Get complete information related to latest Bird Spike Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Bird Spike Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Bird Spike Tenders.
Tender For fabrication and supply of tubular lamp post made out of 3.5 meter length in that 2.9 meter above ground level, 100mm diameter c class hot dip galvanized pipe base plate of size 320mm x 320mm x10mm suitable top cover made of 3mm thick hot dip galvanized gi sheet,with necessary fixing of g.i trip l channel of size 50mmx50mmx6mm and fixing of led flood lights at 1 meter from ground level . suitable for fixing of 3 no s of led flood light fittings and suitable for fixing of 3 nos loop in loop out box . necessary drawing is enclosed. all relevant certificates should be submitted along with the supply. note:fixing of gi strip l channel subject to suitable to site and materials jindal ,tata pipes , surya roshni, apl apollo, nezone, zenith birla , bhushan steel , prakash surya,visakha steel, mkk metals, chetana stels or similar. [ warranty period: 30 months after the date of delivery ]
Tender For supply of 6 quad cable 1.4mm dia copper conductor, polythene insulated aluminiumscreened, wire/strip galvanized steel,armoured, underground, jelly filled as per specification no.rdso/spn/tc/72/2007, amendment no.1 & 2 or latest.
Tender For construction of ofc park for lmn practical trg d d - galvanized iron pole size 3.5 inch x 10 ft , suspension clamp for 8 to 20 mm wire , ss strip 202 , universal pole bracket single run , ss buckle 304 - 20 mm , cable storage bracket , anchor clamp for 10 to 14 mm wire , banding tool , steel board with acp size 3ft x 2 ft , steel gate with acp size 8ft x 7ft , chamber cc round size 2ft x 2ft , installation charges including materials
Tender For supply of almn door of size 820 mm x 350 mm with all fixing accessories , binding wire 0 pt 9 mm isi marked , cp drapery rod of 25 mm dia isi marked , door lock set , galvanized iron barbed wire hot rolled of 2 pt 5mm dia line wire , laip made of angle iron 50x50x6mm 1800mm long minimum weight of 8 pt 10 kg each laip , luke for pbs roll , oil bound distemper off white colour , paint brush 100 mm , paint dark brown , paint og , paint white , painting roller 14 inch , pbs roll 10 mtrs long each , ppgi sheet 12 ft x3 ft and 0 pt 63 mm thick , ppgi sheet of size 10 ft x 3 pt 5 ft of 0 pt 63 mm thick , punched tape concertina coil of 1050 mm dia , purlins of rhs 60mm x 40 mm x 2 pt 6mm and 2 mtrs long of shall be provided , ridge sheet 10 ft long and 450 mm wide , sds screw 2 inch , self tapping screw 3 inch , thinner , transparent fiber sheet of size 6 ft x4 ft and 5 mm thick , white cement , window glass 4 ft x4 ft with 5mm thickness , wooden door of size 2100 x 900 mm and 32 mm thick incl all fitting and fixtures , 6 sqmm 2 core armoured cables cross linked xlpe insulated with galvanized round steel wire of steel strip cables with aluminium conductor , actuator for 62 pt 5 kva genr set of mahindra , black screw 1 pt 5 inch , bty 12v 150 ah , bty connector , bulk head fitting with 9 watt bulb , feed fuel pump assy for 5 kva genr set of kirloskar , fly wheel ring for 30 kva genr set of kirloskar , governor for 62 pt 5 kva genr set of mahindra , insulation tape 19mm wide , mcb 32 amp dp , mcb 32 amp sp , pvc cable 1 pt 5 sqmm copper conductor single core , pvc switch bd of size 300 x 200 mm with 8 modules for switches and 1 module for 5 amp socket , self-starter for 62 pt 5 kva genr set of mahindra , switch socket combination 15 amp with gang box , switch socket combination 5 amp with gang box , cement of 43 grade opc in sealed bags each weighting 50 kgs , crushed stone aggregate 20 mm grading , fine aggregate sand
Tender For supply of xlpe armoured cu cable d d - item 10 , item 20 , item 30 , item 40 , item 50 , item 60 , item 70 , item 80 , item 90 , item 100 , item 110 armoured cable voltage, rated : 1100v material, conductor : copper material, insulation : xlpe material inner sheath : frls, pvc st-2 material outer sheath : frls, pvc st-2 cross section, core : 3x2.5mm2 armouring : galv. steel wire/ strip as per is, 1100 v grade,as per is:7098/88(part-1), with annealed untinned stranded copper conductor conforming to flexibility class -2 (table 2) of is: 8130/84. core laid up with suitable fillers, xlpe insulated as per is:7098/88 (part-1), inner sheath and outer sheath of frls/ frlsh-pvc type st-2 of is:5831/84, inner and outer sheath shall be applied by extrusion only. armour of galvanized, round wire/flat steel strip as per is. with isi certification marking on cable outer sheath., armoured cable voltage, rated : 1100v material, conductor : copper material, insulation : xlpe material inner sheath : frls, pvc st-2 material outer sheath : frls, pvc st-2 cross section, core : 7x1.5mm2 armouring : galv. steel wire/ strip as per is, 1100 v grade,as per is:7098/88(part-1), with annealed untinned stranded copper conductor conforming to flexibility class - 2 (table 2) of is: 8130/84. core laid up with suitable fillers, xlpe insulated as per is:7098/88 (part-1), inner sheath and outer sheath of frls/ frlsh-pvc type st-2 of is:5831/84, inner and outer sheath shall be applied by extrusion only. armour of galvanized, round wire/flat steel strip as per is. with isi certification marking on cable outer sheath., armoured cable voltage, rated : 1.1kv material, conductor : annealed copper material, ) /bid number : gem/2025/b/6644456 * /dated: 06-09-2025 & & / bid document 1 / 30
Tender For provision of lt cable, lt panel and connected items at trg area of 01 assam under ge e/m lucknow - excavation in trenches in soft/loose soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide and getting out complete all as specified and as directed by the engineer-in-charge., returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick using excavated soil complete all as specified and as directed., removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed., material and labour for dry river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading, levelling & punning complete as specified and directed .note :- punned thickness (18 cm) shall only be considered for payment., m&l for laying of fly ash brick designation 100 kg / sqcm, using old size bricks confirming to is 12894, laid flat with width equal to length of brick, laid dry over electric cable for protection complete all as specified & directed by engr-in-charge., deployment of tools & manpower for boring /drilling (horizontly) manually / mechanically under existing road max 10 m in width) suitable for passing pipe of any descreption of dia 40 to 100 mm complete all as specified and directed by engineer in charge, supply, laying jointing and testing lt ug cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured is 7098 marked, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core, laid in trench / laid under floor or fixed naked with wall / on wall / in ducts / in gi pipes etc. with and includings ms clamps, nuts, bolts, washers complete all as specified and directed. note- excation, earth works,and sand cushioning, protection bricks and pipe shall be measured and paid seprately under given items., all as per item no 07 above but lt under ground cable of size 95 sqmm 3.5 core, all as per item no 07 above but lt under ground cable of size 70 sqmm 3.5 core, all as per item no 07 above but lt under ground cable of size 50 sqmm 3.5 core, all as per item no 07 above but lt under ground cable of size 16 sqmm 4 core, s&f cable jointing kit for 1100 v (earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 25 to 50 sqmm xlpe armoured aluminium conductor ., s&f cable jointing kit for 1100 v (earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 70 to 95 sqmm xlpe armoured aluminium conductor, m&l for 80 mm bore mild steel galvanised water tubing, light grade with all fittings and fixed to walls or laid on floors / fixed to poles / or passing under road crossing, for protection of ug cable complete all as specified and directed by engr-in-charge. , m&l for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly and vertically in ground with top edge of the plate not less than 2.25 mtr from gl, connected with galvanised iron strip 32 x 6 mm, all as shown in plate no-3, of ssr, connected to the earthing test point, concrete pit in pcc 1:3:6 type c-2with rcc precast pit cover slab 400 mm x 400 mm x 50 mm with handle for lifting made out of 8 mm dia ms rod, funnel, wiremesh, 50 mm dia light grade gi tubing for protection of gi strip 32 x 6 mm, charcoal and salt in alternate 150 mm thick layers around gi earth plate, including necessary returning filling in & removal all as specified or indicated in ssr part-i, including testing to achieve earth resistance value as per is specification on completion, supply, installing, testing and commissioning factory made, cpri approved, confirming to is-5039, overall powder coated, lt p
Tender For corrigendum : supply of de-centralized materials and works for increasing capacity and installation of tf under business plan 2025-26, edd-kachhawa - supply of following decentralized materials provide by contractor at the works site as per resspo norms., stone pad 300x300x75 mm, x-arms holding clamps with bolts & nuts, f-bracket with bolts & nuts, top, dropper channel clamp with bolts & nuts for st pole, top, dropper, t-off channel clamp with bolts & nuts for pcc pole, p.g clamps for weasel conductor, danger board with clamp & bolts, dead end clamp for pole/bracket with nuts & bolts, eye- hook, suspension clamp with nuts & bolts, j hook, all. binding wire 6 mm, 1x35 sq mm ac cable (xlpe), three phase distribution box, three phase distribution box clamp (ls), e-bracket with nuts & bolts, copper l-piece 50x225x10 mm, copper l-piece 62x225x12 mm, all lugs 240 mm2, all lugs 120 mm2, all lugs 70 mm2, stay clamp with nut & bolts for st pole, stay clamp with nut & bolts for pcc pole, stay insulator, cartage of following materials from esc, mirzapur provided by department to work site including loading & unloading charge., st poles 11 mtr long, pcc poles 8.5 mtr long, all line materials with acsr weasel conductor, arial bunch cable 3x50+1x35+1x16 mm2, arial bunch cable 3x95+1x70+1x16 mm2, transformer 250 kva, transformer 100 kva, transformer 63 kva, transformer 25 kva, erection, erection of single support st/pcc pole for construction of 11 kv/lt line including digging of pit, fitting of all accessories, back filling of earth & others required work as per resspo norms., grouting of pole with 1:4:8 ratio of cement sand & brick ballast as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), grouting of stay sets including digging of pit with 1:4:8 ratio of cement sand & brick ballast as per resspo norms, fixing binding and nuzzling of stay wire. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), earthing of poles as per resspo norms, stringing & sagging of 3 phase 11 kv line upto proper sag including laying of acsr weasel conductor, binding with insulators & jumpering as per resspo norms, laying, streaching of arial bunch cable size 3x50+1x35+1x16 mm2/ 3x95+1x70+1x16 mm2 as per resspo norms, erection of sectional double pole structure of st pole for distribution t/f, including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), erection of sectional double pcc pole structure for distribution t/f with the help of one pole already erected including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), construction of transformer plinth for 250 kva transformer of 2x2x1.5 mtr. including the work of excavation for foundation of plinth plastering of walls and finishing including cost of all materials., well type earthing of 250 kva transformer by using b class g.i. pipe of 1.5 " dia and making hand pipe type earth boring iind strata of water or 60 ft. whichever is deeper about 6" of g.i. pipe shall remain above ground level 2 no. g.i. earth clamp shall also be welded to the portion of pipe which is above the ground level. through this g.i. clamp and g.i. strip 30x5mm duly galvanized shall be connected with nut & bolts. every dt shall have 2 such earthing, one earthing for t/f neutral and second earthing for t/f body. all requred materials shall by provided by the contractor., fencing of t/f with m.s. square mesh welded/fixed on m.s. angle of size 65x65x6 mm wi
Tender For : details supply of de-centralized materials & works for increasing capacity & installation of t/f under business plan 2025-26 edd-chunar - supply of following decentralized materials provide by contractor at the works site as per resspo norms., stone pad 300x300x75 mm, top, dropper, t-off channel clamp with bolts & nuts for pcc pole, e-bracket with nuts & bolts, copper l-piece 50x225x10 mm, copper l-piece 62x225x12 mm, all lugs 240 mm2, all lugs 70/95/120 mm2, stay clamp with nut & bolts for pcc pole, stay insulator, cartage of following materials from esc, mirzapur provided by department to work site including loading & unloading charge., pcc poles 8.5 mtr long, line materials with acsr weasel conductor, transformer 250 kva, transformer 100 kva, transformer 63 kva, transformer 25 kva, erection, erection of sectional double pcc pole structure for distribution t/f with the help of one pole already erected including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), construction of transformer plinth for 250 kva transformer of 2x2x1.5 mtr. including the work of excavation for foundation of plinth plastering of walls and finishing including cost of all materials., well type earthing of 250 kva transformer by using b class g.i. pipe of 1.5 " dia and making hand pipe type earth boring iind strata of water or 60 ft. whichever is deeper about 6" of g.i. pipe shall remain above ground level 2 no. g.i. earth clamp shall also be welded to the portion of pipe which is above the ground level. through this g.i. clamp and g.i. strip 30x5mm duly galvanized shall be connected with nut & bolts. every dt shall have 2 such earthing, one earthing for t/f neutral and second earthing for t/f body. all requred materials shall by provided by the contractor., fencing of t/f with m.s. square mesh welded/fixed on m.s. angle of size 65x65x6 mm with gate hinges & shutter assembly, of over all size 3x3x2.5 mtr as per drawing including cost of all materials., mounting of 25 kva transformer as per resspo norms, mounting of 63 kva transformer as per resspo norms, mounting of 100 kva transformer as per resspo norms, mounting of 250 kva transformer as per resspo norms, cartage of received back 10 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 16 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 25 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 63 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 100 kva transformer from work site to esc, mirzapur including loading & unloading charge
Tender For supply of supply of sitc of spd and conventional earthing system at lilabari airport d d - surge protection device as per rquirements , supply copper plate as per rquirements , supply of copper strip as per rquirements , supply of copper bus bar with 6 holes , supply of salt , supply of charcoal , supply of galvanized iron gi pipe , concrete cementing chamber , concrete cementing chambers metallic cover , supply of hdpe pipe , supply of funnel , supply of pvc insulated insulated copper wire , construction of earthing system earth pit , supply of earthing sign board , installation testing and commissioning of above alongwith items as described in item description