Bitumen Emulsion Tenders

Get complete information related to latest Bitumen Emulsion Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Bitumen Emulsion Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Bitumen Emulsion Tenders .

Filter

Loading....

Get Tender in Email

CTN :40569301

21 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of steel tubes, tubulars and other steel fittings as per is 1239 (part 2 - steel pipe fittings) (q3) , m - seal as per is 9197 (q3) , emery cloth (q3) , paint olive green , pvc conduit pipe 20mm , self tapping screws 25mm long , self tapping screws 55mm long , self tapping screws 110mm long , paint white , kitchen plate rack ss 2.5ft x 3ft , tar felt pbs roll 1mm 01mtrx20mtr , hanger wall , washer 15mm , syphon washer , french polish , putty , touch wood polish , road patching material cold mix , cold mix bitumen , black bituminous aluminium flash tape , dr. fixit roofseal , super strong adhesive water proof , silicon sealant 300ml , weather proofing silicon sealant , italian figure sticker roll , self adhesive uv marble tiles , fevicol sh , fevicol sr , water proofing membrance , ms door spring 250 mm , ms door spring 300 mm , door stoper 75 mm , sliding door bolt 250 mm , nails 100mm , ms screw wood 20mm , knob fancy type 25 mm , helical door spring ms , partical laminated board 8x4x19mm , bituminous pothhole , nails 1.5 inch , nails 2 inch , thinner , paint black , aluminium hyddraulic door closer , aluminium haps and stapler 100 mm , butt hinges 100 mm , nails wire 75 mm , nails wire 15 or 20 mm , butt hinges 50 mm , nails wire wire 25 mm , tower bolt alu 150mm , screw wood 25mm , screw nipple 20 x 100mm , screw wooden 20mm , butt hinges 75 mm , paint brush 25mm , white cement 1 kg , gi pipe 15mm , gi pipe 25mm , gi wire cloth 3ft , gi wire cloth 4ft , cabinet mirror , float valve 15 mm , float valve 20 mm , float valve 25 mm , gi nipple 15mm x75mm bid number/ & ( * ) : gem/2025/b/6296153 dated/ + : 31-05-2025 bid document/ 3 3 1 / 83

State Government

CTN :40535384

09 Jun, 2025 18.26 Lacs

Jaipur - Rajasthan

Tender For supply of kandhal readymade cold bituminous patching mix in zone-1, jda, jaipur (arc)

State Government

CTN :40512801

09 Jun, 2025 18.26 Lacs

Jaipur - Rajasthan

Tender For supply of kandhal readymade cold bituminous patching mix in zone-1, jda, jaipur (arc)

CTN :40514350

06 Jun, 2025 7.92 Crore

Jhajha - Bihar

Tender For mr-n/25-26/jhajha/02 - basbutiya to basahara road, providing & fixing of working benchmark pillars 01 nos. per km & 04 nos. of reference pillars required for 1 km. as per drawings given and direction of e/i, clearing and grubbing road land ( by manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of e/i, scrarifying existing bituminous surface to a depth of 150 mm and disposal disposal of scrarified materials with a lift upto 3m and lead upto 1000m as per technical specification clause 301.4, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m & 100 m as per technical specification clause 303.1. (including royality & labour cess)., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.3 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., providing and laying bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of dry lean concrete sub base over a prepared sub grade with coarse and fine aggregate conforming to is 383 , the size of coarse agg. not exceeding 25mm , agg. cememt ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 , cement content not to be less tha