Latest blades Tenders | Government blades Tenders

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

State Government

CTN :45092896

27 May, 2026 60.00 Lacs

Badnagar - Madhya Pradesh

Tender For supply of cleaning and sanitation and electrics and bulding material - wheat mexican , rice course, , large grain sugar, , tea leaves agni / goldie / amrit) (tata branded, , tamarind (seedless), , soyabean oil (surya/ruchi) branded, , salt iodine, , containing, , (tata/ankur), , good country, , poha, , chilli powder (agmark), , turmeric powder (agmark), , coriander powder agmark), , garam (agmark), , spices, , powder, , toor dal branded, , moong dal peeled branded, , urad dal chhalka branded, , chana dal branded, , branded stewed lentils, , peanut seeds, , sago, , rock salt, , local gram, , soybean buddy, , big sofa, , rye, , gram flour (branded), , milk (sanchi), , buttermilk/curd, , potato, , onion, , tomatoes (red/fresh), , peas (batla), , balorfali, , guarphali, , eggplant, , pumpkin, , bottle gourd, , okra, , tinda, , cauliflower, , cabbage, , spinach vegetable, , gilki, , arabic, , fenugreek, , radish, , beans, , green chilly, , green coriander, , cucumber, , carrot, , orange, , sevphal, , papaya, , calla, , laundry soap 90 gm per pack (wheel, rein, ghadi), , washing powder 1 kg per pack (wheel, rein, watch), , bathing soap 75 gm per pack (dettol, lux, cinthol), , coconut oil (parashut), , mustard oil brand, , toothpaste 100 gm per pack (colgate), , tooth brush (colgate), , blades (topaz, supermax), , phenyl, , plastic tank cleaner, , lime, , genru, , yellow soil, , bamboo broom (buddy), , palm broom, , kuchi, , toilet cleaner, , toilet brush (plastic), , large earthen pots with lids, , acid, , scissors, , comb, , razors (plastic), , plastic mugs (branded), , plastic bucket (18 litre) (branded), , plastic bucket (05 litre) (branded), , oil paint (branded asian), , plastic paint branded, , pet brush (03 inch & 04 inch), , distember branded, , turpentine, , bulb 9 watt (led) (philips, bajaj), , bulb 18 watt (led) (philips, bajaj), , bulb holder (philips, bajaj), , switches (philips, bajaj), , bulb 23 watt (led), (philips, bajaj), , bulb 30 watt (led), (philips, bajaj), , bulb 40 watt (led), (philips, bajaj), , tube light (l.e.d.) 36 watt (philips, bajaj), , led 100 watt focus, , led 50 watt focus, , wire (4 mm) (i.s.i. mark) copper, , wire (6 mm) (i.s.i. mark) copper, , wire (1.5 mm) (i.s.i. mark) copper, , wire (2 mm) (i.s.i. mark) copper, , tubewell cable (i.s.i. mark) copper, , bijli board branded (plastic) 2 x 12 inch, , electricity board (wooden) 2 x 12 inch, , tape roll branded, , mcb 32a sp watt, , mcb 32a tp watt, , power board, , a4 page ream 10x10 packet, , legal page rim, , gond bottle 250 ml, , stapler pin big pin big packet, , stapler pin small pin big packet, , carbon a4 size 02 packets, , stapler 02 big and 02 small, , ink pad blue, , cement (cubic foot), , ballast (cubic foot), , sand (cubic foot), , finely chopped, , brick

Central Government/Public Sector

CTN :45186011

01 Jun, 2026 NA

Medak-T - Telangana

Tender For corrigendum : supply of lp moving blades

Central Government / Public Sector

CTN :45302370

01 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot non ferrous scrap - aluminium fittings scrap - 98230013(13) cond. and u/s aluminium scrap consisting of tags, air filters, led fittings, fan blades, outdoor lights, avm pads, idli boxes, vessels, cookers, junction boxes, down lights, solar panel frames, acsr wires, dummy sockets, blinking lights, doom covers, bm&bc parts, hear fings, wra pump controllers, cooler, street lights, spray tins, door frames, window frames, etc. available in the bin with or without attachments. total gross weight: 8180 kgs; said to contain total aluminium content: 6376.9 kgs approx.; total ms content: 745.2 kgs approx., total gi content: 273 kgs approx., total stainless-steel content: 84 kgs approx. total plastic, rubber, fabric, foam, nv etc. content: 700.9 kgs approx. hsn code: 76020010 gst @18% on forward charge basis. note: 1) delivery on actual weighment basis only. 2) segregation not permitted. 3) purchasers/firms are requested to physically inspect the lot before offering their bids. 4) post auction no representation shall be entertained. 5) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 6) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. 7) railways does not guarantee for quality, quantity description etc. location: non-ferrous yard bin no:24

corporations/Associations/Others

CTN :45164952

28 May, 2026 NA

Rajkot - Gujarat

Tender For corrigendum : supply of replacement wood cutting blades for reciprocating saw (q4)

State Government

CTN :44816608

05 Jun, 2026 NA

Hisar - Haryana

Tender For corrigendum : supply of blades of id fans to 2 x 600 mw, rgtpp, khedar, hisar

Central Government/Public Sector

CTN :45147485

29 May, 2026 NA

Hyderabad - Telangana

Tender For corrigendum : tender for supply of welding consumables - welding hand shield armour , , welding wire brush , welding wire brush (stainless steel v grove) , air pipe (100 meters) , gas cutting googles , 11 din black glass , white glass for welding screen , spark lighter , spark lighter stone , spirit level (0.5mm accuracy with magnet) size 30cm , tin cutter - 12 (300mm) , try square engineer esquare 12 inch , tungsten rods 2% thoriated tungsten (red tip) , polyester slings 25mm x 6 meter 1 ton capacity , polyester slings 50mm x 6 meter 3 ton capacity , drum chain 2.5 meter long , capacity 1 ton , chain with o ring and 3 leg , 2.5 m long , capacity 1 ton , octoganal chisel 200mm long x 22mm cutting edge , welding hand gloves , size 18 , spanners , adjustable spanner 300mm 12 , steel rule (set) , measuring tape (set) , allen keys ( six nos set) 4mm to 14mm

corporations/Associations/Others

CTN :45146780

06 Jun, 2026 9.30 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of instruments for vats (video assisted thoracic surgery) - trocar,size11mm, autoclavable consisting of: trocar, with blunt tip, trocar cannula, flexible, without valve, length 8.5 cm, trocar, size6mm, autoclavable consisting of: trocar, with blunt tip, trocar cannula, flexible, without valve, length 8.5 cm, trocar, size11mm consisting of:trocar with blunt tip, length6cm, size11mm, trocar, size11mm consisting of:trocar with blunt tip, length6cm, size13mm, trocar, size11mm consisting of:trocar with blunt tip, length6cm, size6mm, trocar with blunt tip, with 45 luer-lock connection for insufflations, 11mm, working length 8.5cm, parenchymal forceps, atraumatic, straight jaws, single action jaws, size 5mm, length 28 cm, consisting of: mouret metal handle with haemostat style ratchet, axial with 4 locking positions for outer tube with working insert, lung forceps, dismantling, atraumatic, curved jaws, fenestrated single-action jaws in 5mm 28 cm, consisting of: mouret metal handle with haemostat style ratchet, axial with 4 locking positions for outer tube with working insert, parenchymal forceps, atraumatic, double curved jaws, size5mm, length28cm, consisting of: metal handle without ratchet with 4 locking positions, outer tube with working insert, lung forceps, atraumatic, fenestrated, single curved jaws ,size5mm, length28cm, consisting of: metal handle without ratchet with 4 locking positions, outer tube with working insert, lung nodule forceps, atraumatic, fenestrated, curved jaws, single action jaws, size 5 mm, length28cm, consisting of: metal handle without ratchet with 4 locking positions, outer tube with working insert, grasping forceps, cobra-jaws, 1x2teeth, straight jaws, single action jaws, size5mm, length 28cm, consisting of: metal handle with 4 locking positions outer tube with working insert, clickline parenchymal forceps, atraumatic, dismantling, without connector pin for unipolar coagulation, single action jaws, single curved jaws, size 5 mm, length 28 cm, consisting of: metal handle along with outer sheath with forceps insert, for use with linear staplers., grasping forceps, rotating, with connectorpinforunipolarcoagulation,size5mm,length30 cm, atraumatic, fenestrated, curved, single action jaws, consisting of plastic handle, without ratchet, with larger contact area, outer tube insulated & insert, kelly dissecting and grasping forceps dismantling, curved jaws, double action jaws, size 5mm, length 28 cm, consisting of: metal y-handle, with absorber1 geometry, axial, with 4 locking positions, outer tube with forceps insert, scissors insulated, straight jaws, curved scissor-blades, double action jaws, size5mm ,length 28cm, with connector pin for unipolar coagulation, consisting of: insulated metal handle with 4 locking positions, insulated outer tube with working insert, scissors, insulated, distally angled outer sheath, curved scissor-blades, scissor blades open horizontally to angulation, double action jaws, size5mm, length28cm, with connector pin for unipolar coagulation, consisting of: insulated metal handle with 4 locking positions, insulated outer tube with working insert, scissors, insulated, distally angled outer sheath, straight scissor-blades, scissor blades open parallelly to angulation, single action jaws, size 5 mm, length 28 cm, with connector pin for unipolar coagulation, consisting of: insulated metal y-handle with 4 locking positions, insulated outer tube with working insert, biopsy forceps, insulated, distally angled outer sheath, single action jaws, size 5 mm, length 28 cm, with connector pin for unipolar coagulation, consisting of: insulated metal y-handle with 4 locking positions, insulated outer tube with working insert, suction-coagulation cannula, with connector pin for unipolar coagulation with handle,size5 mm, length 28-30 cm in both distally angled sheath and straight sheath option, coagulating and dissecting electrode, l-shaped, insulated, with connector pin for unipo

CTN :44983230

27 May, 2026 NA

Delhi - Delhi

Tender For bid to ras supply of esd workstations,chair for general purpose,executive table (v4),revolving chair (v5),executive table (v4),revolving chair (v5),sofa set or couch (handicraft) (v2),table (handicraft) (v2),sofa set or couch (handicraft) (v2),table (handicraft) (v2),modular extendable conference table (v2),table (handicraft) (v2),panel air conditioner,professional large format display (v2),professional large format display (v2),household refrigerating appliances as per is 17550,portable electric indoor air purifier conforming to is 17531,household refrigerating appliances as per is 17550,waste container (v3),mobile containers for solid waste conforming to is 12402,desktop trays or organizers (v2),programmable paper cutting machine,battery-powered electronic clock,dry erase writing boards (v3),stainless steel name plates, monograms, labels - bhel,show case,steel almirah / cabinets (v4),plastic moulded table - preschool kit,plastic chairs for general purposes conforming to is 13713 (v3),hand held brush cutter (v2),drinking water c

CTN :45318333

05 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of smart tv 55 inch , aaa cell , aa cell , insulation tape , isopropyl 250 ml , tissue paper , lc to e2k patch cord 20 mtr , zero db duplex connector lc-lc , brush cutter 2200w

Blades Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors