Latest bitumen paint Tenders | Government bitumen paint Tenders

Central Government/Public Sector

CTN :45384656

20 Jun, 2026 31.96 Lacs

Pune - Maharashtra

Tender For corrigendum : provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, c

State Government

CTN :45516761

26 Jun, 2026 NA

Delhi - Delhi

Tender For ready mix instantaneous bituminous concrete is 25 kg bags , bitumen cold emulsion in 200 kg drum , cement -opc in 50 kg bags , kerb stone 450mm , kerb stone 300mm , paver block 60mm , paver block 80mm , tactile tiles 60mm 300x300 , jersey barriers , safety cone , traffic barricades

State Government

CTN :45412509

12 Jun, 2026 55.85 Lacs

Jaipur - Rajasthan

Tender For supply of kandhal readymade cold bituminous patching mix in zone-a jda, jaipur (arc)

State Government

CTN :45432297

19 Jun, 2026 4.70 Lacs

Multi City - Telangana

Tender For ktps v vi stages- o m- i- civil- providing epoxy coal tar paint or anti corrosive bitumen paint to the columns and inside hand railing, patch works and other miscellaneous works to the cooling tower unit-x of ktps-v stage

State Government

CTN :45411150

12 Jun, 2026 55.85 Lacs

Jaipur - Rajasthan

Tender For supply of kandhal readymade cold bituminous patching mix in zone-a jda, jaipur (arc)

State Government

CTN :45403999

22 Jun, 2026 NA

Chatarpur - Madhya Pradesh

Tender For building material-doors (wooden membrane door): 1. made of pinewood and finished with wood paint. 2. isi certified. 3. minimum door thickness: 30 mm. doors (wpc – wood plastic composite) solid: 1. made of wpc material. 2. isi certified. 3. door thickness: up to 30 mm. 4. density: 50. wooden door frames – sal wood (sawn timber). aluminum section complete door/window (isi marked): rounded profile, 20-22 gauge, 4 mm thickness. 1. sliding window with aluminum frame and pebbled glass, complete with stainless steel mesh. 2. bearings and locks made of aluminum. 3. frame in silver finish. 4. rubber gasket: 4 mm. iron gate/frame, iron board. insecticide – chlorpyrifos 20% ec. urea fertilizer. nails (3-inch). black japan bitumen paint. g.i. wire. topsoil. growth hormones. copper wire for electrical fittings (2.5 mm). copper wire for electrical fittings (1.5 mm). electrical wiring cables (10 amp, 16 amp, 20 amp, 25 amp, 32 amp); orient ceiling fans; iron grills for windows; painting materials; wall putty; white cement (for whitewashing); paints; emulsion; distemper; laminated flush doors (shutter thickness: 30 mm); ceramic glazed bathroom floor tiles (30x30 cm, isi-marked, thickness: 6–7 mm, with a premium quality certification/label on the packaging); vitrified floor tiles (60x60 cm, isi-marked, thickness: 9–10 mm, double-charged/layered, with a premium quality certification/label on the packaging); ceramic glazed bathroom wall tiles (30x45 cm, isi-marked, thickness: 6–7 mm, with a premium quality certification/label on the packaging); granite stone (thickness: 10–15 mm, premium quality); cow dung manure (2 years old, well-decomposed, with a moisture content of less than 15%, and free from pebbles, stones, and plastic); steel railings; kota stone (thickness: 15–20 mm). premium quality submersible pumps (cri) — 1 hp, 2 hp; cement (opc 43 grade, isi marked, weight: 50 kg); bricks (9" x 4" x 3") — fully kiln-fired and compliant with pwd sor standards; river sand — free from impurities such as soil, dust, gravel, or stones; crushed stone aggregate (10 mm, granite/black basalt); crushed stone aggregate (20 mm, granite/black basalt); crushed stone aggregate (40 mm, granite/black basalt); murrum (laterite gravel) & boulders — free from contamination by soil or black cotton soil; steel reinforcement bars (isi marked, thermo-mechanically treated/tmt) — 12 mm; steel reinforcement bars (isi marked, tmt) — 10 mm; steel reinforcement bars (isi marked, tmt) — 8 mm; steel reinforcement bars (isi marked, tmt) — 6 mm; binding wire; iron angles; paver blocks (60 mm) — colored and polished; profile sheets (corrugated/roofing tiles pattern); plastic profile sheets; g.i. (galvanized iron) profile sheets; stone dust.

corporations/Associations/Others

CTN :45324273

10 Jun, 2026 NA

Valsad - Gujarat

Tender For bid documents for repairing of roads by using readymade bituminous pothole patching mix using cutback bitumen (cold patching mix) as per irc-116-2014 in various area of valsad munciaplity, valsad. under: road resurfacing grant (year: 2026-27) (rate contract)

CTN :45303092

08 Jun, 2026 NA

Delhi - Delhi

Tender For supply of instant curing bituminous ready cold mix , coarse sand zone iii , stone aggregate 20mm 10mm , granular sub base , brick , precast rcc gt slab 550x600mm , paver block , road gully grating , kerb stone of m-25 grade , cement opc 43 grade , flexible median marker , bollard size 950 mm height and 150 mm round m 25 grade , delineator , retro reflective tape

State Government

CTN :45252249

03 Jun, 2026 NA

Delhi - Delhi

Tender For supply of supply of ready mix instantaneous bituminous concrete is 25 kg bags , supply of bitumen cold emulsion in 200 kg drum , supply of cement -opc in 50 kg bags , kerb stone 450mm , kerb stone 300mm , paver block 60mm , paver block 80mm , tactile tiles 60mm 300x300 , jersey barriers , supply of safety cone , supply of traffic barricades

State Government

CTN :45200327

21 May, 2026 5.22 Lacs

Jaipur - Rajasthan

Tender For supply of readymade cold bituminous mix for pothole patching in zone b, vdn, jda, jaipur (arc)

Bitumen Paint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors