Latest blow bar Tenders | Government blow bar Tenders

CTN :44993428

16 Jun, 2026 7.15 Lacs

Rampur-Up - Uttar Pradesh

Tender For bid to ras bid to ras supply of fabrication and construction of copper plate earthing details of electrodes and earth pit at akashvani rampur, uttar pradesh , interconnecting earth electrodes with providing, fabrication and fixing of 50mmx3mm copper strip at akashvani rampur, uttar pradesh , copper strip laying for extension of earthing system up to the xtr hall, ups and lt panel and terminating in bus bar by digging the soil and placing the copper strip along the trenches at air rampur , providing of 375x38x6mm copper bus bar with insulators and steel nut bolts and the fixing of 375x38x6mm copper bus bar is to be done to terminate the different earthing system at akashvani rampur. , providing and fixing of nomenclature sign marker for earth pits at akashvani rampur, uttar pradesh , digging of trenches of size 450mmx600mm total length 118mtr for 185 sq mm 3.5core and starting from electricity board energy meter to lt panel inside room and to respectively by digging the path , providing and grouting of 2 nos. of 3inch dia g.i pipes of different length on the cement concrete flooring and along the vertical walls. total length of both pipes is 27 mtr. , providing, grouting and fixing 2 nos. of 4inch dia g.i pipes along the ms stand of main mccb at energy meter. total length of both pipes is 14 mtr. , unwinding roll of 185 sq mm 3.5core al. cable from the cable drum and laying 2 length of this power cable through the trenches and through the gi pipes as laid down at akashvani rampur , reconstructing the cc flooring and repairing the area with cement concrete and stone aggregate mixer and finishing the surface, complete in all respect at akashvani rampur , providing and fixing of lt cable route marker made up of 2.5inch dia signage with 10mm x 2ft long ms rod at akashvani rampur, uttar pradesh fabrication and construction of copper plate earthing details ) /bid number : gem/2026/b/7445375 * /dated: 24-04-2026 & & / bid document 1 / 22

State Government

CTN :45466096

15 Jun, 2026 30.00 Lacs

Siwana - Rajasthan

Tender For annual rate contract for provding new water service connection with material under division siwana - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement fo

corporations/Associations/Others

CTN :45480138

10 Jun, 2026 NA

Ariyalur - Tamil Nadu

Tender For auction sale of scrap old and used electrical motors,bearing scrap,aluminium cable scrap,copper cable scrap,rubber scrap,scrap e-waste (it and instt,elect),high chrome steel scrap (blow bar)

CTN :45439988

19 Jun, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of chain link fence c c - chain link fence , poles , chain link jali , tmt bar , powder coating painting on all items , accessories , hole digging , erection of poles with rcc , curing of poles , erection of jali , erection of tmt bar

CTN :45448080

26 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of provn of prefabricated store shelter , pvc insulated cable copper conductor 1 point 5 sqmm in 90 mtr roll , pvc insulated cable copper conductor 2 point 5 sqmm single core in roll , pvc insulated cable aluminium conductor 6 sqmm , flexible wire 23 oblique 76 copper conductor , pvc casing capping 25 mm wide 2m long , ms screws 6mm x 19 mm , ms screws 4mm x 19 mm , ms screws 6mm x 40 mm , switch piano type 6 amp , switch and socket combination 5 pin 5 amp with pvc gang box , switch and socket combination 15 amp 5 pin with pvc gang box , main switch 32 amps obelique 240 volt dp , mcb 6 amp sp , mcb 10 amp sp , mcb 32 amp dp , angle holder , led bulb 14 w , led tube light fittings of 20w strip batten fittings complete , ceiling fan complete with blades , bulk head fitting of 18 watt with complete accessories , fr electrical insulation tape , ceiling rose 6 amp pilot 02 plate , change over switch double pole 32 amp , mcb box 6 way spn , rectangular wooden switch board with hylam sheet on top , pvc round block , exhaust fan 450 mm sweep , pvc switch board 6 points , earthing set complete , prefabricated gel earthing electrode of pipe in pipe technology , air termination single pointed copper rod 12mm dia and 300mm long , gi pipe 100mm dia 2 m long medium grade with base plate , back fill compound , ci manhole cover of size 30cm x 30 cm with handles , aluminium strip 25 x 3 mm , gi strip 32 x 6 mm , insulator for fixing down conductors , integral water proofing compound , synthetic enamel paint white colour 1st quality , synthetic enamel paint og colour 1st quality , synthetic enamel paint brown colour 1st quality , red oxide zinc chromate primer for metal surfaces , wooden primer white colour , taurpentine oil , oil bound distemper in off white colour , weather coat exterior emulsion , panting brush 50 mm size , mild steel chromium plated 25mm dia and 3mm thickness , fan hook made of 12 mm ms round bar to be hanged from purlin , ms binding wire 0 point 90mm dia , texture finished gypsum board false ceiling panel , chair office cushion , office table steel , steel racks , pvc chair with arms , mild steel dunnage , de spanner set size all type , hand gloves leather streatcheable with wollen inner first quality , brick trowel steel , mortar pan steel , measuring tape 15m long steel , shoval with plastic handle and plastic d grip and carbon steel blade , axes picks 3 kgs for digging with wooden handle , plier cutting 200mm for barbed wire , mild steel material handling trolley of size 1200mm x 600mm x 300mm , mild steel semi automatic portable concrete vibrator needle , portable concrete mixture machine

CTN :45432866

04 Jul, 2026 NA

Bidar - Karnataka

Tender For supply of 48 core unarmoured ofc , plb 32 by 26 mm hdpe pipe wall thickness 3 mm , excavation trenching digging 1.6 meter depth and laying of ofc including splicing at each joint and drops and back filling as per standard , trenching by hdd railway track and roads , right of way row , laying of hdpe pipe including ofc laying and jointing enclosures as per requirement , 48 core fiber joint enclosures , joint chambers or manholes 1 mtr x 1 mtr rcc ring type with cemented base , route marker of 3.5 feet long with engraved marking and 1.5 feet underground in cement base , ofc warning - caution tape , 48 port lc-lc fdf with side mounting and sliding feature and termination of ofc in fdf , tjb metal with wall mounting fitting and accessories , lc- lc duplex patch cords 1 mtrs , lc-lc duplex patch cords 3 mtrs , media converter fibre to rj-45 with power adapter , 15 u l2 rack glass door and locking facility with installation of rack on wall with installed spike buster of 5 socket 16- amp socket and 5 meter power cord , iron bar to be fixed on the wall for l-2 switch rack , cable tray metallic for routing of ofc and cat-vi cable up to l-2 rack , cable manager , patch panel 24 port cat-vi , industrial grid socket , ac spd , chemical earth pit en voltage should be less than 2 volt and earth resistance less than 3 ohms , eearth strip copper from earth pit to l-2 rack , 1 kva ups with online parameter monitoring system , battery bank 12 volt 42 ah

Central Government/Public Sector

CTN :45429716

16 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - scrap pway fitting consisting of sej small fitting, fitting for switches, fish plate, stud bold,xing bold, ci block, sej chair plate, gauge tie plate, slide chair, meal liner, rail screw, clamp, tie bar patti, distance block, fish bolt, rail cut pieces below 2mtr, sej angle, bearing plate, st sleeper, ci block, cut pcs of rails below two meters, screw key, inserts, digging bar, nut bolts of sort and sizes including xing bearing plate, and other similar types of pway fittings items with or without nut, bolt and other attachments.location - b by 1 near office

