Latest beveling machine scrap Tenders | Government beveling machine scrap Tenders

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

Central Government And Public Sector

CTN :45280929

01 Jun, 2026 NA

Dibrugarh - Assam

Tender For supply of allen key 8 mm , allen key 10 mm , allen key 22 mm , slugging wrench , slugging spanner , reversible ratchet handle half inch , reversible ratchet handle three fourth inch , torque wrench , outside micrometer , soft face hammer 40 mm with steel handle , center punch , straight air drill machine , air grinder , measuring tape , tungsten rotary cutter 6x5mm , tungsten rotary cutter 6x13mm , tungsten rotary cutter 6x10mm , flat file , half round file single cut grades of cut second , half round file single cut grades of cut bastard , half round file double cut grades of cut second , half round file double cut grades of cut bastard , needle file , cutting wheel , grinding wheel or dc wheel , gas cutting torch , welding rod ms 7018 36 h , welding rod ss 308 , welding rod ss 309 , emery paper grade 120 , emery tape fine grade , cleaner , developer , penetrant , rustolene rust disintegrator , wire brush , tefflon tape , tig electrode , air hose pipe wire embadded , masking tape 50 mm , ss wire 1.6mm , ss wire 2.4mm , masking tape 75 mm , half inch impact hexagon bit socket 6 mm drive , half inch impact hexagon bit socket 8 mm drive , half inch impact hexagon bit socket 14 mm drive , half inch impact hexagon bit socket 17 mm drive , size 19mm three fourth inch drive socket 12 point , jack up bolt m10 x 150mm , jack up bolt m12 x 150mm , jack up bolt m16 x 150mm , buff flap wheel , 11mm deep socket 6 point , combination plier , circlip plier set , hydraulic hand pump , hydraulic jack button type , hydraulic jack with hand pump , air micro grinder 120 degree angle grinders 3 collet , air micro grinder 90 degree angle grinders 3 collet , curbide rotary burrs 5x10 mm , curbide rotary burrs 3x15 mm , oil stone size 150mmx50mmx25mm fine grade , klinger gasket 1.5mm, non metallic , tinsnips , cylindrical grinding stone 10x20 mm , taper grinding stone 10x20 mm , taper grinding stone 21x50 mm , cylindrical grinding stone 20x50 mm , chain hoist , triple boiled linseed oil sealing compound , premium polyester rope , dowsil rtv sealant 736 , pneumatic connector with coupling allen key 8 mm,size: lenghth of the long arm=100 mm, lenghth of the short arm=36 mm, moc: chrome vanedium steel, black finsh, allen key 10 mm,size: lenghth of the long arm=112 mm, lenghth of the short arm=40 mm, moc: chrome vanedium steel, black finsh, allen key 22 mm,size: lenghth of the long arm=200 mm, lenghth of the short arm=80 mm, moc: chrome vanedium steel, black finsh, slugging wrench, size: 1 inch,moc: chrome vanedium steel, heavy duty black industrial finish- rust resistant, slugging spanner, size: 3/4 inch,moc: chrome vanedium steel, heavy duty black industrial finish- rust resistant, reversible ratchet handle 1/2'',head dia: 64 mm, head depth: 29 mm, gear action: 32 mm, oal: 605 mm, reversible ratchet handle 3/4'', head dia: 64 mm, head depth: 29 mm, gear action: 32 mm, oal: 605 mm, torque wrench, 1/2 inch square drive, 7-35 kg, widtht: 50 mm, height: 29 mm, length: 805 mm (approx. ), weght: 3.9 kg (approx. )., torque wrench, size :1/2 inch square drive, 25- 135 nm, torque wrench, size :1/2 inch square drive, 50-220 nm, torque wrench, size :3/4 inch square drive, 135-675 nm, outside micrometer, range (200-225)mm, graduation: 0.01mm, material of the frame: stainless steel, material of the spindle and anvil: hardened stainless steel, soft face hammer 40 mm with steel handle, center punch, length: //bid details 2 / 59

CTN :45297420

11 Jun, 2026 NA

Jamalpur - Bihar

Tender For supply of portable, pneumatic drilling cum reamer machine. drilling capacity -28 mm. reaming capacity -25 mm free speed per minute 430 rpm, weight 14 kgs or less. overall length 353 mm . make- chicago pneumatic ,fuji ,ingersoll rand. or bosch or similar. [ warranty period: 30 months after the date of delivery ] ]

CTN :45281109

01 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For providing of custom bid for services - repairing replacing of heater roller sensor pneumatic valve and cylinder and bearing of automatic tape cutting and sealing machine complete work in whole job,custom bid for services - repairing replacing of heater roller sensor pneumatic valve and cylinder and bearing of automatic tape cutting and sealing machine complete work in whole job,custom bid for services - repairing replacing of pneumatic cylinder roller heater sensors bearing contro panel of automatic tape cutting and sel ing machine complete work in whole job,custom bid for services - repairing replacing of pneumatic cylinder roller heater sensors bearing contro panel of automatic tape cutting and sel ing machine complete work in whole job

CTN :45236118

02 Jun, 2026 34.64 Lacs

Murshidabad - West Bengal

Tender For supply and installation and commissioning of different machineries and tools of dihipara beekeeping cluster, dihipara, murshidabad under wbkvib during the year 2026 27 2nd call - supply and installation and commissioning of raw honey storage tank specification:fabricated from 304 grade 3 mm thick stainless-steel sheet, all joins argon welded and polished. one number manhole is provided on top. both top and bottom is dished type.capacity 1200 kg, supply and installation and commissioning of honey processing plant 1. ms control panel - 012. ss channel and angel structure - 013. pre heating tank in coil shape - 014. microfine replaceable cartridge filter press with gear pump - 015. processing tank with 1 nb coil - 016. falling film evaporator with ms stand - 017. wate ring vaccum pump 3 hp + water pump - 028. cooling tank with 1 nb pipe coil - 019. settling tank - 0210. set of ss pipes for honey piping - 0111. set of gi pipes with specials for water pump fitting -01specification:1. one no stainless steel prefilter tank having thickness of 1.6mm with volumetric, capacity of 500 kg along with 500 micron mesh.2. gear pump: made by m/s. rotodel company with full stainless steel body and gears. basic output capacity: 2000 its/hour. it will be suitably reduced to give required output.3. drive motor: 1.00 h.p. 3 phase 440 vol tefc 1440 rpm make crompton or siemens.4. pre-heating tank: made from 2.0 mm thick stainless steel sheet with heater.5. microfine filter: full stainless steel self locking high pressure filter which has poly propylene filters made of 40 micron size,6. processing tank: made from 2.0mm thick stainless steel sheet. one set of coil will be provided for processing tank.7. crompton make water circulation pump 0.50 hp, mono block, with 18 m head, 230 volt ac single phase mechanical seal.8. falling film evaporator: made from 3.0 mm thick stainless steel sheet, with concentric cone in side. subjected to vacuum and ensuring falling film, to evaporate moisture.9. cooling tank: made from 1.5 mm thick stainless steel sheet, exactly same as pre-heating tank but without heaters.10. settling tank: made from 2.0 mm thick stainless steel sheet, top and bottom dished ends fully leak proof, bottom drain for honey withdrawal.11. control panel: having cut off mcb, control circuit fuses, and mcb in each time to protect the wiring, with brass earthing bolt to prevent electric shocks.12. water ring vacuum pump: 1.0 hp, 3000 rpm, 440 volts ac, tefc. kirloskar make with 750+mm 4g vacuum.13. ms chasis made out of 75x40 ms channel in two parts., supply and installation and commissioning of semi automatic volumetric honey filling machine, twin head, stroke typespecification:this is specially designed to fill squash/juice in bottles. all contact parts are made from 304 type stainless steel materials, supported on mild steel angle structure, covered with stainless steel sheet. the machine is suitably arranged to upper and lowering of filling head with nozzle so that there is no spillage of squash or juice while filling. this helps to fill in accurate measure.no bottle no filling system.operated by 1 hp motor with gear box.filling capacity: 100ml to 500 ml.filling speed: 14/16 bottles per minute., 500 ml to 1000 ml, supply and installation and commissioning of twist off lug cap sealing machine:specification:for 100% leak proof airtight sealingno hand pulling system.this machine is ideal way to hermetically seal bottles products with twist off/vacuseallug caps to preserve taste and flavour.semi-auto-manual and pneumatic working.capacity: 600 bottles/hr of 53 to 63 mm caps. (for 200 and 400 gm. pickle)supply is complete with air compressor., supply and installation and commissioning of weight scale digital display specification:capacity: 100 kgreadability: 10 gm, supply and installation and commissioning of digital refractometer, supply and installation and commissioning of shrink tunnel specification:seals pp/pvc shrink film.separate controls for h

