Latest benjo bolt Tenders | Government benjo bolt Tenders

Central Government / Public Sector

CTN :45388265

22 Jun, 2026 NA

Panipat - Haryana

Tender For corrigendum : supply of hora make spare - hora,1632-39,dn 8"/14",pilotsystem,stem, hora,1632-39,dn 8"/14",gasket,id:104371, hora,1632-39,dn 8"/14",seat ring, hora,1632-39,dn 8"/14",gasket,id:105835, hora,1632-39,dn 8"/14",gasket.id:104377, hora,1632-39,dn 8"/14",stem pkg 4 rings, hora,actuator,guidance pa-n 2160 cpl.t, hora,actuator,guidance pa-n 2160 cpl, hora,actuator,guidance pa-n 300 cpl., hora,actuator,guidance pa-n 540, hora,actuator,guidance pa-n 540-60, coupling bolt & nut set

Central Government/Public Sector

CTN :45561590

23 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap and unserviceable condemned mix m.s. such as m.s. controll ring, coller housing and bolt, locking plate,end shild,belt tention device, rods,nut , elbow, t joint, check nut, coupling, bolts,wra spares, ms armature, tention vice,stay, hmv, amv, rod, suspention box,bearing distance plate, channel angel allean bolt,connecting rod,lower spring liner, crack shaft,shacko coupler parts, isolating cock, ms studs,hanger pin, ms pin and ,ms avm, shacu coupler, consisting valve, ms rear cover, various types of misc.mix m.s. parts with rubber,plastic, fiber , cotton etc sort and sizes.(qty approx) (note if found any non-ferrous item will not be delivered)

Central Government/Public Sector

CTN :45550818

06 Jul, 2026 NA

Harnaut - Bihar

Tender For supply of a set of metal threaded end fitting of size pg 29 of annexure a (table a 2 item no 6) with hexagonal lock nut of nickel plated brass thread size pg 29(table a10 item no.6) with gasket and o ring conforming to rdso specification no. rdso/pe/spec/ac-0138-2009(rev-1).all are in assembled condition. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45567199

25 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of straight metric metal thread end fitting suitable to conduit size nw 23 thread having thread size m25 x 1.5 with hexagonal metric lock nut made of nickel plated brass of size m25 x 1.5 with suitable o-ring and washer confirming to rdso specification no. rdso/pe/spec/ac/0138 -2009 (rev.1) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45147651

25 Jun, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : supply of sector plate hot end (primary to secondary) for αρη τυρε 27.5 vimt 2000 sector plate hot end (gas to primary) for aph type 27.5 vimt 2000 sector plate hot end (gas to secondary) for aph type 27.5 vimt 2000 sector plate cold end (primary to secondary) for αρη τυρε 27.5 vimt 2000 sector plate cold end (gas to secondary) for aph type 27.5 vimt 2000 sector plate cold end (gas to primary) for aph type 27.5 vimt 2000 static seal assembly (hot end + cold end) for aph type 27.5 vimt 2000 radial seals (hot & cold ends) for air preheater 27.5 vimt 2000 by-pass seals for air preheater 27.5 vimt 2000 steam soot blower nozzle for apη τυρε 27.5vmit 2000 , over running clutch assembly for guide trunnion with bolts air preheater 27.5 vimt 2000/over running clutch fso-400 for aph type: 27.5 vmit 2000 fixing pin as per drg. no. 4-55-335-00983 p.a fan ap2-17/12 for unit no 3 & 4 of sikka tps rectangular ring as per drg no. 0-55-334-00661 for pa fan ap2-17/12 for unit no 3 & 4 of sikka tps cylindrical helical spring as per drg no. 4-55-214-00246 for p a fan ap2-17/12 for unit no 3 & 4 of sikka tps cheese head bolt m 16x50 as per drg no. 0-55-334-00661 for pa fan ap2-17/12 for unit no 3 & 4 of sikka tps nut as per drg. no. 4-55-335-00993 for pa fan ap2-17 /12 for unit no 3 & 4 of sikka tps bearing cover assy as per drg no. 0-55-335-00619 for pa fan ap2-17/12 for unit 3&4 of sikka tps distance ring as per drg no. 4-55-335-00859 for pa fan ap2-17/12 for unit no 3 & 4 of sikka tps sealing ring as per drg. no. 3-55-335-00651/01 for pa fan ap2 17/12 expansion delivery side drg no. 3-55-334-00673 for pa fan ap2-17/12 for unit 3&4 of sikka tps split thrust coller as per drg no. 2-56-134-01102 for id fan ndzv 33 sidor for unit no 3 & 4 of sikka tps end closure kit as per drg no:3-56-135-00911 for for id fans ndzv 33 sidor for unit no 3 & 4 of sikka tps. circlip sb 26, blade bearing assembly of forced draft fan tyρε αρ1 18/11 , hfo oil gun nozzle spray plate 90-j16 i,rsb traviirsii csain assiimbly radial brg 200fxm85 skf-61840 of hydraulic turning motor, item no. 6, drg-11150146000/6 for 250 mw of sikka tps unit no. 3&4. sleeve of hydraulic turning motor, item no. 9, drg νο. 11150146000/9 for 250 mw of sikka tps unit no. 3&4. shaft b48x44 of hydraulic turning motor, item no. 3, drg no. 11150146000/3 for 250 mw of sikka tps unit no. 3&4. shaft nut of hydraulic turning motor, item no. 11, drg no. 11150146000/11 for 250 mw of sikka tps unit no. 3&4. lock washer dia 55 skf-mb1155 of hydraulic turning motor, item no. 12, drg no. 11150146000/12 for 250 mw of sikka tps unit no. 3&4. ring of hydraulic turning motor, item no. 10, drg no. 11150146000/10 for 250 mw of sikka tps unit no. 3&4. scru cap soc a12.9 m10x75 of hydraulic turning motor, item no. 19, drg no. 11150146000/19 for 250 mw of sikka tps unit no. 384. scru cap p-8.8 m12x90 of hydraulic turning motor, item no. 20, drg no. 11150146000/20 for 250 mw of sikka tps unit no. 3&4. throttle valve of hydraulic turning motor, item no. 22, drg no. 01165524000/22 for 250 mw of sikka tps unit no. 3&4. scru cap p-8.8 m20x60 of journal bearing no. 2, item no. 16, drg no. 01170318000/16 for 250 mw of sikka tps unit no. 3&4.

