Latest bentonite Tenders | Government bentonite Tenders

CTN :40241120

28 May, 2025 NA

Hooghly - West Bengal

Tender For supply of specified and as directed. , m and l sand cushioning dry in trenches for protection of ug cables below above and around the ug cable , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 80 mm bore dia , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 50 mm bore dia , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 100 mm bore dia , m and l for boring of horizontal hole under road pavement hardstanding suitable for passing through up to 80 mm bore , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 4 x 1016 sqmm , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 4 x 2550 sqmm , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 x 70150 sqmm , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 25 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 50 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 100 mm bore dia , material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm , dismantling existing lt panels of any type any size carefully for reuse including necessary excavation demolition of concrete disconnecting of earthing cable , labour only for disconnecting isolating and taking out burned unserviceable lugs switchgear metering devices wiring bus bar etc , supply only the followings to be incorporated against item no 30.00 and 31.00 only 06 sqmm to 16 sqmm , 25 sqmm to 50 sqmm , 70 sqmm to 95 sqmm , 120 sqmm to 240 sqmm , epoxy type insulator upto 1100volt for lt panel bus bar including nut bolts etc. , single core stranded copper conductor frls of size 16 sqmm including copper lugs at both ends , single core stranded copper conductor frls of size 10 sqmm including copper lugs at both ends , aluminium busbars electrolytic grade of as per site required amps and ka rating bus bars with ryb and black colour coding including drilling cutting , s and f of framed work as in doors or gates of angle or other section with gusset plates rails braces etc. complete drilled for fixing of steel sheeting or other covering. doors etc. , m and l for cross arms bracings supports clamps and back plates fabricated from structural steel sections includings nuts bolts washers welding , m and l for cement concrete 136 type c2 using 40mm graded crushed stone aggregate as in pole foundation filling and mass concrete complete all as specified , m and l for cement concrete 124 type b1 using 20mm graded crushed stone aggregate as in coping of pole including weathering slightly rounded , m l brick work with flyash bricks old size straight or curved on plan to any radius exc 6m mean radius build , m and l for 15mm thick in cm 14 rendering on brick or concrete surfaces finished fair and even on wall complete all as specified and directed. , m and l for hardcore of gauge n exc. 63 mm deposited spread and levelled in layers n exc. 15 cm thick watered and rammed to a true surface as specified and directed. , m and bid details/ 2 / 38 l ss pasivated screw bolts machine made with hexagonal head at one end and screwed the other ends each screwed end to be fitted with washers and one hexagonal nut diameter , m and l for preparation of existing surface of lt panel by srapping down peeled off old paint cleaning etc and applying two coat of siemens

Central Government/Public Sector

CTN :40254162

27 May, 2025 NA

Bokaro - Jharkhand

Tender For supply of requirement of bentonite powder

Central Government/Public Sector

CTN :40118559

09 May, 2025 3.87 Crore

Panipat - Haryana

Tender For corrigendum : providing of handling and transport on lumpsum basis - transportation contract for supply of bentonite sulphur from panipat unit

