Latest bench wise Tenders | Government bench wise Tenders

Central Government And Public Sector

CTN :45090913

04 Jun, 2026 NA

Guwahati - Assam

Tender For design, manufacturing, supply, installation, testing and commissioning of electric overhead traveling crane, capacity: 35/10t and dsl along with spares as per schedule-iv and additional spares and items viz slings/lifting tackles as specified in schedule-i, maintenance tools as per schedule-v, any other accessory treated as concomitant accessory and preventive maintenance during 1st and 2nd year of warranty period. [ warranty period: 24 months after the date of delivery ]

Central Government/Public Sector

CTN :45082405

30 Jun, 2026 NA

Duliajan - Assam

Tender For supply of import substitution of items by indigenous development - crome casing pipes, chrome tubing pipes, drill pipes, heavy weight drill pipe, drill collars and lifting plug, drilling stabilizers, drilling/ workover handling tools --- elevators, tongs,, slips etc., potassium formate, solid control equipment --- mud cleaner/ degasser/, centrifuge/ linear motion shale shaker, sucker rod pump (srp) and its accessories:, tubing conveyed sucker rod downhole pump, rod conveyed sucker rod downhole pump, downhole gas separator, downhole anchor catcher, srp fishing tools:, overshot, spares for overshot (grapple, control, guide etc.), srp insert pump, ethyl mercaptan, low shear velocity fluids/polymers, emd chemical dosing pump, reciprocating pump, hsp 20/40, isp 20/40, isp 30/50 mesh, pig tracker/transmitter, pipeline locator, logging cables, tri cone roller drilling bits of various sizes, 11"od standard reverse circulating junk basket & 7.7/8" od reverse, circulating junk basket, pdc drill bits of various sizes, fishing tool; 6.5/8 inches od junk sub for operation inside 8.1/2 inches hole, impression block for 4.5 inch od, 5.0 inch od, 9.625 inch od & 13.375 inch od, casing, pneumatic spinner, 5.1/ 2" premium threaded casing (grade: n80 & grade p110), cased hole logging units with tools and accessories along with, installation, commissioning and training, wireline mast unit, including training and installation& commissioning, oil well explosives: (i) 2-1/8 inch tubing cutter along with detonator and, hardware accessories, (ii) 1-9/16 inch tubing puncher/ circulation charge & hardware accessories, oil well explosives: explosives for baker pressure setting tools: power, charge, primary ignitor & secondary ignitor, procurement of oil well explosives used in exploration and production of, hydrocarbon, (i) deep penetration charges, (ii) resistoriess detonator assy,, (iii) deto cord 80 hmx nylon ls 1.4s, (iv) 54 mm strip carrier, 6spf, 12 ft/3 m long, (v) detocord /charge clips, (vi) tandem connector ,2.1/8" stri p carries, (vii) splice boot for lead wire, (viii) detonator cord retainer, (ix) 53.975 mm (2.1/8") od firing head assy, (x) nut & bolt for connecting strip, (xi) nut & bolt for connect tandem(xii) deto cord end seal (100 nos./pkt), (xiii) 2.1/8" charge tightening wrench, 27.1/2" (698.50 mm) rotary table, 7.1/16" x 10 m double ram bop with accessories, 13.5/8" x 10 m single ram bop with accessories, 3.1/16" x 10 m flexible steel hoses for choke manifold, 3.1/8" x 5 m flexible steel hoses for choke manifold, 2.1/16" x 5m - ss flexible steel hose 3.1/16" x 10m - ss flexible steel hose, 3.1/8" x 5m flexible steel hoses, thermal wellheads for 7" and 9.5/8" casing completion with installation &, commissioning, hose vibrator, rotary hose, drilling in assorted length, 2.34 mm (0.092") piano wireline (well measuring line), static gel strength analyzer, electronic reservoir pressure and temperature measuring gauge., automatic distillation apparatus, ft ir spectrophotometer, rheometer, 350 short ton drilling hook & elevator links (250 short ton, 350 short ton, and 500 short ton), digital acoustic liquid level measuring cum dynamometer equipment, (echometer), cross over, premium box x api eue & pup-joint, 2.7/8", premium in assorted, length, geological thin section preparation unit comprising of cutting, vacuum, impregnation, grinding and polishing equipment and consumables., polarised microscope, pony drill collar, premium tubing, 37.1/2 rotary table, air gas permeameter, double block and bleed isolation plug, gas chromatograph, low to moderate temperature cement retarder, high temperature fluid loss control cement additive, xcd-polymer, xc-polymer (premium), poly anionic cellulose-regular, poly anionic cellulose-super lo, junk sub 5.1/2 inch & 7 inch, 13.5/8-inch x 10000 psi annular bop, 13.5/8-inch x 10000 psi double ram bop., ct reels, super fishing jar, drilling jar, overshots, slammer l

State Government

CTN :44702029

18 May, 2026 NA

Manuguru - Telangana

Tender For corrigendum : supply of various tools and plant items for boiler divisions of stage-i and ii, btps.

CTN :45086304

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/30/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) er 72029562906 bobrm1 (wm) 2) er 72029661692 bobrnm1 (wm) 3) nr 75039260183 bobsnm1 (nlb) 4) se 75079218106 bobsnm1 (nlb) 5) cr 75019260158 bobsnm1 (nlb) 6) se 10079617986 boxnm1 (nlb) nb: (1) : i) wagons are to be sold with 04 nos. wm trolleys against srl. no. 01 and 02. ii) wagons are to be sold without 08 nos. nlb trolleys against srl. no. 03 to 06. ii) wagons srl no 01 to 06 to be sold without 24 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086305

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/29/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079260648 bobsnm1 (nlb) 2) nr 75039160568 bobsnm1 (nlb) 3) cr 75019260103 bobsnm1 (nlb) 4) se 75079215020 bobsnm1 (nlb) 5) er 75029060830 bobsnm1 (nlb) 6) special repair 75069260054 bobsnm1 (nlb) 7) nr 75039188050 bobsnm1 (nlb) 8) cr 75019208051 bobsnm1 (nlb) 9) nr 75039160810 bobsnm1 (nlb) 10) nr 75039160520 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against special repairl. no. 01 to 10. ii) wagons special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086306

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/28/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079260754 bobsnm1 (nlb) 2) nr 75039187923 bobsnm1 (nlb) 3) sc 75099160133 bobsnm1 (nlb) 4) cr 75019208020 bobsnm1 (nlb) 5) cr 75019260097 bobsnm1 (nlb) 6) ne 75049260012 bobsnm1 (nlb) 7) nr 75039160537 bobsnm1 (nlb) 8) se 75079215273 bobsnm1 (nlb) 9) nr 75039187893 bobsnm1 (nlb) 10) se 75079260532 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against srl. no. 01 to 10. ii) wagons srl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086307

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/27/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079160320 bobsnm1 (nlb) 2) se 75079260266 bobsnm1 (nlb) 3) se 75079260334 bobsnm1 (nlb) 4) se 75079216317 bobsnm1 (nlb) 5) se 75079218250 bobsnm1 (nlb) 6) nr 75039160780 bobsnm1 (nlb) 7) se 75079260471 bobsnm1 (nlb) 8) er 75029260179 bobsnm1 (nlb) 9) nr 75039187725 bobsnm1 (nlb) 10)se 75079260389 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against srl. no. 01 to 10. ii) wagons srl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45084532

15 May, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of office items c c - adaptor , weighing machine , lamp , ajanta wall clock , printer cover , battery , battery trolley , ro , laptop power socket , bt speaker , vaccum cleaner , water dispenser bottle , extension board , dustbin , acrylic name plate , garden tools , wireless door bell , car lap top stand , led bulb , electric wire 107m , three plug , bathroom mirror , iron pole

CTN :44687071

07 May, 2026 24.17 Lacs

Bathinda - Punjab

Tender For corrigendum : supply of supply of superstructure of small store shelter , supply of construction material , supply of electronic , supply of earthing items , supply of lightening conductor , supply of furniture items , supply of tools

Central Government/Public Sector

CTN :45076180

12 May, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 49 )items as given below ,[1] dismantling of rcc, pcc & removal of de 25.000 m3,[2] disman,all brick wrk,upto thk127mm 10.000 m2,[3] scrpg off,old plaster 500.000 m2,[4] earth wrk,excav in trench etc,

Bench Wise Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector