Latest bin lifter Tenders | Government bin lifter Tenders

State Government

CTN :45542764

19 Jun, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

corporations/Associations/Others

CTN :45137894

22 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; power house equipment, power generators, overhauling, servicing & commissioning of hydraulic actuators of hpbp system; service provider

Central Government And Public Sector

CTN :45567219

30 Jun, 2026 NA

Bikaner - Rajasthan

Tender For supply of spare power pack and control table and roller carriage with traversing jack compatible for hydraulic re-railing equipment of make - bemco or similar. as per specification attached. [ warrantyperiod: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45260435

16 Jun, 2026 NA

Goa - Goa

Tender For corrigendum : supply of productivity improvement equipment - portable joint gasket cutting machine as per encl , hydraulic nut cracker as per encl , safety helmets with detachable rechargeable led lamp , rechargeable safety torch , rotary hand pump as per encl , led type potable hand lamp , non contact tachometer , refrigerant gas detection and extraction kit , bilge water jet cleaning machine , air blower for electronic cabinet , cylinder shifting trolley , portable lift for oil drum , optical fibre repair kit , kitiwakelub oil analysis kit as per encl , portable vibration measuring equipment , suction cleaner for electronic cabinet

Central Government/Public Sector

CTN :45512871

17 Jun, 2026 NA

Rourkela - Odisha

Tender For hydraulic valves for ph-i yard equipment(7items) comprising of following: - valve,pressure relief,mm:dbds10k1x/315, , - valve,check,pilot operat,mm:sv20-ga-1-32 , - valve,pres relief,hyd,mm:dbds-6k-13/315 , - valve,mm:dbw10b24x/3156eg24n9k4 , - valve,hyd dc,mm:4-weh-22j-6x/6a-netz-275 , - valve,flow control check,drv-20-01.1/0 , - coupling,minimess,g1/4in,pn:ema3/1/4edcf ,

CTN :45521908

22 Jun, 2026 NA

Tinsukia - Assam

Tender For providing of hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; material handling equipment; tractor with disc harrow,hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; material handling equipment; jcb,hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; material handling equipment; hydraulic crane,hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; material handling equipment; fork lift

CTN :45321497

19 Jun, 2026 28.80 Lacs

Jhalawar - Rajasthan

Tender For corrigendum : supply of spares of soot blowers of (2x600 mw), katpp, rvunl, jhalawar-design, fabrication, supply and installation of fabricated manhole door with rearranging bends & tubes accordingly of boiler unit#1&2 (2x600mw), katpp, rvunl, jhalawarfabrication and supply of id fan guide vane at katpp, rvunl, jhalawarsupply & erection testing and commissioning of the high mast lighting system (hmls) at colony and plant premises walls at katpp, rvun, jhalawarsupply of spares of soot blowers of (2x600 mw), katpp, rvunl, jhalawarsupply and commissioning of electric wire rope hoist at id fans area in 2x600 mw katpp, jhalawarsupply of horizontal centrifugal pump for unloading 98% concentration sulfuric acid and sulfuric acid dosing pumps installed in cw chemical dosing system at, katpp, jhalawarsupply of pvc hot water distribution pipes and fittings of ndcts for unit 1 and 2 at katpp, jhalawarsupply of spares for dust suppression system for coal stock pile and conveyer system in chp, katpp, jhalawarsupply of spares for parker and hugland make hydraulic power pack of stacker cum reclaimer of chp at katpp rvun, jhalawarsupply of coupling and coupling spares for katpp, jhalawarprocurement of sf6 gas (with cylinder) of 99.9% purity for 400kv, 220kv & gcb circuit breakers at katpp, jhalawarprocurement of various testing equipments used for transformers, protection relays, and circuit breakers of unit#1 & 2 katpp, jhalawarsupply of spares of coal feeder eg3690 sr. no. 2010-109 (make- shenyang stock electric power equipment co. ltd., china) of 2x600 mw units, katpp, jhalawarsupply, fabrication and installation of gas regulating damper flaps, box support & partition plate in boiler at katpp, rvunl, jhalawarprocurement of paper ream of a4 size (75 gsm) for fy 2026-27, katpp, rvunl, jhalawarsupply, installation, testing and commissioning of high performance energy chain system in place of reeling drum of cable system in bunker travelling. tripper-2 at chp, katpp, jhalawarsupply of inline booster pump for dust suppression system at wagon tipplers in chp at katpp, jhalawarss erw pipe and fittings for sg fill pump to cpu unit# 1 and for other site purpose at katpp, rvunl, jhalawarpurchasing of rtds and thermocouples installed at 2x600mw, katpp, rvunl, jhalawar

Central Government And Public Sector

CTN :45486950

30 Jun, 2026 NA

Bangalore - Karnataka

Tender For (1) design, manufacturing, supply, erection, testing and commissioning of 5 ton eot crane with remote for demounting bay of assembly shop as per rwf technical specification no.rwf/m/m&p/2025-26/5-2 t eotc d/m bay enclosed. (2) maintenance spares as per schedule-iv and additional spares and items viz. slings / lifting tackles as per schedule-i of specification. (3) any other essential spares for two years normal maintenance to cover the complete range of mechanical, hydraulic and electrical equipment as per clause 1.3 ofspecification. (4) maintenance tools as per schedule v of specification. (5) any other accessory treated as concomitant accessory. ]

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

CTN :45304418

20 Jun, 2026 2.96 Crore

Bharathpur-Rj - Rajasthan

Tender For corrigendum : tender for supply of medical equipment required for setting up ultra burn care centre. - electro surgical unit/diathermy , skin graft mesher, , suction machine (heavy duty), , ot table (general surgery hydraulic (electric), , defibrillator biphasic, , steam sterilizer/autoclave, , burn treatment bathtub, , volumetric infusion pump, , syringe pump, , 15 (3 per bed), , electric dermatome, , multipara monitor, , icu ventilator advanced, , blood gas analyzer (abg), , video laryngoscope, , air mattress anti bedsore, , fully automatic icu beds, , over bed table, , ecg machine 12 channel, , flexible fiberoptie bronchoscope, , resuscitator hand operated adult, , resucitator hand operated pediatric, , crash cart, , instrument trolley, , automated vertical autoclave, , portable xray machine, , anesthesia workstation, , skin graft handle, , combo3 plus (tens+ift+ems+russina), , pulsed electromagnetic field (pemf) therapy, , ultrasonund therapy (1 & 3 mhz), , class iv therapeutic laser, , shockwave therapy (eswt), , air compression units for physiotherapy, ultrasonund therapy (1 & 3 mhz), , class iv therapeutic laser, , shockwave therapy (eswt), , air compression units for physiotherapy, , emg (electromyography biofeedback device), , height adjustable treatment table, , continuous passive motion (cpm), , motorized cpm-shoulder/elbow, , intelligent active-passive trainer (upper limb and lowe limb combined), , common sensorized rehabilitation gloves, , computerised pulley system, , digital gait analyzers, , quadriceps exercise chair, , tilt table (motorized), , shoulder wheel with magnetic resistance, , standard auxiliary crutch, , walkers, , elbow crutch, , wheel chair (detachable armrest & footrest), , hand gym kit, , exercise resistance bands/tubes, , balance board/wobble board, , theraputty & gel balls, , occupational therapy workstation, , foam bolsters & wedges (2 set), , kremer wire splint each set of 50, , contrast bath, , butterfly shape hydrotherapy tank, , hydrocollator (hot pack unit), , cold therapy (chilling unit)

Bin Lifter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector