Latest blood collector Tenders | Government blood collector Tenders

Central Government And Public Sector

CTN :41291127

22 Aug, 2025 18.28 Lacs

Bellary - Karnataka

Tender For labour charges for removing the veneering wall etc. , after proper documentation bringing them down at a height of 2.50 mtr , stocking for reuse , erecting and removing of supports at down properly , etc. , complete , labour charges for removal of core filling in between stone masonry veneer wall and stacking the useful materials and conveyance of debris to a far away from the monument premises , etc.complete , labour charges for excavation/scientific clearance of earth deposit to retrieve fallen architectural stone elements and to expose the buried plinth and original floor & drainage system , including stacking useful stones and disposing of the excavated earth after proper screening outside the temple complex , etc.complete , labour charges for resetting the old available veneer stone and new stone in original position in lime mortar 1into2 ratio including necessary pointing the stone joints in same mortar with suitable colour oxides , curing , as per the standard specifications and as directed etc. complete (materials supplied by the department) , labour charges for construction of brick work for corefilling and in the edges with country bricks specially made as per requirement in lime mortar 1into2 ratio , curing etc. , complete (materials supplied by the department) , labour charges for providing apron and pathwaty using new stone flooring slabs of size 1.20m to 0.90m in length , 0.60m to 0.45m in breadth and 3 inch to 4inch thick properly dressing as per the old available clues setting in lime mortar 1into1.5 ratio above the foundation concerete and pointing the stone joints with lime mortar 1into2 ratio , curing etc.complete (materials supplied by the department) , labour charges for supplying and making of new veneer stone with good quality of new stones properly dressing all sides and architectural designs as per the available clues in the place of damaged and missing members(materials supplied by the department) , disposal of waste and unserviceable materials outsidetemplepremises , stacking the stone members and leveling the undulated area , etc.complete. 1.disposalofbuilding rubbish/malba/similar unserviceable , dismantled or waste materials-100 cum 2.removal and stacking of store members-75 cum 3.or leveling the area-creation of parking space approximately size of 80m x 6m x 0.50m-240 cum

corporations/Associations/Others

CTN :41277675

07 Aug, 2025 NA

Pimpri - Maharashtra

Tender For 3/2025-26 estimated rates for uhwc instruments - estimated rate for instruments uhwc, technical specification of dressing tray with cover material should be stainless steel medical grade size 300*200*50mm with led, technical specification of dressing drums with cover 11 19 material should be stainless steel ss 304 capacity 0.945 liters should be seamless, technical specification of weighing machine (infant) capacity upto 20 kg resolution 10 gm. accuracy + 1to 10 gm. measuring position supine, sitting and standing. large lcd display, technical specification of surgical scissors made of stainless steel 150 mm, 6 inch size, technical specification of sphygmomanometer aneroid 300mm with cuffkey technical specifications:cuff: typically made of durable, washable material (e.g., nylon) and reinforced at the sides. size: ranges from child to adult sizes (small, medium, large, extra-large), and ideally, the cuff bladder length should be at least 80% of the patients arm circumference and the width at least 40%. fastening: usually features velcro or similar for a secure fit. bladder: inflatable bag within the cuff, connected to the inflation system. inflation system: bulb with a valve for inflating the bladder and a pressure release valve. gauge:aneroid: features a dial with a needle indicating pressure, usually graduated in 2 mmhg increments from 0 to 300 mmhg. digital: provides electronic readings of blood pressure and may include features like pulse rate measurement. tube: typically made of rubber or silicone, crack-resistant, with a length of around 70 cm. accuracy: aneroid gauges are generally calibrated to meet certain accuracy standards, such as +/- 3 mmhg. materials: materials used in sphygmomanometers must be durable, corrosion-resistant, and suitable for the intended use. environmental: sphygmomanometers are designed to function within specific temperature and humidity ranges, typically 5 to 40 c and 15 to 85% rh. , technical specification of sims retractor/depressor 1/2/3/4 size stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of cheatle foreceps 8/10/12 size stainless steel material should be medical grade anticorrosive and nonmagnetic, technical specification of sponge holder 6/8/10/12 size stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of plain forcep plain forcep of size 6/8 inchs stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of tooth forcep tooth forcep of size 6/8 inchs stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of needle holder 6/8 inchs long, locking stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of stethoscope chest piece finish : black, machined stainless steel chest piece size : 1.75 inch / 4.4 cm chest piece technology : double sided diaphragm material :epoxy/fiberglass eartip type : soft sealing headset material : wide diameter aerospace alloy / anodized aluminium length : 28 inch stethoscope with extra ear plug & diapharm, technical specification of hub cutter the cutting blade of the cutter will be made of stainless the thickness of the blade will not be less than 0.5 mm one side sharpen to cut minimum of 10,000 cuts. all other metal if used in the hub cutter will be made of galvanized carbon steel which will withstand rusting even in rough weather with high humidity coastal region for a minimum of five year(is 277 of 2003 galvanized steel sheet specification) the sharp container should be made of polypropylene (pp) of not less than 4 mm thick and should be white/translucent. shape: the shape of the container will be such that the lid is tightened with the body. capacity range : able to destroy from hub of ad syringe with needles from 18-28 gauge diameter and from 10-25 mm length and fitted with all types of needle fitti

Central Government/Public Sector

CTN :41242870

19 Aug, 2025 3.50 Lacs

Udyogamandal - Kerala

Tender For tender for supply of revamping of boundary wall lights : : 0- supply of light fixing frames fabricated out of ms structural materials details as per sl no 1 in boq , frp lining of light fixing frames details as per sl no 2 in boq , supply and installation of led street lights details as per sl no 3 in boq , supply and installation of 4 x 4 junction box details as per sl no 4 in boq , supply laying dressing clamping details as per sl no 5 in boq , supply of 19mm single compression brass type cable gland details as per sl no 6 in boq , supply of 16mm suitable for 1 sq mm flexible cable pg gland details as per sl no 7 in boq , supply of power contactor 3p details as per sl no 8 in boq , supply installation and commissioning of power control junction box details as per sl no 9 in boq , supply laying dressing and termination of 1 sq mm single core copper conductor details as per sl no 10 in boq

CTN :41209063

04 Aug, 2025 NA

Srinagar - Jammu And Kashmir

Tender For supply of dental materials - lignocaine hcl 2 percentage without adrenaline 30 ml inj suitable for ophthalmic use also , periodontal pack non eugenol two paste system of base and catalyst 90 gm each , articulating paper , patient bib plastic , lining cavity composite cal hyd based photo cure prefilled syringe of 25 grams with applicator tips , antiseptic mouth wash containing sodium fluoride and triclosan bott of 100 ml , crown and bridge plaster die stone super hard for pkt of 1 kg , endodontic access bur set of 06 , gates glidden drill sizes number 16 length 28 mm , mta based root canal sealer pack of 23 gm , crown and bridge metal np alloy for box of 1 kg , blue wax for inlay , anticaries fluoride rinse mouth wash with sodium fluoride acidulated phosphate bott of 300 ml , box denture and appliance , chlorhexidine mouth wash with 0 point 12 percentage sugar alcohol free bottle of 450 ml in amber coloured bottle , desensitising paste stannous fluoride potassium nitrate sodium monofluro phosphate tube of 4055 ml or gm , gel for root canal preparation containing water soluble lubricant 1517 percentage edta tube of 3 point 0 5 point 0 gm , abrasive mounted diamond fg round 1 point 8mm , abrasive mounted diamond fg inverted cone 1 point 8mm , root canal sealer paste for obturation containing two tubes preloaded syringes , plaster dental stone pkt of 1 kg , material impression alginate pkt in 300 to 500 gms , dental mouth mirror top autoclavable with noncorrosive glass size no 4 for , flowable lightcure composite kit complete of four syringes of 24 gm each with etchant and bonding , clove oil bottle of 50ml , gp solvent bott of 10 20 ml , single rotary glide path file 21mm , single rotary glide path file 25mm , calcium hydroxide with iodoform root canal dressing and filling paste insyringe of 24 gms , pulpryl medicament root canal , post extraction resorbable fiber based alveolar dressing jar of 1012 gms , medicament root canal chelating , cement zoe reinforced temporary , cement kalsogen liquid bottle 10 ml , antimicrobial hand gel containing ethyl alcohol 60 percentage plus cyclomrthicone c12 to 15 alkyle plus cetyl lactate , lentulo spiral size 21 mm and 25 mm , cervical and undercut wax red transparant , ceramco dentine powdershade a3 , ceramco dentine powdershade a2 , emax press ingots a2 lt , emax press ingots a3 lt , emax press ingots b2 lt , modelling liquid vita , opaque liquid vita , ceramic finishing kit , c plus endodontic files , disc mandrels for dental laboratory , biostar sheet 1mm , gutta purcha f1 , gutta purcha f2 , gutta purcha f3 , orthodontic normal tooth brush , palodent matrix system , mouth ulcer gel containing choline salicylate plus lignocaine tube of 10 gm , gc tooth mouse , protaper retreatment assorted files 01 02 03 dentsply , protaper gold rotary pkt of 06 , protaper hand normal pkt of 06 , bulk fill composite syringe , color changing alginate , dentine desensitizer , sodium hypochloride endo 3 percentage , caoh2 calcium hydroxide powder , hemostate gel syringe , light cure acrylic shade a1 a2 , unifloss , metal finishing bur for dental lab pkt of 10 bur , abrasive disc size 33 2 point 2 mm pkt of 50 , ceramic finishing diamond bur pkt of 5 , protaper next x1 and x2 , hyflex rotary files cm assorted 21 mm , hyflex rotary files cm assorted 25 mm