State Government

CTN :45084701

05 Jun, 2026 5.06 Lacs

Guntur - Andhra Pradesh

Tender For corrigendum : supply of plumbing and carpentry material c c - shower heads , angle valve cock , slimline single flush tank lever handle , dual flush knob button for single piece closets , soap holders , soap holders , sintex nipples , sintex nipples 1 , slimline single flush tank syphon set , standard seat cover for western water closet , seat cover screw hinges , health faucet gun , faucet gunwall hook set , waste pipe flexible , waste pipe flexible for wash basin , cpvc , cpvc pipe 1 , cpvc pipe 2 , cpvc pipe 3 , cpvc pipe 4 , cpvc pipe 5 , cpvc coupling 1 , cpvc coupling 2 , cpvc pipe coupling 1 , cpvc pipe coupling 2 , coupling 3 cpvc , cpvc pipe coupling 4 , cpvc tee 1 , cpvc tee 2 , cpvc tee 3 , cpvc pipe tee 1 , cpvc pipe tee 2 , cpvc pipe tee 3 , cpvc l-bow 1 , cpvc l-bow 2 , cpvc l-bow 3 , cpvc l-bow 4 , cpvc l-bow 5 , cpvc l-bow 6 , brass l-bow , tee elbow , brass elbow , brass tee , brass fta 1 , brass fta 2 , drain cleaner packets , brass fta , fitting cpvc , reducers cpvc 1 , reducers cpvc 2 , reducer cpvc 3 , bends cpvc , fixuture cpvc , cpvc clamp 2 , cpvc clamp 3 , cpvc dummy 4 , cpvc dummy 5 , cpvc dummy 6 , cpvc dummy 7 , water tap aerators foam , health faucet wall hook set , drain cleaning plunger , renderock plug , silicon sealant , spun filters , ro membrane high flow , frt flow restrictor , smps adopter 24v , elite sediment filter , elite carbon filter , big pump , selonoid valve sv , allen key set , wood cutting blades , iron cutting blades , aluminum cutting blades 1 packet , wall cutting blades 1 packet , 2 in 1 screwdriver , spirit levels , plastic gahmela , digging bar , hoe with wooden , aluminium drill bit kit , wooden drill bit kit , door stoppers , door magnets , box wrench , ended spanner set cs 6 to cs 22 , hacksaw blade with frame , ss aldrop size 10 inch , aluminium aldrop 12 inch , ss aldrop size 1 , ss hinges size 2 , ss hinges size 3 , ss d type handles 1 , ss d type handles 2 , door closer set , h type handle set with lock , concrete drill bit 2 to 18 size set , pipe wrench 1 , pipe wrench 2 , monkey plier multipurpose , floor trap , hacksaw blades , wood screws size 1.5 inch box , measurement tape , measurement steel tape , measurement cloth tape , aluminium self thread screws 1.inch box , aluminium self thread screws 0.75 inch washer head box , aluminium self thread screws 0.75 inch box , 1.5 china nails box , 38mm plastic wall plugs packets , 1inch flexible hose water pipe , adjustable wrench , kit drilling , chipping machine medium weight 5kgs , heavy duty hammer drill machine , hand cutting machine , wood,tiles and marble cutting machine , laser distance measurer

Central Government/Public Sector

CTN :45302387

28 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - abandoned old buildings/sheds/structures of mg workshop- 04 units, unit no. 19 - small shed near dome, unit no. 22 - record room, unit no. 23 - dwm office, unit no. 24 - machine and generator room location - mg workshop bvp. this lot of abandoned condemned buildings consisting of released door with chokhat wooden u/s - 3 nos, released window with chokhat wooden u/s - 41 nos, released wood - 1.296 cum, released ac sheet approx. - 433 sqm, released steel door u/s - 60 kg, released manglore tiles approx. - 620 sqm, released rails from structures u/s [41.25.50r & other miscellaneous type of rail off sizes] - 896 kg, ms scrap. i.e tie bar, flat, angle, fish plate, nut, bolt, ms sheet door, steel bar, gi sheet, xpm jalli etc. off size approx - 6726.7 kg, released masonary /rubble approx - 290.9 cum. custodian - sse (w) bvp, mode of delivery by lot, loading by purchaser. note: 1. dismantling is permitted up to ground level only. digging below ground level is not permitted. due care is to be taken by the bidder/purchaser to avoid unwanted mishapes at work spots. they should ensure to keep a safety banner around the work spot till it is completed since the locations are surrounded with working offices. 2. after removing/ clearing the rcc/ brick machonary rubbish from the spot only, the delivery of wood/ iron material will be affected. 3. contractor should take care of any cable while dismantling and digging. damage to railways shall be recovered as per extent rules. 4. part delivery/ part handing over is not allowed. 5. any ng/mg/bg pway rail lines or pway scrap with or without attachments lying under or beneath the building/sheds/structures or surrounding area are not deliverable. 6. any non-ferrous material of high value if found from the lot, it needs to be submitted by the purchaser to the custodian. 7. power of attorney along with aadhar card/identity proof/address proof must be submitted to this office for verification of authorised person by bidder before handing over (if any.) fdp 50 days.

State Government

CTN :45293777

29 May, 2026 3.54 Lacs

Multi City - Telangana

Tender For procurement of tools and equipment for lascars/helpers towards operation and maintenance activities for irrigation sub division no.1, nizamsagar - supply and transportation of 1 hp single phase self priming mono block ip44 motor pumpset. makes: texmo / cri / ksb / aryenvarsha / lubi / falcon , supply and transportation of 5 hp three phase mono block ip44 motor pumpset. makes: flowell / waterman/ ellen / narayani / sai varsha / sterling / duke / samudra / ajantha , supply of 13 mm fibra fiberglass measuring tape - 30m/100ft with unbreakable abs case, durable curved mechanism handle & steel end hooks, make: freeman as directed by engineer-in charge , supply of 2.00 hp four stroke straight shaft brush grass cutters with 2-teeth blade (14 inches) for cutting, which is 360° inclinable. ideal for tough, sloping, and rugged terrains. make:-honda, agriplus, neptune, green leaf as , supply of 4 sq.mm 3 core pvc / xlpe insulated sheathed multi core bright annealed bare copper conductor heavy duty industrial cables for voltage grade upto 1100 volts as per is: 694:2010 including all transportation charges etc complete. , supply of axe with wooden handle as directed by engineer-in charge , supply of chain saw 22"(petrol) for tree cutting with 58cc powered as directed by engineer-in charge , supply of chains for chain saw machine as directed by engineer in charge , supply of electric shock proof hand gloves as directed by engineer-in-charge , supply of gumboots with steel toe isi mark for men as directed by engineer-in-charge , supply of hammer as directed by engineer-in-charge , supply of hand saw with wooden handle(iron prunning curved saw) for grass, wood, tress cutting as directed by engineer-in charge , supply of heavy duty steel tiller pitchfork with handle as directed by engineer-in-charge , supply of hoe tool (favda) for digging heavy duty as directed by engineer-in-charge , supply of iron digging bar/crow bars as directed by engineer-in charge , supply of nylon rope of 20mm diameter 60 mts in length as directed by engineer-in-charge , supply of plastic multipurpose gamelas (43.8 cm x 39.2 cm x 13.2 cm) as directed by engineer-in charge , supply of rechargeable aluminium body led torch with 120-volt ac/dc charger long range as directed by engineer-in charge , supply of saddle / clamps suitable for fixing 4 to 10 sqmm 2 core cable. , supply of safety helmet hard hat steeplejack climbing work construction worker adjustable headband 2 side venting design cushioning as directed by engineer-in-charge , supply of sickle with wooden handle for weed cutting as directed by engineer-in charge , supply of sluice operating handles as directed by engineer-in-charge , supply of taparia combination spanner set css25 (25 pieces) as directed by engineer-in charge , supply of tool box & screw driver kit as directed by engineer-in-charge , supply of waterproof standard length, high quality polyester fabric double coating reversible rain coat with hood & inner mobile pocket. set of top and bottom as directed by engineer-in charge

Blow Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government