Latest bench drilling machine scrap Tenders | Government bench drilling machine scrap Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

Central Government / Public Sector

CTN :45736535

21 Jul, 2026 NA

Guntur - Andhra Pradesh

Tender For supply of rail drilling machine as per rdso specification (no.tm/sm/3dt. 19.11.1992) first revision, 2020 or latest if any [ warranty period: 12 months after the date of delivery ] ]

CTN :45652757

29 Jun, 2026 NA

Malda - West Bengal

Tender For supply of compact & portable petroldriven rail drill machine, drillingcapacity 6 to 36 mm dia, 36 mmcutting depth capacity automatic selfcentring special rail clamp adaptor, extra large coolant tank. suitable for52 kg, 60 kg tounge rail. point \machine base plate. weight: approx15 kg w/o attachment. macine size(min-max): hxlxw: 160x70x110mm -470x535x345 mm, track time: drilling-45 sec, clamping-10 sec declamping-10 sec. make: ojasvi, rotacut or similar.

CTN :45652359

29 Jun, 2026 NA

Malda - West Bengal

Tender For hss special rail track drill bit suitable to work with bds/ojasvi make special drill adaptor with allen screv locking system that can be fitted with bds/ojasvi mak rail track drilling machine model railmab 965/mg36specifications:1. dia: 7.1 mm.2. lockingallen screw. make: ojasvi or similar.

Central Government/Public Sector

CTN :45652536

09 Jul, 2026 NA

Bengaluru - Karnataka

Tender For supply of rail hole drilling machine as per rdso specification no tm/sm/3 dt. 19.11.1992 first revision 2020 ]

Central Government/Public Sector

CTN :45556301

23 Jun, 2026 NA

Mysore - Karnataka

Tender For supply of portable rail drilling machine fitted with petrol or kerosene run engine as per rdso specification no. tm/sm/3 dtd: 24/04/1991 or latest along with socket of size 32mm and drill bit of size 17.5mm each 1nos to be supplied . accepted firm's offer: rdso specification no. tm/sm/3, dtd.19.11.1992 [warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45545820

06 Jul, 2026 NA

Samba - Jammu And Kashmir

Tender For corrigendum : supply of battery operated rail drilling machine capacity from 18mm to 32mm with all required drill bits from 18 mm to 32mm size as per rdso specification no.tm/sm/468 dt.31.03.2014 second revision 2020.[ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45515759

23 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - scrap m.s melting iiird class i.e. rail pieces below one mtrs of various poundage 60/52kg/ 100/ 90/82/75/35lbs & rail/point &xing materials melted peices, rail flange,rail gola,rails bladges ,broken gate structure of angle, fish plates , broken released jfp, broken f/plate jn. f/plates of various poundage, grider cut pcs, bridge checker plate, conversion material, wooden &t/out bearing plate, slide chairs, welding riser material , broken erc, two way keys, ¿j¿ type erc, m.s. liner, check rail cut pcs, t/rails, s/r, w/r,v/rail cut pieces, washers, tie bars, tie bars fencing, released hook bolt , xing bolt, fish bolt, stud bolt , strecharbar bolts, nut washrs various types ,g/joints of rail 60/52kg, bridge girder broken materials ,released gates materials, various types section boards, st & xing sleepers cut pcs, sej cut rail pcs of t/r, s/rail, stretcher bar, switch chairs ,plate screw, bar strainghting crow bar, beater- pick, pans. mortor, wire, basket, shovel, rail- tong, hs lamp, wire clow, pawrah, various type hammers, augers, adzes, drills,pad lock,blunt ended crow bar , bar claws bar tommy, ballast rake, boxes tools iran,gauge, chain gates, cold sets, jim crew, push trolly, pick axes ,gi bukcet, panches pin slopping, solid box spanner, double face trolly lamp, empty drum 20litrs cap., grease & oil empty drum, adjustable spanner, e.r.c extractor, first aid box for rail fracture, rail dollies , spanner- f/ bolt & light weight , light weight rail cum road trolly,abrisive rail cutting base, drilling machine,chamfering bit, spare part of champring kit,thermit welding tools equipment & accessories 52kg/60kg and mechanical equipment , push trolly wheels, welded chain,whistel, m.s.angle, m.s.rod, m.s.sheet, ballast screen, straight edgs 1 m long/10cm, universal molding, vapariser keys, stand, welding equipment & tools box, crucible charge, bend pipe, chisel, various type boards, plier com, various type drills ,augers, cutter 52kg/60kg, tourches,crushible carring ring,fork, stand, nozzal, moluld shoes 60kg/52kg, tourch house pipe switch fittings & various types of p.way fittings, rpf theft case/cort case (rail/point & xing materials melted peices, rail flange,rail gola,rail bladge ) property inclueds etc¿¿¿.¿¿.

Central Government/Public Sector

CTN :45473169

02 Jul, 2026 NA

Bikaner - Rajasthan

Tender For supply of rail drilling machine (light weight) as per rdso drg.no tm/sm/3 dt.19.11.92 (first rev.2020) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45479223

22 Jun, 2026 NA

Vijayapura - Karnataka

Tender For supply of light weight rail hole drilling machine as per rdso specification no. tm/sm/lwrdm or latest [ warranty period: 30 months after the date of delivery ] ]

Bench Drilling Machine Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors