Latest bending machine spares Tenders | Government bending machine spares Tenders

State Government

CTN :45520196

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33kv rewan bay with supply of material, integration and remote gateway work at 220kv ss bangra under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

State Government

CTN :45520197

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33 kv birdha bay with supply of material, integration and remote gateway work at 220kv ss birdha under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

corporations/Associations/Others

CTN :45490050

16 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

CTN :45449176

15 Jun, 2026 49.95 Lacs

Bareilly - Uttar Pradesh

Tender For supply of plastic shredder manual feeding, 6 to 8 kg per hr , weighing scale 200 kg capacity , screw type bending and heating equipment 10 to 12 kg per hr with motor, gearbox and control panel , hydraulic press , die for 150 x 150 x 40 mm paver block , die for 200 x 100 x 40 mm paver block , wet cyclone scrubber with ducting and blower , containerized setup 20x8 with electrical fittings , commissioning of machines including logistics , consultancy fee

State Government

CTN :45412896

11 Jun, 2026 NA

Bhubaneswar - Odisha

Tender For request for proposal (rfp) for selection of firm / company for supply, installation, testing & commissioning of tools, equipment and consumables addressable fire alarm control panel , addressable smoke detector with base , addressable multisensor detector with base , addressable heat detector with base , addressable manual call point (mcp) , addressable audio-visual strobe , addressable input/output module , addressable isolator module , addressable control module , addressable monitor module , addressable repeater panel , addressable zone module , programming software & license , programming tool / interface , laptop for programming , loop simulation / fault kit , wooden wiring cubicle with metal framing , 18v brushless cordless jigsaw machine , heavy duty cable cutter , cable insulation remover , deburring tool , spirit level 1200mm , precision screwdriver set , quick/trigger clamp , step bit , hole saw , tubular crimping tool , magnetic wrist belt , , , tool belt , tool trolley , non contact tachometer , phase sequence meter , , , 3-phase multifunction meter , squirrel cage induction motor with mechnical loading (break drum type) , single phase induction motor including centrifugul switch along with starting and running capacitor , soft starter for motors , dol starter , star delta starter , power quality meter , upgraded fault simulator , 5 pin industrial plug and socket , spirit level , pipe cutter (plastic) , plastic rounder , plastic pipe chamfer , external bending spring , external bending spring , internal bending spring , internal bending spring , crimping tool , over head shower with shower arm 300 mm , thermostatic mixing valves , digital inclinometer , copper tube bender , , rothenberger standard bender , rothenberger robend 4000 set , portable hand held electric pipe threading machine , hdpe butt fusion machine , co2 cylinder with gas , co2 regulator with preheater , vfd , inverter , vibration meter , thermal imager/thermographic camera , lokring joint complete set , inverter pcb testing jig , thermostat , varistor , power relay , rectifier

CTN :45416078

30 Jun, 2026 NA

Cuttack - Odisha

Tender For supply installation and commissioning of mechanical equipment for different govt itis and polytechnics of odisha - lathe s.s &s.c. (all geared type) , solid works , universal milling machine , powersaw machine , pipe bending machine , tool and cutter grinder , pillar type drilling machine , double ended pedestal grinder , air compressor , surface plate - granite , battery operated pallet truck , cylindrical grinding machine , radial drilling machine , absorption and stripping , equipment , shearing machine , surface grinding machine , hyadraulic surface grinding , machine , hand drill machine , horizontal milling machine , demarcation equipment , universal cylindrical grinding , machine , gear pump test rig , battery operated order picker , sensitive bench drill machine , shaping machine , hydraulic pressure testing , machine , plotter , vertical milling machine , power hacksaw machine , co-ordinate measuring machine , screw pump , breaker machine , battery operated fork lift , band saw machine , hdpe butt fusion welding machine , portable drilling machine , horizontal milling machine , turret ram milling machine , silicon carbide grinder , profile projector , slip gauge as johnson metric , set , vertical milling machine , slotter machine , hydraulic pipe bending machine , electric pressure , test pump machine

corporations/Associations/Others

CTN :45386360

08 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeter width- 700 milimeter height 1800 milimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions. colour:- green paint finish- power coated, uv resistant paint coating thickness (min) 100 micrometer warranty 3 years. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge. , providing and fixing of leg press leg shaper complete in all respects having following specifications. a) all pipes should used in the equipments should be galvanised with 3mm thickness. b) multi colour powder coating with polyster paints should be used on all the equipments. c) the foot pedal on all the equipments should be of aluminium only. d) the seats should be made of high quality plastic with colour scheme in yellow or orange. e) the high end bearings such as skf/nbc must be used in all the equipments. 1 dimensions- 1730*450*1450mm 2 colour- customizable multi colour and complete powder coat 3 size of main tube-114*3.75mm steel pipe 4 size of supporting tube-76*3mm steel pipe 5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck. 6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater 7 anti-skid components are used at the pedal parts. 8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck 9 anti theft cover is made by stainless steel/high quality plastic. 10 thickness of bearing bracket is no less than8mm 11 hazardous materials like coating agent, rubber are under national newest standard. functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge. , providing and fixing of parallel bars size/dimensions length- 900 millimeter height 800 millimeter material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure s

