Get complete information related to latest Belt Buckle Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Belt Buckle Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Belt Buckle Tenders.
Tender For supply of spring loaded switch momentary release hand operated mushroom head non-latching push button switch without enclosure; front dimension 39mm, cut out 22.5mm, colour : blue as per clw spec. clw/es/3/0044 embossing confirming to rdso/2024/el/ms/0505 (rev 0). note- interlock/contact element along with bezel with any actuator of same series should have undergone through vibration test iec60068 -2-6 with in lasr 3 years through nabl approved laboratory. [ warranty period: 30 months after the date of delivery ]
Tender For supply of spring loaded switch (bpvg) momentary release hand operated mushroom head non-latching push button switch without enclosure; front dimension 40 mm, cut out 22.5 m m, colour-blue, as per clw spec. no. clw/es/3/0044, embossing confirming to rdso/2024/el/ms/ 0505 (rev.0). [ warranty period: 30 months after the date of delivery ]
Tender For supply of set of push button for rdso modification sheet no. rdso/2024/el/ms/0505 (rev 1). 01 set c onsist of 02 items. 1.) spring loaded switch momentary release hand operated mushroom head non-latchin g push button switch without enclosure, front dimension 39mm, cutout dia 22.5mm, colour- blue, as per cl w spec no. clw/es/3/0044 embossing bpvg confirming to rdso/2024/el/ms/0505(rev 0), qty- 01 no./set. 2.) spring loaded switch momentary release hand operated flush type push button switch cutout dia 22.5m m, colour- yellow, embossed bpvr as per clw spec no. clw/es/3/0072/h confirming to rdso/2024/el/ms/ 0505(rev. 1), qty- 01 no./set as per uvam item ref. : 2200521--push button (mushroom) sch.no. 00170 /el /pt/0663. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : supply of centrifugal machine spares - spares for b&w make kt 1350 /34 centrifugal machine, oil seal 105 x 130x 15 matlic, oil seal 105 x 130 x 13 matlic, double rubber buffer for tilting chute, rubber o ring 160 x 3mm, h.t. bolt half thread unbrako 16mm x 120mm nut 16mm, nut 8 mm 8 mm, hexagonal s. s. bolt 10mm x 35 mm, hexagonal s. s. bolt 1" x 1", s. s. nut 10 mm x 10mm long, s.s. bolt half thread 16mm x 100mm, s.s.nut 16mm, s.s.allen key bolt 3/4" x 2", h.t. hex head bolt half thread with nut 20mmx90mm, h.t. hex head bolt full thread with nut 20mm x 100mm, s.s. bolt & nut 12 mm x 50 mm, s.s. clamp 2 mm thick 10mm hole, spares for nhec make nk/1100/30 centrifugal machine, s.s. needle valve 3/4" (ss-304), s.s. needle valve 1/2" (ss-304), brass spray nozzle, m.s. socket heavy duty 1/4", other spares, s.s. bolt 8mm x 25mm, s.s. bolt 10mm x 35mm, s.s. bolt 10mm x 40mm, s.s. bolt 12mm x 50mm, s.s. bolt 10mm x 60mm, s.s. nut 6 mm, s.s. nut 8 mm, s.s. nut 10mm, s.s. nut 12mm, dumping pad 75 x 150mm, dumping pad 75 x 60mm, stainless steel allen key bolt 12mm x 35mm, stainless steel allen key bolt 12mm x 30mm, stainless steel clit, rubber seal 87x103x10, rubber seal 31x40x3.5, oil seal for nk machine as per sample 75x85x10, 90x100x10, indicator elbow o ring x 3mm, indicator elbow o ring 3/4 x 3mm, clamp for rubber hose pipe size 2 x 24, rubber hose pipe with both side nut 1/2"x1000 mm 2100psi, rubber hose pipe with both side nut 1/2:x750 mm 2100psi, rubber hose pipe with both side nut 3/4":x1000 mm 2100psi, s.s. needle valve 3/4" (ss-304), rubber hose pipe x2 size with both side nut 2100psi, m.s. socket monarch nozzle, copper tube , brass connector with ferrule and nut , brass elbow with nut & ferrule , bearing housing with forged steel en-9 shaft and bearing (skf make nu-2215-2 nos., qj-215 01 no.) of nhec make nk-1100 centrifugal machine dynamically blanced, pulley od 235 mm no of grove 8 belt type c-148, moter pulley of nk-1100 centrifugal machine dynamically blanced od 326 mm no of grove 8 belt type c-148, spare pulley of bearing housing of nk-1100 centrifugal machine dynamically blanced od 235 mm no of grove 8 belt type c-148, pulley of bearing housing of kt-1350 centrifugal machine dynamically blanced od 240 mm no of grove 6 belt type spc-3550, motor pulley of kt-1350 centrifugal machine dynamically blanced od 290 mm no of grove 6 belt type spc-3550, spare shaft of nk-1100 centrifugal machine bearing housing, side cover of bearing housing of nk-1100 centrifugal machine, top cover, botttom cover, distance piece of nk-1100 centrifugal machine bearing housing, spare for 1750 kg charge centrifugal machine, oil seal 110x140x15, oil seal 170x200x15, o ring 110x3, o ring 140x4, o ring 240x5, circlip dia 140x4mm, spray nozzle flat jet 90 deg, set of tension ring for plough 60x68x12 (i set=3 ring pairs) with pressure ring, seal kit for 5" dia cylinder (02 nos.=1 set), rubber seal kit for pneumatic cylinder 6 x5 ", rubber seal kit for rotary distributor, rubber seal kit for 2" dia cylinder, rubber seal kit for 3" pneumatic cylinder, teflon seal for spindle locating arrangement, repair kit for butterfly valve 300 nb (2=1 set), repair kit for butterfly valve 200 nb (2=1 set), seal kit for pneumatic ball valve, solenoid valve 3013, solenoid valve 3012, coil for solenoid valve 3012/3013, proximity switch m 30x65, proximity switch m 50x65 for wobbling sensor, pilot operated non return valve with adapter 3/8", air filter ", flexible hose pipe 1"x1100 mm 2100psi, flexible hose pipe 1/2"x1200 mm 2100psi, flexible hose pipe 1/2"x800 mm 2100psi, flexible hose pipe 1/2"x900 mm with benjo connection 2100psi, flexible hose pipe 3/8"x1000 mm with benjo connection 2100psi, flexible hose pipe 3/8"x800 mm 2100psi, flexible hose pipe 1/4"x1000 mm 2100psi, flexible hose pipe 1/4"x700 mm 2100psi, 15-30 pnp no sensor type sw 4051 po, part no - inme0016size m30x65mm, supply voltage 10- 30 v dc sensing gap 15 mm. brass enclosure, 3 c
Tender For supply of 400a incomer fire panel , 300 mm gi perforated cable tray , 150 mm gi perforated cable tray , double compression gland suitable for 300qmm x 3.5 al armoured cable , copper flexible cable size 16sqmm x 4core , copper flexible cable size 25sqmm x 4core , earthing cable single core size 16sqmm x1 core , aluminium lugs size 300 sqmm , aluminium lugs size 185 sqmm , copper lugs size 35 sqmm , copper lugs size 16 sqmm , copper lugs size 10 sqmm , copper lugs size 06 sqmm , copper lugs size 04 sqmm , pg gland suitable for 35 sq.mm x 4core copper cable , pg gland suitable for 16 sq.mm x 4core copper cable , pg gland suitable for 10 sq.mm x 4core copper cable , pg gland suitable for 06 sq.mm x 4core copper cable , pg gland suitable for 04 sq.mm x 4core copper cable , copper chemical earthing , gi earthing strip size 25mmx3mm , cable tie 300 mm , cable tie 200 mm , pvc tape colour , emc 2000a lt panel modification , enclosure crca for extension of panel with cubicle type , 400 a mccb 36 ka with thermal magnetic release , 250 a mccb 36 ka with thermal magnetic release , double compression gland suitable for 400qmm x 3.5 al armoured cable , aluminium lugs size 400 sqmm , straight through jointing kit suitable for 300qmm x 3.5 al armoured cable , ms panel stand for panel mounting , mccb 250a 4 pole with thermal magnetic release with rotary handle and spreader link , mccb panel box with 250a aluminium busbar suitable for 250 a mccb , indication light , ms panel stand suitable for mccb panel box bid number/ & ( * ) : gem/2025/b/6300765 dated/ + : 02-06-2025 bid document/ 2 2 1 / 37
Tender For corrigendum : tender for supply of supplying of 3.0 tr ductable split ac unit , supplying of 1.5 tr ductable split ac unit , itc of 3.0 tr ductable , itc of 1.5 tr ductable , ms bracket compatible with outdoor unit , stand for outdoor unit , 1/4 inch dia. (od) 1.2mm thickness , 3/8 inch dia. (od) 1.2mm thickness , 1/2 inch dia. (od) 1.2mm thickness , 5/8 inch dia. od) 1.2mm thickness , 3/4 inch dia. (od) 1.2mm thickness , 40 mm dia. , 25 mm dia. , 3 x 4.0 sq.mm , 3 x 1.5 sq mm , copper conductor armoured cable of 4 x 2.5 sq.mm , supplying and fixing fp sheet steel enclosure , thickness 0.63 mm sheet , thickness 0.80 mm sheet , providing & fixing supply air grills , cable tray 150mm width x 50mm x 1.6mm thickness , without aluminium faced surface , with aluminium faced surface , providing and fixing of sandwitched artition , charging of refrigerant
Tender For bid to ras supply of pre fabricated store shelter made up of steel structure of size 18.30m x 6.10m x 3.00m clear height up to ceiling level with partition walls , fire extinguisher of capacity 6 kgs along with its accessories confirming to is 13849 two nos with each shelter , lightning conductor will be provided as under and stores are as per appx f , manufactured sand m sand conforming to is 383 1970 specifications for coarse and fine aggregates. , aggregate 20mm. stone aggregate to be crushed rock or gravel 20mm graded , aggregate 40mm. stone aggregate to be crushed rock or gravel 40mm graded , bricks common burnt clay building bricks sub class b modular , glass dividing strips 40x4mm , prefabricated foundation reinforcement type f 2 made of 12 mm and 10 mm , form work type 2 timber form work material for columns of size 0.3 x 0.3 x 0.9m , ms clamp made of ms flat 40 x 4 mm 200mm long bent in l shape with two holes , pvc ceiling rose 2 obliq 3 terminal. , led tube light fitting complete 4 feet long 18 watt tube rod and electronic ballast , xlpe insulated pvc seathed heavy duty armoured multi core cable 16 sqmm 2 core aluminum conductor , cable pvc insulated and pvc seathed 1.5 sqmm single core with copper conductor suitable upto 1100 v conforming to is 694 1990 , modular switch one way 6 amps one module conforming to is 3854 1966. , ms screw 20 mm full threaded per pkt 100 nos conforming to is 723 1972 , ms screw 25 mm full threaded per pkt 100 nos conforming to is 723 1972 , tape insulation 2 cm width 10.00mtr long isi marked , mcb single pole 230v ac 50 hz 6 amps 10ka conforming to is 8828 1996 iec 60898 2002 suitable for lighting and other domestic loads. , mcb distribution boards in sheet metal enclosure 4 ways single door with blanks conforming to is 8623, , residual current circuit breaker with overload and short circuit protection double pole 32 amps , modular socket 6a 2 obliq 3 pin combined 2 module , white cover plate with frame 2 module , white cover plate with frame 4 module , metal flush box 2 module , metal flush box 4 module , pvc casing caping pipe 25mm x16mm conforming to is 14927 part ii , pvc casing caping l bend 25mm conforming to is 371 1979 , pvc casing caping elbow 25mm dia conforming to is 9537 part iii 1983 , pvc casing caping t 25mm for conduit pipe , pvc casing caping square box 4 inch x 4 inch , drilling machine bosch gbh 2 26 re sds plus 2 mode rotary hammer drill 800 watts 26mm electrically driven. make bosch. , sieve for sieving fine and coarse agg 900 x 1500mm made of angle iron frame with stand. , aluminum straight edge 50mm square 2mm thick 1800 mm long , wooden flat gurmala , water levelling pipe pvc 100 mtr , hand rivet gun machine , tasla iron 18 , shovel with wooden handle , brick hammer 1.2kgs , cutting plier insulate 6 , screw driver 12 inch with insulated plastic handle , hacksaw frame with 2 blade , drill bit 6mm dia , drill bit 8mm dia , drill bit 10mm dia , hand gloves insulated with rubber , tape measuring metallic 30m , mason trowel karchi , axes picks with wooden handle , fawda with wooden handle , crowbar 5 feet long , rammer with wooden handle of wt 5 10 kg , pipe wrench 12 inch , pipe wrench 18 inch , aluminum spirit level 6 inch , brick line , spanner adjustable 12 inch
Tender For bid to ras supply of living shelter 10 to 12 men - pre fabricated shelter made up of steel structure and hybrid pir panels in wall , fire extinguisher of capacity 2 kgs along with its accessories confirming to is 13849 two nos with each shelter , heating device kerosene based two nos heating , lightning conductor. lightning conductor will be provided as under and stores are as per appx e and drg at appx f sheet 10 10 , aggregate 20mm. stone aggregate to be crushed rock , aggregate 40mm. stone aggregate to be crushed rock , manufactured sand m sand confirming to is 383 2016 specifications for coarse and fine aggregates , bricks common burnt clay building bricks sub class b , white cement make- birla white jk cement acc packet 01 kg , water proof floor silica panels of size 600 x 600 mm with minimum thickness of 10 mm , non skid ceramic tiles coloured 7 to 8 mm thick in floors etc , prefabricated foundation reinforcement type f 2 made of 12 mm and 10 mm for steel as main bars and 8 mm dia deformed bars as in stirrups including cutting bending , form work type 2 timber form work material for columns of size 0.3 x 0.3 x 0.9m and columns footing of size 0.9 x 0.9 x 0.3 m , rapidite quick setting liquid. , ms clamp msde of ms flat 40 x 4 mm 200mm long bent in l shape with two holes of 12mm dia on each end. 04 x nut and bolt of size 10 x 50 mm with washer. , pvc ceiling rose 2 obliq 3 terminal make anchor pilot 3 plate , led tube light fitting 1 x 18w 4 feet long complete with all , xlpe insulated pvc seathed heavy duty armoured multi core cable 16 sqmm 2 core aluminum conductor for working voltage up to and including , cable pvc insulated unsheathed single core flexible copper conductor 1100v grade of size 1.5 sqmm , cable pvc insulated unsheathed single core flexible copper conductor 1100v grade of size 2.5 sqmm conforming to is 694 1990 , cable pvc insulated and pvc sheathed 1100v grade twin core with stranded aluminium conductor confirming to is 694 1990 of size 4 sq mm , flexible wire pvc insulated twin core twisted of size 22 0.0076 with copper conductor. , modular switch one way 6 amps one module confirming to is 3854 1966. , ms screw 20 mm per pkt 100 nos confirming to is 723 1972. , ms screw 35 mm per pkt 100 nos confirming to is 723 1973. , insulation tape 2 cm width 10 mtr long isi marked make steel grip. , mcb single pole 230v ac 50 hz 6 amps 10ka confirming to is 8828 1996 iec 60898 2002 suitable for lighting and other domestic loads. , mcb single pole 230v ac 50 hz 16 amps 10ka confirming to is 88281996 iec 60898 2002 suitable for lighting and other domestic loads. , mcb distribution boards in sheet metal enclosure 8 ways double door with blanks confirming to is 8623 , residual current circuit breaker with over load and short circuit protection dp 32 amps , modular switch one way 16 amp 1 module , modular socket 6a 2 obliq 3 pin combined 2 module , modular socket 6a 16a 2 obliq 3 pin combined 2 module , white cover plate with frame 3 module , white cover plate with frame 6 module , metal flush box 3 module , metal flush box 6 module , compact street light luminaire with deep drawn housing complete along with single 36w fr l , pvc casing caping pipe 25mmx16mm confirming to is 14927 part ii , pvc casing caping l bend 25mm confirming to is 371 1979 , pvc casing caping elbow 25mm dia confirming to is 9537 part iii 1983 , pvc casing caping t 25mm for conduit pipe , pvc casing caping square box 4inch x 4 inch , plastic body exhaust fan 250 mm sweep with louvers , plastic body wall mounting fan 450mm sweep , two tier sleeping bunks as per drawing attached to be provided by vendor the vertical head leg side in duble portion of size 1950x950mm shall be made of 32 mm , waste bin 120 ltr dim 480 x 550 top o.d. colour dark brown make nilkamal or equalent , plastic chair with handrest model dynasty dim 570 w x 593d x 890h. colour dark brown make nilkamal or equalent , cup board model freedom fmdr 1b dim 595 w x 354d x 1450 h colour
Tender For supply of various items for scheme maintenance and hp repairing of various subdivision under division salumber.-, aluminum armored cable 4.0 sq mm 2 core isi, aluminum armored cable 6.0 sq mm 4 core isi, aluminum armored cable 10.0 sq mm 4 core isi, aluminum armored cable 16.0 sq mm 4 core isi, amp meter 0 to 30 amp round 4" size, amp meter 0 to 100 amp round 4" size, volt meter 0 to 500 amp round 4" size, tyton rubber gasket 150 mm isi, tyton rubber gasket 200 mm isi, rubber compound, ci foot valve 2" size, ci foot valve 2.5" size, ci foot valve 3" size, pvc hose pipe 1" size, pvc hose pipe 2" size, pvc hose pipe 2.5" size, pvc hose pipe 3" size, cotton waste, hacksaw blade (100 pcs. pkt.), rubber flange washer, 50 mm size, 65 mm size, 80 mm size, mccb fixed thermal magnetic setting 160 amp 25 ka 3 pole, m.s. nut bolt f/t 40x12, m.s. nut bolt f/t 50x12, m.s. nut bolt f/t 80x16, m.s. nut bolt f/t 90x16, m.s. nut bolt f/t 100x16, 63 amp tpn din sdf w/o fuse enclosure, , 100 amp tpn din sdf w/o fuse enclosure, 200 amp tpn din sdf w/o fuse enclosure, hrc fuse din type 63 amp size 00, hrc fuse din type 100 amp size 00, hrc fuse din type 200 amp size 00, fuse bases for din type 6 to 160 amp size 00, fuse wire 15 amp, fuse wire 30 amp, d joint ring 3", d joint ring 4", d joint ring 5", d joint ring 6", d joint ring 8", d joint ring 10", copper lug 10 sq. mm, copper lug 16 sq. mm, copper lug 50 sq. mm, copper lug 35 sq. mm, copper lug 70 sq. mm, copper lug 120 sq. mm, copper lug150 sq. mm, copper lugs heavy duty (crimping type) 240 sq mm, copper lugs heavy duty (crimping type) 300 sq mm, copper lugs heavy duty (crimping type) 400 sq mm, heat shrinkable 6.6 kb (ue) 11 kv (e)xlpe indoor termination 50 sq mm size, heat shrinkable 6.6 kb (ue) 11 kv (e)xlpe outdoor termination 50 sq mm size, coupling set l 225, coupling set l 190, coupling set 6 bolt 8" size rb 198, pin bush coupling 185 mm od 6 bolt heavy duty, coupling set sw 190, coupling set sw 225, coupling set 8" size, spinder sw 225, spinder sw 190, spinder sw l 225, spinder sw l 190, d joint set 90 mm long collar, d joint set 110 mm long collar, g.m. gate valve, gi flange with cut hole 50 mm, gi socket long 50 mm with socket, patta clamp 50 mm, ball bearing 6204, , ball bearing n206 etvp 2 fag, ball bearing 6211, ball bearing 6212, ball bearing 6307, ball bearing 6308, ball bearing 6309, ball bearing 6311, ball bearing 6312, ball bearing 6313, ball bearing 6314, ball bearing 6319, gland packing 8 mm, gland packing 10 mm, gland packing 12 mm, rubber sheet 3 mm, gi bend 50 mm withy socket, g.m. non return valve mm 50 mm, leather shheet 12x12, mcb 25 amp. 4 pole, grease ap3 one kg paking, pvc insulated tape ", rubber coupling bush small, rubber coupling bush medium, rubber coupling bush big, m seal compound (100 gm packing), multi stand copper wire 1.5 sq mm, (90 m role), multi stand copper wire 2.5 sq mm (90 m role), multi stand copper wire 4.0 sq mm (90 m role), coupling bolt 1/2x3, coupling bolt 1/2x4, coupling bolt 3/4x4
Tender For various ancillary services for hims project at various departments in m.s. building, o.c. building and old building of k.e.m. hospital . - miscellineous services, 3 noss. single core cu pvc insulated flexible cable of 50 sq.mm. for phases & 1 single core cu pvc insulated flexible cable for neutral of 25 sq.mm for 100/125 amp. tpnss switch., 3(ph) noss. single core cu pvc insulated flexible cable of 25 sq.mm. for phases & 1 single core cu pvc insulated flexible cable for neutral of 10 sq.mm. for 63 amp tpnss switch., 100/125 amp. 415v tpn switchfuse unit with crca sheet steelpowder coated enclosure with hrc fuses & switch links., 63a tp mcb, 32a tp mcb, supply, installation, testing, commissioning, performancedemonstration of 2 kva ups true online with 1 phase input, 1phase output with back up batteries for 2 hours backupalong with rack & connectors.nos, 1st category cu armoured cables frls outer sheathed- 4c x 16sq.mm mtr, 20amp sp mcb with 20a ray roll type, 3pin plug & socket with cap & chain etc.