State Government

CTN :45552532

17 Jun, 2026 9.90 Lacs

Banswara - Rajasthan

Tender For hand pump spare parts purchase at ps sajjangarh - "cylinder bodychain with couplingreducer capaxle (steel)bearing 6204leather washerhacksaw bladepedestalgrease 1 kgplunger rodplunger yoke body (gm)upper guide (gm)check valve guide (gm)check valve seat (gm)plunger (gm)check valve return seat (gm)handleheadconnecting rodwater tankbrass linerspacer (gm)nut-bolt12 x 1.75 x 40mm""nut-bolt (4/(4 + 1)) 12 x 1.75 x 40 mmiii platerod socketrubber sheet (large)-rubber sheet (small)-sealing ringgi pipe 32mm 3 meters-pipe vice 1 (unicef type)rod vice (unicef)pipe lifter 32mm5spanner 24"" (pipe wrench)5spanner 12"" (pipe wrench)3spanner 17 x 19 (fixed)-spanner 17 x 19 (ring)round die 12.5mmdie handle2hammer 1 kg3chiselpipe dierod lifter"

Central Government/Public Sector

CTN :45559549

25 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For supply of m1060100280-industrial oxygen gas 99 percentage pure is 309 , hydrostatic stretch test , cylinder valve , spindle replacement , gland nut , degreasing and painting , cylinder cap , neck ring , bottom ring

Central Government/Public Sector

CTN :45318486

22 Jun, 2026 3.13 Crore

Dipka - Chhattisgarh

Tender For corrigendum : supply of pump shaft 40 c8 part no f59751 or equivalent f59751 or equivalent , key pump half coup. part no f59752 or equivalent , oil seal for bearing cover at d.e. part no f59753 or equivalent , hx hd cap screw part no f59754 or equivalent , bearing cover d.e. part no f59755 or equivalent , bearing housing d.e. part no f59757 or equivalent , stuffing box cover d.e. and n.d.e. part no f59759 or equivalent , water seal tube part no f597511 or equivalent , key for impeller 1st stage part no f597514 or equivalent , clinch fitiing part no f597513 or equivalent , impeller 1st stage f597515 or equivalent , wearing ring casing part no f597516 or equivalent , inter stage bush part no f597517 or equivalent , dowel pin int stage bush part no f597518 or equivalent , inter stage sleeve part no f597519 or equivalent , key for impeller 2nd stage part no f597520 or equivalent , impeller 2nd stage part no f597521 or equivalent , shaft sleeve part no f597522 or equivalent , stuffing box bush part no f597523 or equivalent , water seal ring part no f597525 or equivalent , o ring shaft to shaft sleeve part no f597526 or equivalent , split gland assy. part no f597527or equivalent , water thrower part no f597529 or equivalent , oil seal for bearing housing part no f597530 or equivalent , grease nipple bearing housing part no f597531 or equivalent , pipe plug for vib and temp at brg. hsg. part no f597532 or equivalent , bearing housing n.d.e. part no f597533 or equivalent , bearing cover n.d.e. part no f597535 or equivalent , lock nut for brg. part no f597536 or equivalent , lock washer for brg part no f597537 or equivalent , grease relief fitting for brg hsg part no f597538 or equivalent , shaft collar part no f597539 or equivalent , sleeve nut n.d.e. part no f597540 or equivalent , pipe nipple gland drain part no f597541 or equivalent , sleeve nut d.e. part no f597550 or equivalent , spr dowel sleeve part no f597553 or equivalent , pipe plug gauge and air vent part no f597555 or equivalent , eye bolt part no f597556 or equivalent , priming plug part no f597557 or equivalent , clinch fitting part no f597559 or equivalent , fourway adoptor part no f597560 or equivalent , stud bolt nut and washer stfng box cshng part no f597510 or equivalent , stud bolt with nut part no f597528 or equivalent , rotating assembly part no flrauf5975ds or equivalent //bid details 2 / 44

State Government

CTN :45555143

17 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For procurement of various critical spares of air preheater for unit no.3 coh at cstps, chandrapur. - aph centre section of air seal housing, guide bearing housing, blr regah 0 0 guide brg trunion, spool seal assembly ring, diaphragm he & ce, trisector 27vi t 80in soot blowr nozzles, blr regah 0 0 adopt slev, oil cooler for air preheater lub oil sys, blr aph guide tranion sealing sleeves du, reg aph shim assly for modified guide br, carbon ring with tension spring, axial seal plate adjuster stud, trisector 27 vi traking rod assy, blr regah 0 0 lock nut, m 39x175-3mm pitch, blr regah 0 0 shim pack, barco swivel ball joint for cleaning dev

corporations/Associations/Others

CTN :45532876

27 Jun, 2026 NA

Kolkata - West Bengal

Tender For renovation and replacement of damaged and worn out spare parts with new ones for sludge pump-1 with ancillary works at wtp-iv, garden reach water works.- manufacturing, supply & delivery of pump - shaft made off ss-316 for 647 cum/hr., 15 mtrs head sludge , pump with necessary keys etc, as per sample at garden reach water treatment plant., , manufacturing, supply & delivery of shaft -sleeve, , made of ss-316 for 647 cum/hr., 15 mtrs head sludge, , pump as per sample at garden reach water, , manufacturing, supply &delivery of casing ring made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufacturing, supply &delivery of split gland made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufactering, supply delivery of baaring housing made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufactering, supply delivery of lock nut of impeller made of ss for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufactering, supply & delivery of lock nut of bearing made of ss for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , balancing of rotating assembly of 647 cum/hr., 15 mtrs head sludge pump including loading, unloading and transportation from and to at garden reach water treatment plant, , total rotating assembly & keep it at a suotable place after opening the top cover of pump unit. dismantling the bearing housing at both end & as per direction of eic., , manufacturing, supply & delivery of impeller made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufacturing.. supply delivery of bearing housing cover (d.e side) made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufacturing, supply &delivery of bearing housing cover (n.d.e side) made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at tp-1, grww. garden reach water treatment plant, , manufacturing, supply &delivery of supporting foot made of nici for 647 m?/hr., 15 mt head sludge pump as per sample at garden reach water treatment plant., , m.s plate as per is: 2062-2011/latest revision, make: sailitataijindal (b) above 2 mm upto 10 mm thickness, , fabricating m.s. specials of different diameter in shop out of 8 mm to 12 mm thick m.s plates supplied depart-mentally, cutting the plates to exact size & shape by gas cutting device and/or by adopting any other approved type of mechanical means, bending the same in true curvature by template and rolling machine of approved design including proper marking, levelling joints followed by electric arc welding - longitudinal and circumferential, as necessary, using standard electrodes as per i.s.specification including edge preparation, electricity charges and hydraulic testing of the fabricatedpiece all complete as per specification and direction of the engineer-in-charge. [the engineer-in-charge shall approve the electrodes for are welding before use. fabrication of m.s. flange to form m.s flanged tail piece shall not be considered as m.s. special], , cutting to requisite length or shape departmental r.s. joists, channels, angles, tees, plates etc. (payment to be made on area of cut surface), , welding in m.s. structural work with gas or electric: (a) tack weld, , welding in m.s. structural work with gas or electric: (b) continuous weld., , supply of m.s. flange (slipper type) as per is-6392 table 17 thickness 12mm nb diameter in mm 350, , flange joint to c.i./d.i/ms. pipes and specials including supply of rubber gasket, nuts, bolts, washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the engineer-in-charge. di

Benjo Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors