Latest bender Tenders | Government bender Tenders

Central Government/Public Sector

CTN :45736158

09 Jul, 2026 NA

Coimbatore - Tamil Nadu

Tender For supply of insulation monitoring relay, 415v ac, 3 phase,neutralisolated, voltage range 0-500 v ac, insulation measuring range-10 k ohm to 150 k ohm, control voltage: 24 - 240 v ac/dc,asper page no: 39, s.no.63, item code: a2 and place of installation s1a7, of bill of material of rdso spec. no. rdso/pe/spec ac/0184-2015(rev.1), used for insulation control 415 v of lhb type ac coaches, confirming to rdso spec. no.rdso/pe/spec/ac-0184-2015 (rev.1), suitable for lhb type ac coaches switch board cabinet (s1a07). accepted make: abb:cm-iws.2s.or contrel make ir 470ly-21a, ri r138 orschneider make- vigil ohm/imd-im10 or siemens make- 3ug4581-1aw31 or dold make model no il5880 or woka make or bender make. supplier should provide oem authorization or dealership certificate or proof of purchase from oem or oem authorized vendor along with supply. supplier to ensure that the offered product is supplied with valid oem`s warranty certificate. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

CTN :45416078

13 Jul, 2026 NA

Cuttack - Odisha

Tender For corrigendum : supply installation and commissioning of mechanical equipment for different govt itis and polytechnics of odisha - lathe s.s &s.c. (all geared type) , solid works , universal milling machine , powersaw machine , pipe bending machine , tool and cutter grinder , pillar type drilling machine , double ended pedestal grinder , air compressor , surface plate - granite , battery operated pallet truck , cylindrical grinding machine , radial drilling machine , absorption and stripping , equipment , shearing machine , surface grinding machine , hyadraulic surface grinding , machine , hand drill machine , horizontal milling machine , demarcation equipment , universal cylindrical grinding , machine , gear pump test rig , battery operated order picker , sensitive bench drill machine , shaping machine , hydraulic pressure testing , machine , plotter , vertical milling machine , power hacksaw machine , co-ordinate measuring machine , screw pump , breaker machine , battery operated fork lift , band saw machine , hdpe butt fusion welding machine , portable drilling machine , horizontal milling machine , turret ram milling machine , silicon carbide grinder , profile projector , slip gauge as johnson metric , set , vertical milling machine , slotter machine , hydraulic pipe bending machine , electric pressure , test pump machine

Central Government/Public Sector

CTN :45710480

17 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot miscellaneous scrap - scrap/condemned single axis 65 cnc xr tube bender m/c no. 16/5614/01. cutting and dismentling allowed.purchasers are advised to inspect the lot before bidding.

Central Government/Public Sector

CTN :45727661

07 Jul, 2026 NA

Harnaut - Bihar

Tender For supply of din rail mounted earth leakage device (residual current monitor relay) with operating voltage 12-48 v ac/dc, conforming to iec 62020-1, suitable for sbc 2 of lhb power car. make: abb(rd3m-48) or bender (rcm470ly-21) or fanox (elr-3c) only as per rcf specification edts-103 rev-d am-1. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45692570

06 Jul, 2026 5.00 Lacs

Dhubri - Assam

Tender For supply of items related to repairing and maintenance of ac on rate contract basis - pcb board out doorunit, pcb board indoor unit, out door stand, out door fan motor, indoor blower motor, coper pipe, coper pipe, remote, battery, 3pintop, pipe insulation foam tubing, air conditioner heat insulationtube,polyethylene foamtubeclosedcell retardant, pipe insulation foam tubing, air conditioner heat insulationtube,polyethylene foam tube closed cell retardant, rollingtape, 4corewire, gasr-22, gasr-32, gasr-410, compressor, compressor, compressor, sensor, sensor, ambient sensor, sensor, refrigerant leak detector, fastener nut bolt, whitecement, butanegas/lpg, coper brazing rod, capasitor, capasitor, capasitor, copernut, digitalclamp multimeter, noseplier, combinationplier, screw driver, adjustable wrench, adjustable wrench, l-key, minigas welding machine, lpg brazingtorch, swaging tool, tubecutter, tube bender, measuring tap, hummer, hummer, flashlight/hand lamp, core removetool, flaring tool kit, drillbit, charginghoser410ar32 r404a r134a, refrigerant gas chargingpipe, r-22 valve, thread seal, scale level, drill machine, tools box, tool bag

Central Government/Public Sector

CTN :45681841

29 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For insulation monitoring relay (imr) to monitor 3 phase power supply of voltage range 110 v ac, measuring range 1 - 100 k ohm, control voltage 24 - 240 v ac/dc output 1 c / 0 (spdt) contact system leakage capacitance 10 micro- farad and place of installation s1a6, as per rdso spec. no. rdso/pe/spec/ac/0184-2015 (rev.1) & bom lr.no. - el/7.1.108/mssbc dt. -17/09/2021 suitable for lhb type ac coaches switch board cabinet (s1a6). acceptable makes as per bom: abb cat.no.cm.iws.1s, schneider cat no. vigil ohm/imd-im10, siemens cat no.3ug4581-1aw31, dold cat no. il 5880.12, contrel cat no. ir 140y-4, ri-r22, woka and bender only. [ warranty period: 30 months after the date of delivery ] ]

CTN :45697944

13 Jul, 2026 75.00 Lacs

Dhanbad - Jharkhand

Tender For supply of pn or zener diode or led characteristics apparatus , verification of kcl and kvl , resistance in series and parallel apparatus , ohms law apparatus without power supply , ohms law apparatus with aluminum panel 2 digital panel meters and power supply , transistor characteristics apparatus , fet characteristics apparatus , half wave full wave and bridge rectifier apparatus , ripple factor apparatus , digital logic trainer , verification of truth table of logic gates using universal gates , flip flops using nand gates and ttl ics , four bit counters synchronous and asynchronous , four bit shift registers , encoder or multiplexer eight to one line , decoder or demultiplexer one to eight line , four bit analog to digital convertor , four bit digital to analog convertor , light intensity or phase control using scr or triac , scr commutation techniques , switching action of a bjt , single phase half wave full wave and fully controlled bridge rectifier or convertor using scrs , three phase half controlled bridge converter with r and rl load , three phase fully controlled bridge converter with r and rl load , single phase cycloconverter , instrumentation trainer using transducers , burdon tube pressure gauge trainer kit , strain gauge trainer kit with cantilever beam , lvdt trainer kit , speed measurement using photo electric and magnetic sensors , temperature sensors kit , measurement of water level using strain gauge , measurement of water level using capacitance transducer , ac servo speed torque characteristic trainer , dc servo motor speed torque characteristics trainer , stepper motor controller trainer , analog lab trainer bread board model , digital lab trainer bread board model , plc trainer , transmission line trainer abcd t and pi parameters ferranti effect load test , idmt over current relay testing kit electromechanical type , buchholz relay testing kit with compressor and oil , over voltage relay testing kit electromechanical type , over current and earth fault relay testing kit three phase static type , over current relay testing kit static type , measurement of power and power factor single phase and three phase , to study a typical bhk house wiring , four to one multiplexer and one to four demultiplexer , vapour compression refrigeration vcr test rig , water cooler setup , air conditioning test rig , domestic refrigerator , window air conditioner , split air conditioner , air cooler evaporative , tube cutter , pipe bender , flaring and swaging tool kit , reamer , brazing torch , manifold gauge set , vacuum pump , refrigerant recovery unit , refrigerant charging cylinder or electronic charging scale , refrigerant leak detector , digital clamp meter , digital thermometer , anemometer , tachometer , insulation material , refrigerants , recovery cylinders , weighing machine , electrical control panel , work benches , safety equipment

Central Government/Public Sector

CTN :44514382

27 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras corrigendum : supply of vz8100102519_cello tape_ 2inch , cvl000100590_paper tape , vz8100102518_safety goggles , rnd12w000040_small wire brush , rnd12scisr10_scissors for sheet metal cutting , vz8100102500_nose pliers , rnd12hmr0060_ball peen hammers , vz8100102501_utility knife , vz8100102058_fitter gloves , cvl000101100_masks , vz8100102517_angle grinding machine _ag 4 machine , vz8100102502_ag 4 cutting wheels , vz8100102516_ag 4 grinding wheels , vz8100102504_ag4 machine buffing wheels grit 160 , rnd12hmr0070_iron sledge hammer with wooden handle , vz8100102505_dead blow hammer with red urethane head , vz8100102506_sponge scouring pad rolls _3m scoth han , 188111770000_metal high grade engineering try square , vz8100102507_pipe bender 12mm dia , vz8100102508_cutting gloves for insulation , vz8100102509_unf 9by16inch x 18 tap set _set of 3_ h

CTN :45648517

13 Jul, 2026 NA

Kolkata - West Bengal

Tender For supply of group -1 - calibrating instrumnt_temperature sensor , group -1 - doc_calibrating instrumnt_temp. sensor , group -2 - calibrating instrument_pressure sensors , group -2 - doc_calibrating instrument_pr. sensors , group -3 - multimeter , group -3 - doc_multimeter , group -4 - clamp-on ampere meter - 500a , group -4 - doc_clamp-on ampere meter - 500a , group -5 - megger - 500-1000v , group -5 - doc_megger - 500-1000v , group -6 - thermal imager , group -6 - doc_thermal imager , group -7 - clamping tool for hydraulic hoses , group -7 - doc_clamping tool for hydraulic hoses , group -8 - electric pipe bender 0- 40mm , group -8 - doc_electric pipe bender 0-40mm , group -9 - electrical pressing unit , group -9 - doc_electrical pressing unit , group -10 - automatic halogen detectors , group -10 - doc_automatic halogen detectors , group -11 - feeler gauge , group -11 - doc_feeler gauge , group -12 - poker gauge , group -12 - doc_poker gauge , group -13 - lockers of free standing type , group -13 - doc_lockers of free standing type , group -14 - electrical test switch board , group -14 - doc_electrical test switch board

Bender Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector