, legs of atleast 1 thickness, seat cushion (polyurethane foam, moulded with density 40 mm) of atleast 3 thickness, having spring washer with bolt for fixing arm partition with wooden frame in virtually invisible manner & heavy duty l-shape strip at all joints., chest of drawer of following specifications : top 38x19 with moulding height 42, drawer : 5 height panel 2 drawers, drawer height 8 , 02 wooden doors height : 24 , oriental legs 4 teak wood, made with board covered with 4mm. teak ply, designing of moulding teak wood, drawers site pannel board with telescopy channel, bottom 6mm ply providing 01 lock with melamine polish, teak board door of chest of drawer. one lock at the centre of middle shel

Central Government/Public Sector

CTN :39965271

08 May, 2025 9.26 Lacs

Jalpaiguri - West Bengal

Tender For bid to ras bid to ras supply of detergent cake , bathing soap , hair oil , tooth brush soft , tooth paste , tongue cleaner stainless steel , shoe police black liquid , sanitary napkins , shampoo , phenyl doctor bengal white , bleaching powder , harpic 500 ml , acid 1 ltr , wiper good quality big , phenyl goli , broom coconut loose , broom coconut bind standard size , phool jharu standard size , toilet cleaning brush big plastic handle brush both side , lime chuna good quality , phenyl black 1 litre , plastic belcha

corporations/Associations/Others

CTN :40239760

07 May, 2025 NA

Kolar - Karnataka

Tender For auction sale of scrap gi / ms pipes,used / scrap wooden furnitures,compressed turning & boring chips,condemned / scrap machines,scrap ms pallets,scrap dc wheels,condemned / scrap filters,used / scrap sheet metal / fabricated rejected parts,nickel chromium heating elements/rods/tubes etc.,scrap aluminium electrical cable,used / damaged light fittings,used / damaged wheel discs, disc rims, brake drums etc,scrap ms tubes / channels,scrap fabricated ms rods & stands,used / scrap stainless steel canteen utensils,scrap automobile spares,scrap high percentage nickel chromium charge trays,used / damaged retort and lid,scrap / used / codemned side discharge loader,scrap m.s. turning and boring chips,m.s. melting scrap - cut pieces,scrap control panel board,used / scrap heavy castings, forgings, etc.,end bits of track shoe profiles,scrap gears,flame cutting powder,condemned transformers,condemned electric motors,scrap bolts, nuts, washers, etc.,condenmed / scrap / used / damaged exaust fans,condenmed / used water geasers,used / condemned / scrap forklifts,m s turning and boring chips,aluminium turning and boring chips,used cond drill bits reamers /end mills etc,brass/bronze turning and boring chips,aluminium scrap,used/damaged/ removed from refurbished transmissions pressure plates,miscellaneous / used / damaged items,cond small /medium /big of various shapes castings,used/damaged tatra back bone tube,cond/used chips handling trolleys,used/damaged ms scrap pallets, etc.,used dameged jigs, chucks and fixtures,condemned test pieces,cond used aliminium fencing sheets,heavy casting scrap,electrical cabinet scarap,used/scrap ms sheet metal/fabricated rejected parts,used/scrap ms items,scrap ms fabricated sq.tubes/channels, pipes,used/damaged hpmv light fittings,used steel barrels,used oil filled in barrels,condemned / used empty plastic barrels,scrap plastic welding spools,used / scrap batteries,used / scrap / miscellaneousellaneous - belts, masks, shields, hoses, etc.,used / scrap cartoon box,condemned / scrap e-waste,used / scrap / miscellaneousellaneous - rubber, tubes, flops etc.,scrap wood,damaged tyres,used / scrap copper wire with sleave of assorted sizes,used oils,used/scrap batteries,e waste,used / scrap ms stands

CTN :40215761

17 May, 2025 NA

Dhoraji - Gujarat

Tender For rate contract for printing work , stationery items , xerox work , printer cartridge refilling , electric motor repair , panel board repair , wood for crematorium , shamshan bhatthi maintenance , animal catching service , tent service , etc.

CTN :40218970

12 May, 2025 88

Yelahanka - Karnataka

Tender For pump motor repair - guide vane, oil seal steel bush(oil seal sleeve), oil seal(pump oil seal), intermediate piece (i.p.) with i.p. leaded bronze bush, pump bowls, rewinding of motor of 20 hp, rewinding of motor of 17.5 hp, rewinding of motor of 15 hp, rewinding of motor of 12.5 hp, rewinding of motor of 10 hp, rewinding of motor of 7.5 hp, rewinding of motor of 5 hp, rewinding of motor upto 3 hp, transportation of pumping machinaries, motor base with pin, circlips(small), bearing (gun metal bush) centrifugal cost aluminium bronze bearing bush, studs and nuts, tip carbon/ferrode padding, thrust bearing block assembly (tb bottom), carbon housing(tb plate), lock ring(circlip big), lower housing, upper housing, lower flange, upper flange, labour charges (overhauling of pump only), brass filter, strainer, cable guard, pump coupling (stainless), pump key (stainless steel) upto 8 stages, pump shaft (stainless steel) counter less ground with key way upto 8 stages, allen screw, steel bush (i.d.o. ss sleeve), d.o. bearing( i.d.o lb bush), discharge outlet (d.o.) bearing(lb bush) and d.o steel bush(ss sleeve), impeller shell moulded with aluminium & bronze, supply and fixing of voltmeter, supply and fixing of ammeter, supply and fixing of led indicator, supply and fixing of wiring kit(sd upto 25hp), supply and fixing of wiring kit(dol upto 7.5hp)(mr), supply and fixing of no-volt (nv) coil, supply and fixing of terminal plate (connector 60a), supply and fixing of terminal plate (connector 30a)(mr), supply and fixing of ryb rotary switch(volt selector), supply and fixing of single phase preventer(20 to 30 hp), supply and fixing of single phase preventer(7.5 to 15 hp) (mr), supply and fixing of 15 amps relay (mr), supply and fixing of 23 amps relay (mr), supply and fixing of 33 amps relay, supply and fixing of 25 amps contactor, supply and fixing of 16 amps contactor(mr), erection of panel board & ms box (outdoor type) (gulbarga pred, pg.no.57, lt.no.12.2), supplying and fixing angle iron frame work fabricated out of m.s. angle iron and m.s. flat with bolt, washer etc and painted with 2 coats of red oxide and then two coats of approved paint 75x75x6mm (pwd ele sr 2014-15, pg.no.49, lt.no.6.39.3), refilling available earth around pipe lines, cable in layers not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m and lift upto 1.5m including cost of all labour complete as per specification pre sr 2011-12, p-3,1-6., labour charges for laying u.g. cable upto 3.5 core 25 sq.mm as per pwd electrical sr 2010-11, p-68,1-1, class a pvc cable, lifting of struck up submersible pump set above 300 ft (bwssb sr 2017-18/o150g/sl no.27), lifting of struck up submersible pump set upto 300 ft (bwssb sr 2017-18/o150g/sl no.26), labour charges overhauling, lifting of submersible pumpsets, re-errection charges of pumping machinery including overhauling and painting, cable joint, g.l. pipe threading including transportation, labour charges (for over hauling), supply and fixing of ct coil 50/5 & 75/5, supply and fixing of blade set 25a, supply and fixing of blade set 16a(mr), supply and fixing of hylum brand hand plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc and fixing of exciting wood or metal box using nf screw , supplying and fixing polished wood board made out of not less than 15mm thick planks at both sides with planks made out of not more than 2 pieces and fixing the same to the wall using tapered wooden plugs screws etc, fabricating, supplying and mounting ms box made out 14 swg suitable for foor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front over equipped with temper proof locking arrangements with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enamelled metal paint etc., com

State Government

CTN :40005702

10 May, 2025 NA

Sundernagar - Himachal Pradesh

Tender For corrigendum : supply of shovel belcha as per is 274 (part 1, part 2 and part 3) (q3) , spade (q4) , pick axe as per is 273 (q4)

CTN :40029834

09 May, 2025 12.00 Lacs

Dharwad - Karnataka

Tender For corrigendum : supplying construction materials for nrlm workshed in hireharakuni village in kundagol taluk dharwad district. - electrification(kund37), morrum(kund36), tractor trolley(kund34), plate compactor(kund30), water ppump(kund29), needle vibrator(kund28), concrete mixer(kund27), bar bending and cutting machine9(kund26), white vetrious china orissa apatern wc(kund25), brass bib cock(kund24), upvc pipe 25mm nominal bore(kund23), polyethylene water storage tank with cover (kund22), formwork,centering and scaffolding for columns beams and slab 101sqm(kund21), binding wire(kund20), vetrified tiles(kund19), mathi/nandi wood(kund18), glass panel(kund17), cleat angle(kund16), rubbers beading for shutters(kund15), aluminium tender bolt(kund14), aluminium window frame section 20mm thick(kund13), mild steel (kund12), distemper (kund11), plastic acryllic emulsion paint(kund10), white cement based putty (kund9), bricks(kund8), tmt bars(kund7), stone boulders 300mm(kund6), size stone 20x20x25cms(kund5), m-sand(kund4), broken stone aggregate 20mm size(kund3), broken stone aggregate 40mm size(kund2), opc cement (kund1)

State Government

CTN :40200920

14 May, 2025 47.70 Lacs

Patiala - Punjab

Tender For providing and supplying various types of furniture at new tehsil complex dudhansadhan, district patiala - executive table & side tableoverall size : w 2300 x d 1000 x h 750mm & side unit extention: w 1400 x d 550 x h 750mm. table top: 25mm thick pre laminated particle board with 2mm pvc edge lipping supported on v shape aluminium die cast connectors of min size 430 mm l x 110 mm h x 25 mm thick. 4 connectors on main table & 2 on side unit shall be provided. all sides of the worktop except corners of main & side table shall be provided with 2mm thick alumimum extrusion of 40mm + 25 mm + 30 mm + 8 mm formed into horizontal & vertical direction to enable support as well as top surface coverage. edge surface extrusion supporting the worktop to be tappered towards top. support: end legs: 50mm thick pre laminated particle board with 2mm pvc edge lipping & 3 equal drawer pedetal size of 600 x 850 x 570mm (ldh). modesty panel: 18mm thk pre lam board with 2mm pvc edge lipping of 450mm ht. wire management: slide connect with pvc cable dump. slide connect configuration - standard switch configuration no deviation 2 power,2 usb charger,1 network,1 hdmi. sufficient storage space to be priovided in the storage pedestal of the table having drawers at the main table & hinged door storage below the side unit. tolerance of +/- 5mm to be considered for dimensions length, depth & height and tolerance of 5% to be considered in thickness.the furniture brand shall have quality & safety related certifications that is: iso 9001, iso 14001, iso 45001, iso 50001, aiota for educational furniture & office furniture, idm (india design mark) for atlest five products by india design council, bis & (igbc) gold rated factory certification (indian green building council), griha (green rating for integrated habitat assessment) & green pro certification by cii (confederation of indian industries). iso certificates should be from a nabcb/ nabet / qci accredited agency., executive chairhigh back chair leatherettethe overall size of chair shall be:back width : 480mm , total height : 1150 to 1250 mm, back height- 755 mm. seat width : 490 mm, seat depth : 480 mm, seat height : 455 to 555 mm.twin casters 60mm dia with nylon material complying to ansi / bifma x 5.1 2017 standards. the axle pin is rust protected- zinc passivated. the pin is designed to have push fit with lock ring. base: the 660mm pcd (26 inches) five pronged base is made out of aluminium. the base outer diameter shall be 750 mm with casters. gas lift: : single swage class 4 tested -ansi bifma performance standards. the pneumatic height adjustment has an adjustment stroke of 95 -100 mm as per the seat height criteria and 360 revolving. designed with possibility to increase the seat height with gas lift stroke 110-115 mm if required. mechanism: synchro tilt mechanism this mechanism is manufactured out of cold rolled carbon steel is 513-1994 sheets, the steel components are manufactured with highly precision tools for accuracy in matching other parts for smooth functioning. the taper angle should match with the taper angle of gas lift swaging-- 1 26 16 . the steel components are fabricated by using co2 - mig welding process for giving uniform surface finish with higher tensile strength. springs are made out of grade ii material. composite release levers for locking mechanism in 4 locking positions & gas lift height adjustment. arms & back: it is a molded shell with ms frame and upholstered with leatherette. leatherette upholstery: shell is upholstered with 75% pvc & 25% polyester 640 gsm, abrasion- 100000 cycles. foam: cushion with pre moulded foam of 65 kg/m3 density in the shape of the mold.hardness 22 3 kgf. seat is upholstered with leatherette. ply wood: 12 mm thick with 9 ply. it is hot pressed ply - conforming to is 303. this technology ensures long and efficient and safe functioning of the chair without any shake and play in the long run. t

Central Government And Public Sector

CTN :40199587

14 May, 2025 NA

Dibrugarh - Assam

Tender For supply of sound insulation wood panel of size 16x1220x3090mm as per drg.no. mdts-75 rev 03 packing instruction: pi042 ver 1.0 [ warranty period: 30 months after the date of delivery ]

Belcha Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government

State Government

Central Government And Public Sector