State Government

CTN :45361263

11 Jun, 2026 NA

Bhubaneswar - Odisha

Tender For supply, installation, testing & commissioning of tools, equipment and consumables for school of engineering - addressable fire alarm control panel, addressable smoke detector with base, addressable multisensor detector with base, addressable heat detector with base, addressable manual call point (mcp), addressable audio-visual strobe, addressable input/output module, addressable isolator module, addressable control module, addressable monitor module, addressable repeater panel, addressable zone module, programming software & license, programming tool / interface, laptop for programming, loop simulation / fault kit, wooden wiring cubicle with metal framing, 18v brushless cordless jigsaw machine, heavy duty cable cutter, cable insulation remover, deburring tool, spirit level 1200mm, precision screwdriver set, quick/trigger clamp, step bit, hole saw, tubular crimping tool, magnetic wrist belt, tool belt, tool trolley, non contact tachometer, phase sequence meter, 3-phase multifunction meter, squirrel cage induction motor with mechnical loading, break drum type), single phase induction motor including centrifugul switch along with starting and running capacitor, soft starter for motors, dol starter, star delta starter, power quality meter, upgraded fault simulator, 5 pin industrial plug and socket, spirit level, pipe cutter, plastic), plastic rounder, plastic pipe chamfer, external bending spring, external bending spring, internal bending spring, internal bending spring, crimping tool, , over head shower with shower arm 300 mm, thermostatic mixing valves, digital inclinometer, copper tube bender, rothenberger standard bender, rothenberger robend 4000 set, portable hand held electric pipe threading machine, hdpe butt fusion machine, co2 cylinder with gas, co2 regulator with preheater, vfd, inverter, battery charger indicator, multimeter, clamp meter, earth resistance tester, potentiometer, voltmeter, micron vacuum gauge, all weather air conditioner, 4- way reversing valve, open pcb of outdoor unit of inverter type air conditioner, advanced leak detector, portable oscilloscope, contact tip 1.2mm, gmaw nozzle, mig wire spool, 1.2mm, dye penetration test kit, fcaw wire spool, 1.2mm, wraping foil for wire roll, mesh cable tray, mesh bracket support , l type, mesh bracket support , c type, mesh tray nut bolt coupler, pvc trunk (mms), pvc trunk (mms), pvc casing caping (mms), pvc casing caping (mms), pvc conduit (mms), pvc conduit (mms), gi washers, self threaded screw, din rail, race way ( small holes ), pvc cable, pvc cable, pvc cable, pvc cable, pvc cable, pvc cable, pvc cable, pvc cable, pvc cable, pvc cable clip, pvc wire, tubular lug, angle holder, cable tie mounts, modular box, modular plate, intermediate switch, bell push switch, pg pvc gland, masking tape, masking tape, control panel, surface light, pvc conduit male & female adapter, distribution board, r 600a refrigerant gas can, lithium-ion battery, lead acid battery, pcb, verrow board, resistor, resistor, zener diode, diode, transistor, transistor, transistor, transistor, capacitor, capacitor, capacitor, capacitor, voltage regulator ic, step down transformer, ups battery, ni-mh battery, led, smd led strip, led lamp, heat sink, dc -dc led driver, switch, test switch, teflon tape, programming cable, batteries for panel, cpvc pipe – 20 mm, cpvc pipe – 25 mm, cpvc 20 mm elbow 90°, cpvc 25 mm elbow 90°, cpvc 20 mm tee, cpvc 25 mm tee, cpvc 25×20 mm reducer coupler, cpvc 25×20 mm tee, cpvc 20 mm coupler, cpvc 25 mm coupler, cpvc union 20/25 mm, cpvc reducer 25×20 mm, cpvc mta, cpvc mta, cpvc fta, cpvc fta, cpvc tank connector, cpvc 20 mm end cap, cpvc 25 mm end cap, thread seal tape, cpvc solvent cement, cpvc brush set, pex-al-pex pipe, pex-al-pex pipe, pipe clips / supports, pipe clips / supports, fitting holding clamps, fitting holding clamps, equal tee (pushfit type), equal tee (pushfit type), reducing tee (pushfit type), reducing tee (pushfit type), female tee (push

CTN :45304567

08 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od b g.i pipe. seat rest pipe 42 mm od b class g.i pipe. handl

corporations/Associations/Others

CTN :45277495

28 May, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

Bending Machine Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

State Government

corporations/Associations/Others

State Government

corporations/Associations/Others