Central Government/Public Sector

CTN :45044754

25 May, 2026 28.20 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : supply of pneumatic compression therapy , ai enabled motion sensor for knee assessment , agility trainer-interactive rehabilitation system , hand held dynamometer , electronic goniometer , functional trainer-upper body pulley system , wheelchair weighing scale , memory card for video cameras , underwater video camera , seated leg press machine

Central Government/Public Sector

CTN :45254558

01 Jun, 2026 NA

Kurla - Maharashtra

Tender For pneumatic heavy duty rivet buster/cutter machine. detail specification and other conditions as per annexure- a attached, make: fuji or bosch or esab or chicago pneumatic or similar. (warranty period : upto 30 months from the date of supply) [ warranty period: 30 months after the date of delivery ] ]

CTN :45096060

29 May, 2026 NA

Ernakulam - Kerala

Tender For supply of general items - neumatic piston pump for, emptying oil from l.o drum, (manually operated barrel, pump), mcb-3 pole 10 a, mcb-2 pole 10 a, mcb 2pole 20 amps, mcb 3 pole c 32 amps, fuse mro - 2a, fuse mro - 4a, fuse mro - 6a, fuse mro - 16a, a10 s solo detector tester, (hfc/free smoke), hot water boiler 20 ltr, denki engineering co, 220v/3kw, tester 230v / 2w, bearing puller 3-leg 10 inch, bearing puller 2-leg 10 inch, m-10 bolt and nut with, washer- 17mm, m-12 bolt and nut with, washer- 19mm, m-16 bolt and nut with, washer- 24mm, bench wise 5", taparia punching tools set, 16 pieces, feeler guage metric 0.05to, 2mm, high pressure washer bosch, aqua tech 125, spectra park 309 cooling, water test kit part no. 739466, racor nb liquid part no., 571356, neumatic needle gun with, spare needles, felt filter (10mm thick x 30, mtr length, descaling liquid part no., 571653, sea clean plus part no., 654715, enviro clean part no. 765018, electrsolve e part no. 604389, submersible pump vertical, 1hp, 230v crompton brand, rain coat long single pice, size - m-l-xl-xxl water proof,, any reputed brand for, marine use, lemon grass oil highly, concentrated in one ltr, sealed bottle, pillow microfiber standard, size 51 x 66 cm, any reputed, brand (recron, kurlon,, sleepwell, wakfit), hand pump for clearing, basin blocks (make mr, plussection), tiffin carrier, (milton/nolta) with 3 layer, gmdss battery for walky, takie make-icom bp-234,, lithium, battery pack 9.0 v,, 3300mah, 30wh, gmdss battery for walky, takie make-ental, lithium,, battery pack 9.0 v, 3300mah,, 30wh, gmdss battery for walky, takie make- sailor, lithium,, battery pack 9.0 v, 3300mah,, 30wh, gmdss battery for walky, takie make- mucmurdo,, lithium, battery pack 9.0 v,, 3300mah, 30wh, embarcation ladder, without spreader length, beween 4 to 9 mtr as per mmd, standard with approval, certificate ( quote on per, mtr basis), pilot ladder with spreader, length beween 4 to 9 mtr as, per mmd standard with, approval certificate ( quote, on per mtr basis), safety helmet good quality, ( white/yellow/orange), colurs, flux coated soldering wire, (gram), glass tube fuse - 793650, glass tube fuse - 793651, glass tube fuse - 793652, glass tube fuse - 793653, glass tube fuse - 793655, glass tube fuse - 793656, glass tube fuse - 793657, glass tube fuse - 793658, electrical working gloves, (pair), electrical line tester, (medium), stud extractor (set), wilden pump 1 inch, (pneumatic pump, butterfly valve - dn - 50 mm, butterfly valve - dn - 75 mm, butterfly valve - dn - 100 mm, butterfly valve - dn - 125 mm, butterfly valve - dn - 150 mm, multiangle anvil cutter, external circlip remover, (large, medium & small), internal circlip remover, (large, medium & small), portable hand drill bosch, (220v - 50hz), cutting wheel 4 inch size, hand grinder machine bosch, (220v - 50hz), glass wool type - 4 inch x 10, mtr roll, engine cooling water, testing kit(drew/equalent), bamboo plywood 6x4 feet,, thickness 10 mm, used bycycle tube, double door deep freezer, hard top chest freezer,, make blue/volras/hair,310, ltr or neares, single door deep freezer,, hard top chest freezer,, make blue/volras/hair,130, ltr or neares, microwave oven, make, bajaj/wirlpool/lg - 2310 etc,, capacity 23l, rating - 230v,, power input - 1300 w,, (microwave), 1200w (grill),, 1200w (convention), power, out put 800w, frequency -, 2450 mhz, temprid sc insecticide for, bed bugs and cocroches, control - 500 ml, semi automatic washing, machine 7 kg any reputed, brand ( worlpool/lg/hair), fully automatic washing, machine 7 kg any reputed, brand ( worlpool/lg/hair), vaccum cleaner portable, (bosch, black and decker), mixer grinder, 4 jar, 750 watts, (lakshmi, butterfly preethi), television android 32 inch, led (sumsung/lg), television android 42 inch, led (sumsung/lg), wet grinder heavy duty, boiler suit orange colur sizes-m-l-xl- xxl, safety shoe with steel toe, size-6-7-8-9-10-11 any reputed, brand, rate trap, metal rate trap

State Government

CTN :45228137

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of centrifugal machine spares - spares for b&w make kt 1350 /34 centrifugal machine, oil seal 105 x 130x 15 matlic, oil seal 105 x 130 x 13 matlic, double rubber buffer for tilting chute, rubber o ring 160 x 3mm, h.t. bolt half thread unbrako 16mm x 120mm nut 16mm, nut 8 mm 8 mm, hexagonal s. s. bolt 10mm x 35 mm, hexagonal s. s. bolt 1" x 1", s. s. nut 10 mm x 10mm long, s.s. bolt half thread 16mm x 100mm, s.s.nut 16mm, s.s.allen key bolt 3/4" x 2", h.t. hex head bolt half thread with nut 20mmx90mm, h.t. hex head bolt full thread with nut 20mm x 100mm, s.s. bolt & nut 12 mm x 50 mm, s.s. clamp 2 mm thick 10mm hole, spares for nhec make nk/1100/30 centrifugal machine, s.s. needle valve 3/4" (ss-304), s.s. needle valve 1/2" (ss-304), brass spray nozzle, m.s. socket heavy duty 1/4", other spares, s.s. bolt 8mm x 25mm, s.s. bolt 10mm x 35mm, s.s. bolt 10mm x 40mm, s.s. bolt 12mm x 50mm, s.s. bolt 10mm x 60mm, s.s. nut 6 mm, s.s. nut 8 mm, s.s. nut 10mm, s.s. nut 12mm, dumping pad 75 x 150mm, dumping pad 75 x 60mm, stainless steel allen key bolt 12mm x 35mm, stainless steel allen key bolt 12mm x 30mm, stainless steel clit, rubber seal 87x103x10, rubber seal 31x40x3.5, oil seal for nk machine as per sample 75x85x10, 90x100x10, indicator elbow o ring x 3mm, indicator elbow o ring 3/4 x 3mm, clamp for rubber hose pipe size 2 x 24, rubber hose pipe with both side nut 1/2"x1000 mm 2100psi, rubber hose pipe with both side nut 1/2:x750 mm 2100psi, rubber hose pipe with both side nut 3/4":x1000 mm 2100psi, s.s. needle valve 3/4" (ss-304), rubber hose pipe x2 size with both side nut 2100psi, m.s. socket monarch nozzle, copper tube , brass connector with ferrule and nut , brass elbow with nut & ferrule , bearing housing with forged steel en-9 shaft and bearing (skf make nu-2215-2 nos., qj-215 01 no.) of nhec make nk-1100 centrifugal machine dynamically blanced, pulley od 235 mm no of grove 8 belt type c-148, moter pulley of nk-1100 centrifugal machine dynamically blanced od 326 mm no of grove 8 belt type c-148, spare pulley of bearing housing of nk-1100 centrifugal machine dynamically blanced od 235 mm no of grove 8 belt type c-148, pulley of bearing housing of kt-1350 centrifugal machine dynamically blanced od 240 mm no of grove 6 belt type spc-3550, motor pulley of kt-1350 centrifugal machine dynamically blanced od 290 mm no of grove 6 belt type spc-3550, spare shaft of nk-1100 centrifugal machine bearing housing, side cover of bearing housing of nk-1100 centrifugal machine, top cover, botttom cover, distance piece of nk-1100 centrifugal machine bearing housing, spare for 1750 kg charge centrifugal machine, oil seal 110x140x15, oil seal 170x200x15, o ring 110x3, o ring 140x4, o ring 240x5, circlip dia 140x4mm, spray nozzle flat jet 90 deg, set of tension ring for plough 60x68x12 (i set=3 ring pairs) with pressure ring, seal kit for 5" dia cylinder (02 nos.=1 set), rubber seal kit for pneumatic cylinder 6 x5 ", rubber seal kit for rotary distributor, rubber seal kit for 2" dia cylinder, rubber seal kit for 3" pneumatic cylinder, teflon seal for spindle locating arrangement, repair kit for butterfly valve 300 nb (2=1 set), repair kit for butterfly valve 200 nb (2=1 set), seal kit for pneumatic ball valve, solenoid valve 3013, solenoid valve 3012, coil for solenoid valve 3012/3013, proximity switch m 30x65, proximity switch m 50x65 for wobbling sensor, pilot operated non return valve with adapter 3/8", air filter ", flexible hose pipe 1"x1100 mm 2100psi, flexible hose pipe 1/2"x1200 mm 2100psi, flexible hose pipe 1/2"x800 mm 2100psi, flexible hose pipe 1/2"x900 mm with benjo connection 2100psi, flexible hose pipe 3/8"x1000 mm with benjo connection 2100psi, flexible hose pipe 3/8"x800 mm 2100psi, seal kit for bottom valve cylinder make heramb udyog model-hu-bdvcrd68, seal kit for main plough cylinder up/down make energy tech engineers sr. no-023110/1750, seal kit for in/out cylinder of plough discharge make-energy tech engi

State Government

CTN :45127367

25 May, 2026 NA

Chikhali - Maharashtra

Tender For corrigendum : aata mill plant capacity 200 kg per hr clining 500kg aata storage ss silo air compressor auto packing machine pneumatic system vibrator cum destoner with gst

Beveling Machine Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government