Bimetallic Sheet Tenders

Get complete information related to latest Bimetallic Sheet Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Bimetallic Sheet Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Bimetallic Sheet Tenders .

Filter

Loading....

Get Tender in Email

CTN :42776858

03 Dec, 2025 NA

Parganas - West Bengal

Tender For bid to ras supply of mcb - miniature circuit - breakers for a.c. operation as per is / iec 60898 (part 1) (q2) , molded case circuit breakers (mccb) as per is / iec 60947 (q3) , mccb with thermal magnetic / microprocessor based trip unit (q3) , m and l for opening dismantling and transporting safely of 11 tr package ac units and all as specified in pdf specification file , supply install commissioning and testing of air cooled packaged air conditioners and all as specified in pdf specification file , m and l for under deck insulation with 60 mm puf slab including application of cold bitumen on puf slab and all as specified in pdf specification file , m and l for supply assembly and erection of gl sheet with tdf flange rectangularsquare duct made out of l shaped hollow profile and all as specified in pdf specification file , m and l for modification of existing panel by opening one side panel and extending it for of incorporation 4 out going mccb of 63 a 50 hz 16 ka and all as specified in pdf specification file , m and l for duct cooperpipe insulation with resin bonded fibre glass wool nitrile rubber roll of 25mm thick and all as specified in pdf specification file , m and l for electrical and signal connection of 11tr indoor unit and all as specified in pdf specification file

Central Government/Public Sector

CTN :42825963

09 Dec, 2025 42.65 Lacs

Allahabad - Uttar Pradesh

Tender For provision of pol stores for microlight base elect section tool crib addn altn of roof sheet provn of view cutters and other allied work at certain location of af station under ge af bamrauli - surface dressing n exc 15 cm deep in soft/loose soil, complete all as specified and directed., excavation in trenches for n.exc 1.50m wide not exceeding 10 sqm on plan and n.exc 1.5m in depth in soft/ loose soil and getting out, complete all as specified and directed., excavating over areas hard & dense soil, n. exc 1.5 m deep and getting out, complete all as specified and directed., m&l for pcc 1:4:8 type d2 graded stone aggregate cement concrete in flooring, foundation, filling and mass, complete all as specified and directed., returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed., removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m. complete all as specified and directed., m&l for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed., m& l for rcc type b1, (1:2:4) nominal mix (20mm grade aggregate) foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, complete all as specified and directed., m&l for rcc (20mm grade aggregate type b1 (1:2:4) nominal mix columns, pillars, piers, posts and struts, complete all as specified and directed., m&l for rcc type b1, (1:2:4) nominal mix (20mm grade aggregate slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed., m&l for rcc type b1, (1:2:4) nominal mix (20mm grade aggregate) beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed., m&l for rcc type b1, (1:2:4) nominal mix (20mm grade aggregate to chajjas, complete all as specified and directed., m&l for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, complete all as specified and directed., m&l for formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed., m&l for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping), complete all as specified and directed., m&l for formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed., m&l for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of rcc/pcc bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide, complete all as specified and directed., s&f for mild steel tmt bars 10mm dia and over, cut to length, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed., s&f for mild steel tmt or twisted bars 6 to 8 mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in stirrups etc. complete all as specified and directed., m& l for pcc 75mm thick type c-1 ,1:3:6 using 20mm graded stone aggregate as in plinth protection, complete all as specified and directed., m&l for brick work with sub class b bricks, straight or curved on

State Government

CTN :42756421

05 Dec, 2025 NA

Rupnagar - Punjab

Tender For purchase of gym for strength and conditioning equipments - power racks, length minimum 1865 mm width minimum 1815 mm height minimum 2140 mm product weight 275 kg or more.max training weight 350 kg or more live arena 3x3 meterframe construction: heavy-duty steel construction for durability and stability during heavy lifting. made up of 75 mm x 75 mm square tubes size with 3mm thickness or more.the frame provides tighter 50 mm hole spacing and a long-lasting finish optimized for gliding attachments.power rack must have inbuilt 3 handle pull up bar, designed for veracity. the three handle pull up bar features 32mm hand in mixed configuration for supreme ergonomics. large six weight horns collars for convenient weight plate storage of four small horns. (standard six large horns). single bar hanger, double side hook for bar holder, adjustable support arm with locking features.warranty minimum 10 years on structural frame, minimum 2 years on wear and tear parts and minimum 1 year on upholstery for stitches and fixing, as applicable.the quoted brand and model must have all three valid regulatory certificates: en 957-6:2010+a1:2014, bs en iso 20957-2: 2021, and astm f1749.note: the bidder/oem must possess all four valid certifications: iso 9001:2015, iso 14001:2015, iso 45001:2018, and iso 10002:2018.the vendor must provide detailed information about these certifications along with appropriate justification., inserted platforms, length minimum 4415 mm width minimum 1095 mm thickness of wood 30 mm.dimensions of rubberized platform :length 1100 mmwidth 670 mmthickness of rubber 30 mm.feature: must have inserted wooden platform size as mentioned above, non slippery rubberized platform on both sides outside the rack as per sizes mentioned above. should be attaching snugly to the rack frame to create a complete lifting station.platform must be made of sealed plywood 30mm thick with rubber mat 30 mm thick, perfectly covered boundaries into a metal frame of 30 mm x 60 mm sq tube of 3 mm thickness. platform sheet metal should be a minimum 1.2 mm thick.it should be compatible with the specified power rack (as mentioned above) and should fit into the power rack without any gaps.warranty minimum 10 years on structural frame, minimum 2 years on wear and tear parts and minimum 1 year on upholstery for stitches and fixing, as applicable.the bidder/oem must possess all four valid certifications: iso 9001:2015, iso 14001:2015, iso 45001:2018, and iso 10002:2018.the vendor must provide detailed information about these certifications along with appropriate justification., platerform, length minimum 2090 mm width minimum 2460 mm height minimum 105 mm weight minimum 290 kgcompact footprint, reduce sound and vibration 1.8x quieter than 30 mm tiles.the platform should have efficient sound vibration reduction quality that helps to create inviting strength training environments by reducing the sound and vibration from dropped barbells and weights and clearly defining the lifting space for members, improving safety and facility flow.the custom multi-layered wood deck should be protected with a non-slip, hard wearing laminate and an inlaid rubber strip to guard deck edges, bumpers and plates from damage.solid construction with durable, high-quality materials stands up to heavy use in sports.warranty minimum 10 years on structural frame, minimum 2 years on wear and tear parts and minimum 1 year on upholstery for stitches and fixing, as applicable.the bidder/oem must possess all four valid certifications: iso 9001:2015, iso 14001:2015, iso 45001:2018, and iso 10002:2018. the vendor must provide detailed information about these certifications along with appropriate justification., landmine, plate mountable landmine length 335 mmwidth 81 mmheight 65 mmweight minimum 2.8 kgwarranty minimum 10 years on structural frame, minimum 2 years on wear and tear parts and minimum 1 year on upholstery for stitches and fixing, as applicable.the bidder/oem must possess all four

Loading, Please wait...

Bimetallic Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government