Latest belt winder machine Tenders | Government belt winder machine Tenders

Central Government/Public Sector

CTN :40267232

19 May, 2025 NA

Burnpur - West Bengal

Tender For tender for supply of 45120009000835 non drive pulley bnd 7 non drive tail , 45120009000813 non drive pulley bnd 8 non drive tail , 45120009000811 non drive pulley bnd 11 non drive tail , 45120009000877 non drive pulley bnd 12 non drive tail , 45120009000825 non drive pulley bnd 14 non drive tail , 45120009000728 non drive pulley bnd 16 non drive tail , 45120009000771 non drive pulley bnd 20 non drive tail , 45120009000668 drive pulley assembly bd 1 , 45120009000667 drive pulley assembly bd 2

CTN :40289999

21 May, 2025 NA

Sundergarh - Odisha

Tender For supply of pulley and tail snub pulley: m5505241006: 1200: head drive 2370x1400x800mm , m5505241001: 1200: 1860x1400x500mm ( fl x sl x sd)

corporations/Associations/Others

CTN :38365406

13 May, 2025 NA

Donimalai - Karnataka

Tender For bid to ras bid to ras corrigendum : tender for supply of drive and non drive pulley - drive pulley , pulley , pulley and plumber block , puly nd , drive puly , nd puly , pulley , non drive tail pulley , pulley , pulley tail , pulley drv , conv , pulleys , pulley takeup main , fine ore stacker boom snub pulley with p , fine ore stacker drive tripper head bend , non drive pulley , elecon reclaimer boom conveyor tail pul , intermediate drive pulley with plummer , shuttle conveyor drive pulley with plumm , screw take up pulley with plummer block , boom conveyor tail pulley with plummer b , drive pulley , non drive pulley with plummer blocks and , non drive pulley with plumber block and , nd puly with , non drive bend pulley for bc414 , non drive bend pulley for bc515 , drive pulley lg bearing , reclaimer nd pulley with

Central Government/Public Sector

CTN :40217703

24 May, 2025 NA

Cuddapah - Andhra Pradesh

Tender For supply of pulley for hbf, model: 42b/09 30v neutral & leach, make: takraf head pulley , pulley for hbf, model: 42b/09 30v neutral & leach, make: takraf, tail pulley

CTN :40201641

31 May, 2025 15.00 Lacs

Rewa - Madhya Pradesh

Tender For supply and delivery of water supply - s.s. clamp nut with bolt 2 inch, a.c. pipe 3 inch, a.c. pipe 4 inch, h.d.p. nipple 1 inch isi, h.d.p. nipple 2 inch isi, h.d.p. nipple 3 inch isi, h.d.p. pipe 1 and 3/4 inch kisan/taxmo, washer 2 and 3 no., bleaching powder gracing, brass elbow 1/2, brass elbow 1, brass elbow 3/4, raw rubber, cable 2.5 and 6 mm. national/kisan/taxomo, connection cable 3 mm/armed-isi, connection cable 4 mm/armed-isi, connection cable 6 mm/armed-isi, connection clamp 2 inch, connection clamp 3, inch, connection clamp 4 inch, connection clamp 5 inch, connection clamp 6 inch, connection clamp 8 inch, pvc socket 1, inch, pvc socket 1/2 inch, pvc socket 3/4 inch, pvc wall 1 inch, pvc wall 1/2 inch, pvc wall 3/4 inch, p.v.c. tee 1 inch, p.v.c. tee 2 inch, p.v.c. tape, p.v.c. gate valve 1, inch kisan/taxmo, p.v.c. gate valve 1/2 inch kisan/taxmo, p.v.c. gate valve 2 inch kisan/taxmo, p.v.c. gate valve 3/4 inch kisan/taxmo, p.v.c. elbow 1 inch kisan/taxmo, p.v.c. elbow 1/2 inch kisan/taxmo, p.v.c. elbow 2 inch kisan/taxmo, p.v.c. elbow 3/4 inch kisan/taxmo, p.v.c. casing pipe plain pipe 100 mm casta/kisan, pvc pipe 1 inch kisan/taxmo, pvc pipe 1/2 inch kisan/taxmo, pvc pipe 3/4 inch kisan/taxmo, pipe wrench 12 inch, pipe wrench 14 inch, pipe wrench 16 inch, pipe wrench 18 inch, pipe wrench 24 inch, pipe wrench 28 inch, pipe wrench 36 inch, pipe lifter 2.25 inch, pipe wrench 12 inch, pipe wrench 14 inch, pipe wrench 16 inch, pipe wrench 18 inch, pipe wrench 24 inch, pipe wrench 28 inch, pipe wrench 36 inch, pipe die 1/2 inch, pipe die 1/4 inch, panel board 15 h.p.three fash/ l.t.l, panel board 1.5 h.p.three fash/ l.t.l, panel board 17.5 h.p.three fash/ l.t.l, panel board 20 hp three phase / ltl, panel board 25 hp three phase / ltl, strap clamp 1, inch isi, strap clamp 1/2 inch isi, strap clamp 1/4, inch isi, strap clamp 2 inch isi, strap clamp 3 inch isi, rubber ring 80 mm isi, rubber ring 100, mm isi, rubber ring 125 mm isi, rubber ring 150 mm isi, rubber seat packing, rod die, submersible 1 hp 8,10,12,16 stage single phase jasco / taxmo / cri, submersible 10 hp 12 stage three phase jasco/taxmo/cri, submersible 20 h.p. 12 stage three phase jasco/taxmo/cri, submersible 7.5 h.p. 8,10 stage three phase jasco/taxmo/cri, submersible 15 h.p.10 stage three phase jasco/taxmo/cri, c.i. flanch 2 inch, c.i. flanch 3 inch, c.i. flanch 4 inch, c.i. reducer tee 100 y 100 mm.-isi, c.i. reducer tee 80 y 100 mm.-isi, c.i. reducer tee 100 y 100 y 150 mm.-isi, c.i. reducer tee 80 y 80 y 100 mm - isi, c.i.t 100 y 100 y 100 mm - isi, c.i.t 100 y 100 y 80 mm - isi, c.i.t 150 y 150 y 150 mm - isi, c.i.t 80 y 80 y 100 mm - isi, c.i.t 80 y 80 y 80 mm - isi, ci. air ball 80 mm - isi, ci. air ball 100 mm - isi, ci. air ball 150 mm - isi, ci. band 100 mm 45 degree - isi, ci. band 100 mm 90 degree-isi, c.i. band 150 mm 45 degree-isi, c.i. band 150 mm 90 degree-isi, c.i. band 80 mm 45 degree-isi, c.i. band 80 mm 90 degree-isi, c.i. slushy ball 100 mm-isi, c.i. slushy ball 150 mm-isi, c.i. slushy ball 25 mm-isi, c.i. slushy ball 50 mm-isi, c.i. slushy ball 80 mm-isi, c.i.d. joint 100 mm-isi, c.i.d. joint 125 mm-isi, c.i.d. joint 150 mm-isi, c.i.d. joint 80 mm-isi, c.i. non return ball 100 mm-isi, c.i. non return ball 125 mm-isi, c.i. non return ball 150 mm-isi, c.i. non return ball 50 mm-isi, c.i. non return ball 80 mm-isi, c.i. tail piece 100 mm-isi, c.i. tail piece 150 mm-isi, c.i. tail piece 80 mm-isi, solvent, safeda, section pipe p.v.c. 3 inch dutran/kisan/taxmo, section pipe p.v.c. 4 inch dutron/kisan/taxmo, centrifugal pump 20 h.p. three phase jasco/crampton/taxmo, centrifugal pump 25 h.p. three phase jasco/crampton/taxmo, centex/kisan/taxmo, starter oil, voice hand pump 4 nos., chain pan 4.6 & 8 nos., chain pulley (block) 2 ton, football 3 & 4 inch, g.i. nippule 1, inch, g.i. nippule 1/2, inch, g.i. nippule 3.6 inch, g.i. nippule 9 inch, g.i. reducer tee 50 y 50 y 80 mm-isi, g.i. reducer tee 100 y 100 y 80 mm - isi, gi reducer te

CTN :40201943

21 May, 2025 NA

Multi City - Andhra Pradesh

Tender For procurement of non drive pulley (tail/take up) of 15a/bconveyors and intermediate/boom drive pulleys of special repair section

State Government

CTN :40162210

12 May, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of c.i./c.s casted item - c.i. casted items on new basis, c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.

corporations/Associations/Others

CTN :40144746

24 May, 2025 4.84 Lacs

Puruliya - West Bengal

Tender For repairing of clarifier, footings of legs of foundation structure at tail pulley of conveyor at tp-3, roof slab of silo and other structures including grouting at rtps, dvc.

CTN :40078438

12 May, 2025 NA

Srinagar - Jammu And Kashmir

Tender For tender for supply of chain pulley block (0.5t capacity) , philips head screw driver 100 mm long ti , wheel nut spanner & tommy bar complete , tail light lh side 4 chamber rectangul , strainer , tyre pressure gauge , camplate , triangle kit bag/small , assy hose suct/discharge w/o ring vai , valve check (130 076 660 084) , cab tilt hydraulic pump , element oil filter , push tap , lamp assy fr combination lh , belt v , sensor , relay main and fuel , tail light , tool bag , tommy bar complete

Belt Winder Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

State Government

corporations/Associations/Others