CTN :40996310

04 Aug, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of surgical dressing materials to be made in 24 lots in 24 months - dressing gauze, size 10cm x10cm x 8 ply, non sterile, o. t. gauze, x ray detectable, 10x 10 x8 ply non-sterile, abdominal gauze swabs, x-ray detectable, 30cm x 30 cm x 12 ply non-sterile, gamjee roll, 15 cm x 2 mtrs. non-sterile, surgical gynaec sanitary pads, non sterile,made from gauze & cotton

CTN :41146879

11 Aug, 2025 NA

Porbandar - Gujarat

Tender For supply of refurbishment of photo studio - acrylic name board tally 01 ft , partition for dressing area and changing area with lockable door , dresser room mirror frame with wall mount glass shelve including small storage drawer wall mount , replacement of lighting, changing with intermediate 4000k led power saver lightings , roller blinds 100 percentage full blackout materials to avoid daylight , electric wiring extension for gypsum board celling , gypsum board false celling with concealed led stripe lights and down lights led , painting of all walls along with ceiling including putty work one coat of primer and two coats of plastic paint standard make

Central Government/Public Sector

CTN :41055028

31 Jul, 2025 NA

Golaghat - Assam

Tender For corrigendum : providing of operation and maintenance of other machines and plants - operation and maintenance of other machines and plants - instrumentation contract for miscellaneous instrumentation jobs-10 installation of direct type pressure gauge, temperature gauge, rotameters, flow gauge,etc. including transportation from the wh/iw, necessary tubing, connection etc. but exclusive of supply of materials. 100 nos., 20 installation of direct type pressure transmitter, pressure switch, temperature switch, solenoid valve ( inch to 1 inch), ip converter, thermocouple, rtd, limit switch, position transmitter, vibration transmitter, proximity/ vibration probe, temp. transmitter,speed probe etc. including transportation from the wh/iw, necessary tubing, connection, cable glanding, ferruling, lugging etc. as applicable but exclusive of supply of materials. 320 nos., 30 installation of diaphragm/ remote seal type pressure gauges etc. with accessories including transportation from the wh/iw but exclusive of supply of materials. rating : upto 600# flange rating. 20 nos., 40 installation of diaphragm/ remote seal type pressure transmitter, pressure switch etc. with accessories including transportation from the wh/iw, mounting, connection, cable glanding, ferruling, lugging etc. as applicable but exclusive of supply of materials. rating : upto 600# flange rating. 20 nos., 50 installation of level switch, displacer type level transmitter etc. with accessories including transportation from the wh/iw, mounting, connection, cable glanding, ferruling, lugging/ termination etc. as applicable but exclusive of supply of materials. rating : upto 600 # flange rating. 10 nos., 60 installation of tank level transmitters radar/servo with accessories including transportation from the wh/iw, mounting, gi earthing,glanding,termination etc. but exclusive of supply of materials. 5 nos., 70 installation of instrument control valve with accessories including transportation from the wh/iw, mounting, tubing, connection, cable glanding, ferruling, lugging/ termination etc. as applicable but exclusive of supply of materials. valve size : upto 2"300# 20 nos., 80 cable laying testing of frls armoured power/control/signal cables made trenches,cabletrays, pullthrough pipes or exposed on wall. beam/rakes; trussestie/beam or embedded in floor. unit rates quoted for installation of cables shall be same irrespective of route and method of laying. the rates shall include laying, pulling of cables, proper dressing of cables on cable trays, racks, vertical raceways and supply and installation of saddles, spacers and nylon chord for tying as required, identification tags at strategic points / every 50meter intervals, aluminium clamps with fasteners,etc. cable identification aluminium tags at strategic points/every 50meter interval for identification of cable;etc. complete. the straight through joints/tying with armour in the cables should be avoided and rate includes all leads and lifts from and to yard. meggaring to be done before laying of cables.laying of instrumentation/fo armoured cables/power cables including transportation,dressing , clamping (with aluminium clamp at 600 mm interval), tagging (engraved on ss plates with ss tiebelts), inclusive of supply of consumables like cable tie, aluminium clamp and cable tag : type and size: armoured , od : upto 0.5" ( approx.).exclusive of supply of cables, 22500 meter, 90 cable laying testing of frls armoured power/control/signal cables made trenches,cabletrays, pullthrough pipes or exposed on wall. beam/rakes; trussestie/beam or embedded in floor. unit rates quoted for installation of cables shall be same irrespective of route and method of laying. the rates shall include laying, pulling of cables, proper dressing of cables on cable trays, racks, vertical raceways and supply and installation of saddles, spacers and nylon chord for tying as required, identification tags at strategic points / every 50meter intervals, aluminiu

CTN :41166616

28 Jul, 2025 21.62 Crore

Patna - Bihar

Tender For mgsy/25-26/ teghra /03 - excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., providing and laying cutting edge of mild steel weighing 40 kg per metre for well foundation complete as per drawing and technical specification. as per morth clause no. - 1200&, plain cement concrete in open foundation complete as per drawing and technical specifications pcc grade m -15 below abutment well cap, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification rcc m-35 in well curb, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well bottom plug, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rcc m-25 in well steining, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well intermediate plug, well sinking as per technical specification, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), for 7.00 m dia well :; pier, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), sand filling in wells complete as per drawing and technical specifiction. as per morth clause no. - 1207, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rccm-35 in well cap, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth @ rs. 225.00 per m for service road., providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well in one water, providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well in four water, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 67.622+155.612 =223.234 t, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf , qty = 23.851+24.330+1.762+0.313+1.289+1.139 =, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specificatio

CTN :41166617

28 Jul, 2025 24.46 Crore

Patna - Bihar

Tender For mgsy/25-26/ manjhaul bakhari /01 - excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., providing and laying cutting edge of mild steel weighing 40 kg per metre for well foundation complete as per drawing and technical specification. as per morth clause no. - 1200&, plain cement concrete in open foundation complete as per drawing and technical specifications pcc grade m -15 below abutment well cap, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification rcc m-35 in well curb, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well bottom plug, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rcc m-25 in well steining, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well intermediate plug, well sinking as per technical specification, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), for 7.00 m dia well :; pier, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), sand filling in wells complete as per drawing and technical specifiction. as per morth clause no. - 1207, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rccm-35 in well cap, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth @ rs. 225.00 per m for service road., providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well in one water, providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well in four water, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 67.622+155.612 =223.234 t, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf , qty = 23.851+24.330+1.762+0.313+1.289+1.139 =, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical sp

CTN :41166618

28 Jul, 2025 23.47 Crore

Patna - Bihar

Tender For mgsy/25-26/ manjhaul bakhari /02 - excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., providing and laying cutting edge of mild steel weighing 40 kg per metre for well foundation complete as per drawing and technical specification. as per morth clause no. - 1200&, plain cement concrete in open foundation complete as per drawing and technical specifications pcc grade m -15 below abutment well cap, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification rcc m-35 in well curb, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well bottom plug, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rcc m-25 in well steining, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well intermediate plug, well sinking as per technical specification, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), for 7.00 m dia well :; pier, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), sand filling in wells complete as per drawing and technical specifiction. as per morth clause no. - 1207, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rccm-35 in well cap, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth @ rs. 225.00 per m for service road., providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well in one water, providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well in four water, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 67.622+155.612 =223.234 t, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf , qty = 23.851+24.330+1.762+0.313+1.289+1.139 =, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical sp

Blood Collector Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector