Get complete information related to latest Bituminous Paint Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Bituminous Paint Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Bituminous Paint Tenders.
Tender For supply of one coach set of underframe details (cross member assy,stiffeners etc) fortrain set dtc coaches to drg no. 1. 72711024, alt."b" -1 no 2. 72711025, alt."b" -1 no 4. 72711027 alt 'c' -1 no, 3. 72711026 alt 'c' -1 no, 5. 72711028-1 no, 6. 72711029-1 no, 7. aae11542-1 no,8. aae11102-1 no, 9. aae11101, alt."a" -2 nos, 10. aae11192-2 nos, 11. aad11701 alt 'b'-1 no, 12. 72711039 alt 'a'-1 no, 13. 72711040 alt 'a'-1 no, 14. aad11526 alt 'b' -13 nos 15. aad11955 alt 'a' -1 no, 16. 72711041 alt 'a' -1 no, 17. 72711042-1 no, 18. 72711037-1 no, 19. 72711038-1 no, 20. 72711015 alt 'a' -9 nos, 21. 72711016 alt 'a' -9 nos, 22. aae11137 alt 'a' -1 no, 23. aae11138 alt 'a' -1 no, 24. 72711030-1 no, 25. 72711031-1 no, 26. 72711035, alt 'a'-1 no, 27. 72711036, alt 'a'-1 no, 28. aad11944, alt 'a'-2 nos, 29. aad11945-2 nos, 30. aad11946-2 nos, 31. aad11950, alt 'b'-1 no, 32. aad11951, alt 'b'-1 no, 33. aad11964-2 nos, 34. aae11134, alt 'a' -1 no, 35. aae11131, alt 'a' -1 no, 36. aae11381, alt 'a' -1 no, 37. aae11071 -1 no, 38. ssa11103 -1 no,39. ssa11104 - 1 no, 40. 72611031 - 1 no, 41. 72611032, alt 'a' - 1 no, 42. aae11590, alt 'b'- 2 nos, 43. 72611029 - 1 no, 44. 72611030 - 1 no, 45. aae11657 alt 'a'- 2 nos, 46. aae11658 - 4 nos, 47. aae11660 - 2 nos, 48. aae11587 - 2 nos, 49. aae11586 - 2 nos, 50. aaa12540, alt 'a' - 2 nos, 51. aae11697 - 2 nos, 52. aae11698 - 2 nos, 53. aae11591 - 4 nos, 54. aae11663 - 4 nos, 55. aae11661 - 2 nos, 56. aae11662 - 2 nos, 57. aae11059, alt 'b' - 1 no, 58. aae11060, alt 'b' - 1 no, 59. aae11588, alt 'a' - 1 no, 60. aae11589 - alt 'b' -1 no, 61. aae11730 - 2 nos, 62. aae11731 - 2 nos, 63. aae11664 - alt 'b' -2 nos, 64. 72711052 alt 'a'-1 no, 65. aae11802 - 2 nos, 66. aai11574 - 2nos, 67. aai11588 - 2 nos, 68. aab12088 - 2 nos, 69. aai11576 - 2 nos, 70. aai11572, alt 'a' - 1 no, 71. 89811025 - 1 no, 72. 89811024 - 1 no, 73. aai11571, alt 'a' - 1 no. special condition : all the items are to be supplied as coach set only. finished components except ss components shall be thoroughly cleaned and latest to a dft of minimum 60 microns and mdts-094, rev.-01 with dmnd.-01 or latest shall be applied with epoxy zinc phosphate primer as per rdso/specno.m&c/pcn/100 followed. for procedure and colour shade excluding the areas as specified in detail drawings. suitable packing to be done to prevent damage during transit, unloading and rust prevention during storage. stage inspection details. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (c) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # final product inspection. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of under frame arrgt for memu/dmc/3ph to drg no. 74511059, alt 'c' col 1. firm shall fulfill the manufacturing facility as per icf/md/spec-147, issue status-01 rev.02 with amendment no.02. special condition : packing condition as per drg no icf/j&t/misc-2487 alt 'b'. the under frame should be supplied as normal side up and side bearer side down. details for satge inspection. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion. [safety item] [ warrantyperiod: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For dn/mas acting for and on behalf of the president of india invites e-tenders against tender no m-sg-2026-515-ms_vm-2 closing date/time 03/07/2026 15:00 hrs. bidders will be able to submit their original/revised bidsupto closing date and time only. manual o ers are not allowed against this tender, and any such manual o er receivedshall be ignored.1. nit headername of worksignalling and telecom portion of work in connection withengineering works in chennai beach(msb)-villupuram(vm)section overchennai division.(msb-vm-2026-2)bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime03/07/2026 15:00date time of uploadingtender09/06/2026 16:19pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 14550242.18tendering section signalbidding style[ decision at schedulelevel ]bidding unitearnest money (rs.) 291000.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 12 monthscontract type works - general contract category expenditurebidding start date 19/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-sor 2022 items9145422.44above/below/par1please see item breakup for details. 9145422.44 at par9145422.44description:- sor 2022 itemss.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () b-non sor items5404819.7411 3900.00numbers 100.00 390000.00 at par 390000.00 rs.description:- provision of 7.2 mm holes in old/new rails to provide continuity bonding /polaritybonding etc (all other material required for the work shall be supplied by contractor) (this scheduleincludes the xing of bond wire in the 7.2 mm hole). the bond wire and channel bond pins will besupplied by railways)22606.00numbers 670.00 406020.00 at par 406020.00 rs.description:- releasing and re xing of tld boxes in dc track circuits. (this work includes releasingthe existing track connections and reconnecting the track connections after the completion of workalong with provision of necessary holes for connecting lead wires and painting of track particulars.all the materials required for the above work shall be supplied by the contractor as per the directionof the rly engineer at site.3360.00numbers7400.00 444000.00 at par 444000.00 rs.description:- re xing of released point m/c (all types) and its gound connections (existing pointmachine) including wiring and termination in point m/c and interconnections between point m/c andct box through pvc hose pipe and painting (all types of insulations connected to point work , alltypes of bolts and nuts, washer springs/ at , pvc hose pipe, 3/0.75 sq.mm copper wire,7/1.4 sq.mmcopper wire, paints and other miscellaneous items shall be supplied by the contractor). the workshall be carried out as per the instruction of engineer at site.4110.00numbers3600.00 396000.00 at par 396000.00 rs.page 1 of 16run date/time: 09/06/2026 16:19:30chennai division-s and t/southern rlytender documenttender no: m-sg-2026-515-ms_vm-2closing date/time: 03/07/2026 15:004description:- releasing and re xing of cable termination box for point machine (existing pt ctbox)- this work involves breaking of concrete andreleasing the existing cabletermination box andkeep it a side casting of foundation and erection of the released ctbox and carrying out the interconnection between point machine and ct box. the work shall be carried out as per the instrution ofengineer at site.55141.00numbers3771.78 531820.98 at par 531820.98 rs.description:- all type point machine ground connections to be released carefully withoutdamaging, kept aside and re- x the same after completion of engineering work. the work shall becarried out as per the instruction of engineer at site.66 8000.00numbers 5.70 45600.00 at par 45
Tender For repair to hardstanding, fencing, compound/boundary wall, plaster, painting, pathways and repair/ replacement and cleaning of sewage line, manholes, drain, septic tanks, soakage well and other connected items and associated under mil stn kaluchak
Tender For estimate for providing water tank and plumbing items to facilitate water supply and metal in switch yard, painting at 33/11kv sub-station at kothapally(v) papanapet(m) of medak division in medak circle
Tender For supply of set of spare parts of airless spray painting machine model no. tiger 40.110, make: vr coating pvt. ltd. items/ material details as per annexure attached.- service kit set for hydraulic part 110 cc , piston seat assembly , sensing valve , slider assembly , suction hose cup 1" bsp , filter cassette 60 mesh , ser kit for falcon gun with seat & needle
Tender For acting for and on behalf of the president of india invites e-tenders against tender no sdste-sig-t-10-26-27-cap closing date/time 10/07/2026 14:00 hrs. bidders will be able to submit their original/revised bids uptoclosing date and time only. manual o ers are not allowed against this tender, and any such manual o er received shallbe ignored.1. nit headername of workrehabilitation of relay room,location box etc and strengthening of axle countersystem over sealdah division.bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime10/07/2026 14:00date time of uploadingtender12/06/2026 18:25pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 44042528.18tendering section s and tbidding style single rate for tender bidding unitabove/below/parearnest money (rs.) 880900.00validity of offer ( days) 90tender doc. cost (rs.)0.00period of completion 9 monthscontract type works - general contract category expenditurebidding start date 26/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-sor item vide sl. no. 1 to 78 given in schedule of work. 18005976.931please see item breakup for details. 18005976.93 at par18005976.93description:- sor item vide sl. no. 1 to 78 given in schedule of work.s.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () b-non sor item vide sl. no. 1 to 48 given in schedule of work. 19318199.491please see item breakup for details. 19318199.49 at par19318199.49description:- non sor item vide sl. no. 1 to 48 given in schedule of work.s.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () c-18% gst on total items of schedule-a & schedule-b. details has beenshown in item breakup.6718351.761please see item breakup for details. 6718351.76 at par6718351.76description:- 18% gst on total items of schedule-a & schedule-b.3. item breakupscheduleschedule a-sor item vide sl. no. 1 to 78 given in schedule of work.item- 1sor item vide sl. no. 1 to 78 given in schedule of work.s no.itemnodescription of itemunit qty rate amountpage 1 of 22run date/time: 12/06/2026 18:26:01sealdah division-s and t/eastern rlytender documenttender no: sdste-sig-t-10-26-27-capclosing date/time: 10/07/2026 14:001 1 painting of existing full size apparatuscases without disturbing the terminationsand equipments inside. the work involvesscraping of old paint, applying two coats ofaluminium paint outside & two coats ofwhite paint inside apparatus cases, paintingof termination, equipment and numberparticulars on apparatus cases asinstructed by railway representative at site(paints and all other miscellaneousmaterials required for the work shall besupplied by the contractor) note: itemapplicable for alterations and maintenanceworks.numbers 100.00 1503.39 150339.002 2 alteration/modi cation in the existinglocation boxes (full size), xing ofequipment's, cable insertion, termination,wiring, testing & commissioning, two coatpainting, lettering to suit the circuits as perapproved wiring diagrams. this includesfilling with sand and plastering the same.numbers 100.00 2972.03 297203.003 3 "supply of full size apparatus case (gkptype) (as per drawing no. sw sk no. 4/90 &other applicable gkp sw drawing). thisincludes supply of a location box (gkp type)with 'e' type lock & key, tted on thelocation door on both side, e type lock(ward no. will be speci ed by engineer-incharge) as per rdso drg. no. sa-3376 andkey to drg. no. sa-3377 as per rdsodrawing no. s-11500. inspection: rites"numbers 100.0014866.951486695.004 4 "supply of hdhmr (high density, highmoisture resistance) shelf for full locationbox size 950 x 400 x 25 mm. inspection:
Tender For corrigendum : provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, c