State Government

CTN :40172847

14 May, 2025 NA

Mandla - Madhya Pradesh

Tender For building materials and stores for purchase of perishable materials and other -group 1 building materials etc. a cement ppt 53 grade a, sintered brick, sand narmada river / mahanadi, stone dust, bhasua sand (12 mm), granite (20 mm), granite (40 mm), brick laying machinery (9 x 9 cm), kota stone (25 mm), granite stone, top quality materials etc. have been used in construction work in the field of cement, tin, stone aggregate, gravel (600 x 600 mm) 9.10 mm, top quality materials etc. have been used in construction work in the field of cement, tin, stone aggregate ... those who want to buy these cars will have to face less than one hour of heavy workload; the price of which is 600x600 mm, will be increased to 9.10 mm. in this case, the equipment at the same time will be used to provide relief in the loss of life; the price of which is 300x300 mm, will be used to provide relief in the loss of life; the price of which is 300x300 mm, will be used to provide relief in the loss of life. 600x600 mm after 9.10 mm) stainless steel rods (special purpose) group 2. iron bars a iron 16 mm (16 in.) (1.5 mm), iron 12 mm (16 in.) (1.5 mm), iron 10 mm (16 in.) (1.5 mm), iron 8 mm (16 in.) it is a cast iron article having g.i.l., g.i., g.i.t. group 3 steels and profiled sheets with necessary screw welding and complete fittings. 14g 3.5a pap bmtgppimk 0.50g 12g 3.5a pap bgtm 0.50g 4 ? ????? ???? 6 ? ????????????? ????? ???????? ???????? 100 ?? ???? ???? 100 ?? ????? ???? 100 ??; heat the humidifier at 1 degree celsius. heat the humidifier at 4 degree celsius. heat the humidifier at 20 degree celsius. heat the humidifier at 1 degree celsius. heat the humidifier at 4 degree celsius. heat the humidifier at 20 degree celsius. heat the humidifier at 1 degree celsius. spajmat chambapadah .epand jtambajvatae mdanumas thasnam champadajh 4 spajmat chambapadah .epand jtambjavatae mdanumas thasnam champadajh 20 spajmat chambapadah .epand jtambajvatae mdanumas latmamad champadajh 1 spajmat chambapadah .epand ?????????? ????????? ????? ?????? ???????? 4 ??????? ????????? .epand in the same way, the husband is so much in need of lime that he is the main nitrate maker (the owner of the lime) in the same way, the lime is the main nitrate maker, the nitrate maker is the main nitrate maker, the nitrate maker is the main nitrate maker, the nitrate maker is the main nitrate maker, the nitrate maker is the main nitrate maker, the nitrate maker is the main nitrate maker. the amount of the item in the register is mentioned in the table below: the amount of the item in the register is mentioned in the table below: 1. as per the standards set by the weights and measures department 2. as per the standards set by the weights and measures department 3. as per the standards set by the weights and measures department 4. as per the standards set by the weights and measures department 5. as per the standards set by the weights and measures department 10. as per the standards set by the weights and measures department 15. as per the standards set by the weights and measures department (x, x, y) (instructions) group 5 electrical materials a 12 developed materials 6 developed materials 6. a box 10. a box 12. a box 16. i a box 25. i and tham sanjwat, pdp 5 pdp 2 pdp 16. i and tham sanjwat 16. 1.5 cms cms 1.5 cms cms 1.5 cms cms 1.5 cms cms 1.5 cms cms 1.5 cms cms 1.5 cms cms 1.5 cms cms 1.5 cms cms 10 cms cms 12 cms 6 cms cms 1.5 cms 12 english 18 english 25 english 25 english 25 english 25 english 25 english 25 english 25 english 25 english 25 english jnimaspahij 18 quantities (in hindi, cold storage, sale) small aquariums 32 quantities (in hindi, cold storage, sale) small aquariums collection 50 quantities (in hindi, cold storage) small aquariums collection 100 quantities (in hindi, cold storage) 50 quantities (in hindi, cold storage) 50 quantities (in hindi, cold storage) 60 quantities (in hindi, cold storage) , group 6 sanitary materials a-tube 500 gms, 1 gms 3/4 gms 1 gms 2 gms

corporations/Associations/Others

CTN :40205566

09 May, 2025 17.00 Lacs

Jhansi - Uttar Pradesh

Tender For supply of material 500 bedded medical college jhansi - supply of material, earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by engineer-in- charge:, 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete., r.c.c. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in column excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also inclduing supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being included in this item, rcc work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also inlcuding supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being inlcuded in the item., class-150 brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work., r.c.c. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in foundation excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also inclduing supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being included in this item, class-150 half brick work in 1:4 cement and coarse sand mortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.including suply and wastage & overlapping.thermo-mechanically treated bars of grade fe-500d or more., 15 mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement: 6 coarse sand), providing and fixing 1mm thick m.s. sheet door with frame of 40x40x6 mm angle iron and 3 mm m.s. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. using m.s. angels 40x40x6 mm for diagonal braces, providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete., one priming coat & one coat oil distemper on new work inlcuding supply of all materials. labour and t&p etc. required for proper completion of the work, painting or varnishing or iron works in small areas with one coat of ready mixed in priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and t&p etc. required for proper completion of work paint to be used should confirm to the i.s.i. no. 103 1950, finishing walls with acrylic smooth exterior paint of required shade: - new work (two or more coat applied @ 1.67 ltr./10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm., kota stone slabs 20 mm thick in risers of steps, skirting, dado and

CTN :40212608

08 May, 2025 4.99 Lacs

Multi City - Andhra Pradesh

Tender For nstphes- procurement of electrical consumables for regular maintenance works at nstphes, satrasala - lighting material , 400w hp metal halide lamp, tubular, base screw type , ballast copper 250w hpsv make bajaj , lamp,hid, type:hpsv bulbs (tubular),power:250 w, , power terminal blocks r y b 63 a 4 way tpn connector , preventor single phase ubder voltage and over voltage cut out make minilecmdl hlsd2 415v , tube light along with side holders, led, 4 feet, 20w, 50hz with 5k surge and as per lm80 test report from led chip manufacturer.and as per is16101,iec60598, ie62560:2011 , tube light electronics ballast harmonics- 10w make bajaj eb for 1x36 or 40 w 240v ac 50 hz, pf greater than 0.90 , lamp 36 watts cfl bulb pin type 2x18 w , 2 feet x 2 feet 36 watt cleanary elate recess mounted led luminiaries make panasonic bajaj crompton wipro , miniature circuit breaker rated current 32 a 230v ac number of poles 1 any standard make , socket electrical type power current 16 a number of pins 5 switch cum socket , miniature circuit breaker rated current 6a number of poles 1 any standard make , miniature circuit breaker rated current 20 a number of poles 1 230 v ac 50 hz make any standard make , miniature circuit breaker , mccb 100a 3 pole any standard make schneider or l and t , three pole mcb 40 amps 415 v breaking capacity 10 ka any standard make , street light timers general industrial controls private limited type qt 240 v ac, 50 or 60 hz contact rating 16 a 250 vac analog time switch fm 1 quartz , mcb 3 pole 32 a 415 v ac, any standard make , capacitors 2.5 mfd , rubber compound tape 16 ft thickness 8mm colour black note 1 no denotes 1 piece , insulation tape , led street light 120 w 240 v ac make crompton bajaj goldmetdal wipro philips , 90 w led street light luminaire , led street light fitting 30w make crompton bajaj goldmedal wipro philips , bentonite compound f/ earth pit , crystal salt of good quality kg per bag , char coal f/earthpits note 1 no denotes 1 kg , 60 w 230v dc screw type holders filament lamps make any standad

Central Government/Public Sector

CTN :40232208

11 Aug, 2025 NA

Kalka - Haryana

Tender For supply of bentonite for use in foundry specification : - to is 6186:1986 (reaffirmed 2024) t ype -2, grade - a. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40214288

21 May, 2025 NA

Thanjavur - Tamil Nadu

Tender For provn of pol store at afs thanjavur - surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and as directed. excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manhole, pier holes, etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. description all as per srl item no 3 here-in-before but depth exc 1.50m but not exc 3.0m complete all as specified and as directed. m&l pcc 1:4:8 type d-2 (using 40mm graded stone agg) as in foundation, filling and mass concrete complete all as specified and as directed. m& l brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and as directed. m&l mild steel tmt bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. description all as per srl item no 7 here-in-before but for 6mm to 8mm dia complete all as specified and as directed. description all as per srl item no 7 here-in-before but for 5mm dia and over and including 10mm dia in stirrups spacers and binders complete all as specified and as directed. m&l rcc m-25 (using 20 mm size graded stone aggregate) as in foundation, including rafts, footings, foundation beams; plinth beams; bases for coloumns, etc basement slabs under reamed piles and mass concrete complete all as specified and as directed. m&l rcc m-25 (using 20 mm size graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed. m&l rcc m-25 (using 20 mm size graded stone aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. m&l rcc m-25 (20 mm graded stone aggregate) as in chajjas complete all as specified and as directed. m&l rcc m-25 (20 mm graded stone aggregate) as in beams, cantilvers, bressummers, lintels over 1.5m span complete all as specified and as directed. use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished complete all as specified and as directed. use and waste of formwork to sides of pillars posts, struts, piers, columns and stanchions finished the suface rough complete all as specified and as directed., use and waste of formwork to sides and soffits of floors or roof beams, beams haunchings, girders,bressummers lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc rough finished complete all as specified and as directed. use and waste of formwork to chajjas, troughts and similar items including edges rough finished complete all as specified and as directed. m&l form work with fair finished surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work nexc 200mm thick (horizontal or sloping) complete all as specified and as directed. supply only water proofing compound complete all as specified and as directed. s&f framed work as in door or gates of angle or other section with gusset plate, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. doors to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing confirming to fe-410-w (gde e-250) quality "a" complete all as specified and as directed. s&f framed wor

CTN :40211480

17 May, 2025 50.00 Lacs

Unnao - Uttar Pradesh

Tender For tender for supply of 1 hp submersible pump with tank pvc etc - cartage of material up to site all complete. , s/o 110 mm pvc pipe 10 kg isi mark all complete. , s/o hdpe submersible roll pipe 30 meter complete with safety wire isi mark all complete. , cutter coupler set , boring cap complete. , s/o submersible pump set 1 h.p complete with cable 2.5 mm 40 mtr all complete isi mark. , s/f of starter complete for 1 h.p. submersible all complete isi mark. , making pit & tripod for boring work with t&p etc all complete. , boring work all complete with tools. , 0 to 15 rmt , 15 to 30 rmt , 30 to 45 rmt , lowering of pvc pipe 110 mm 10 kg isi all complete. , lowering of submersible pump set 1 h.p all complete with 32 mm. , s/o bentonite powder etc all complete. , development of bore all complete. , disinfection by bleaching powder all complete. , embossing work all complete , supply & fixing of pvc tank isi mark 500 litre all complete. , construction of 18 rcc pillar height 2 mtr for tank 500 litter on top & roof , boring chamber and cover all complete with tiles and customized granit engraved inauguration stone , s/ fixing of upvc pipe 1 3/4 1/ under ground up to 30 mtr and 2 no taps , gate valve as per site situations complete platform for drinking water floor white washing with labour material all complete , making connection of electricity from nearest pole with labour material all complete , water testing.