Latest blower scavenge Tenders | Government blower scavenge Tenders

Central Government/Public Sector

CTN :45166607

25 May, 2026 NA

Pune - Maharashtra

Tender For supply of blower scavenge for traction motor & oil cooler along with motor for all types of 3 phase locos as per clw spec. no. clw/es/3/0021/h or latest. make: clw approved sources only [ warranty period: 30 months after the date of delivery ]

Co-operative

CTN :45073104

18 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of the electric miscellenious material - empire tape 1", p.v.c. tape " steel grip make, glass tape size 1", cotton tape 1", black insulation tape 1" johnson & johnson make, fiber glass sleeve 1 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 10 mm, 18 mm, film paper 7 mile/ 10 mile, nomax paper 7 mile/ 10 mile, plastic coated leatherized paper 7 mile/ 10 mile, fiber glass pipe " x 4 to 1" x 4, condensor 2.5 mfd, 3.15 mfd, 4.0 mfd, 6.0 mfd, 8.0 mfd, 10.0 mfd, 30.0 mfd, 36.0 mfd, 100.00 mfd, 120.00 mfd, exhaust fan three phase 415 volt, 50 hz isi mark, size-18", size-24", exhaust fan blade size-15", size-18", size-24", auxilary contact block 3ta61,220 volt, 4no+4nc, auxilary contact block 3ta24/28, heater rod 1000 watt 12" long, 1500 watt 12" long, petrolium jally 50gm pack, alluminium/copper crimpling lugs (dowells make/ svs make), lug punching machine upto 400 sqmm crimpling dia r4 to r14, crimpling die r-4 to r-14, phase tester taparia make, c.r.c 226, hot air blower, benzene, insulating plier 8" taparia make, thinner dr.beak l1 twenty litre pack, air dry varnish dr.beak make elmo luft 1a - 21 litre pack, becktol red/grey dr.beak - 4 kg tin, motor connection plate for bbl/ke/siemense/crompton make motor 7.5 hp, 10 hp, 15 hp, 25 hp, 40 hp, screw driver set taparia make, proximettry switch ps 18 dbpo 5-30 vdc, h.b.c./hrc fuse link 250amp. tkf 250, 660 vac, 80 kag g.e.power controls, isi mark, volt meter 144 x 144mm, 0-600v, ae make, square type volt meter, 96 x 96, 0-600v, pedistal type amp meter 0-200 ctr 200/5, 0-300 ctr 300/5, 0-400 ctr 400/5, 0-600 ctr 600/5, flash mounting digital frequency meter 94 x 94mm, 45-55hz, 144x144mm, 45-55hz, soldering rod, soldering iron, soldering flux eyre no.7, soldering wire 60% + 40%, megger upto 1000 volt (hand operated), megger upto 1000 volt (mechanical operated), bakelite sheet 1/16" x 2 x 4 to 3/8" x 2 x 4, bakelite rod 2", potentio-meter pankaj make 500 ohm 3 watt, 5k ohm 1 watt, 600 ohm 3 watt, 10k ohm 1 watt, diode 15k kitron forward, diode 15k kitron reverse, power diodes for t.g.set 321 umr 100 reverse, power diodes for t.g.set 321 umr 100 forward, diode 12 hr 40/u.s.r. 120-40 usha 40 amp. normal polarity, reverse polarity, brass holder for fibrizer 400 hp slipring motor, brass holder for cane unloader carbon brush size- 40 x 40 x 20, brass holder for cane unloader carbon brush size- 25 x 25 x 100, carbon holder spring for above holder size- 40 x 40 x 20, carbon holder spring for above holder size- 25 x 25 x 100, copper carbon brush m-15 e quality(a) with pig tail 8 x 18 x 30, 10 x 30 x 40, 16 x 32 x 42, fibrizer motor 22 x 32 x 45, cane cutter motor 20 x 40 x 50, 25 x 25 x 40, 25 x 25 x 50, 1500 kw alternator 25 x 40 x 55, (b) without pig tail (cane unloader) 25 x 40 x 40, 20 x 20 x 96/100, 25 x 25 x 100, ( c ) graphited carbon brush with double pig tail for centrifugal machine 12x32x45, 10x30x40, copper carbon brush m-15 e quality with double pig tail 25 x 32 x 50, 25 x 40 x 50, 32.5 x 32.5 x 12.5 (eg-224), copper carbon brush m-15 e quality for 1500 kw alternator rotor size 25 x 40 x 55, carbon holder for 15kw exciter jyoti make, tension spring for above, d.c.volt meter 65x65, 0-100 amp. panel mounting, push button element vaisno make 1no+1nc, rectifier 200amp + base (usha), semi conductor fuse gsg 1000/350, 600 volt ac, 350amp (bussmann make), fuse kit kat 20 amp. ee make, fuse kit kat 32 amp. sm-32 ee make, fuse kit kat 63 amp. sm-63 ee make, c.t.operated flash mounting amp meter 96x96mm 0-200amp ctr 200/5, 0-300amp ctr 300/5, 0-400amp ctr 400/5, 0-500amp ctr 500/5, 0-600amp ctr 600/5, 0-800amp ctr 800/5, 0-3000amp ctr 3000/5, but volt meter 0-600 v, current transformer ae 50/5,100/5,200/5,400/5,600/5, plastic cooling fan for ke/bbl/ngef make motor 3hp, 5hp, 7.5hp, 10hp, 15hp, 20hp, 25hp, 30 hp, 40hp, 50hp, flush type synchronius timer 2 delay 5-120sec. em 1000 gec, crane duty motor sq cage duty s-4 (crompton/gec/bbl/siemense make) all size/type, squarrel cage induction motor (c

Central Government/Public Sector

CTN :45152936

25 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of cooling fan of transformer radiator blower motor as per drawing no. wr/sk/e/aux-1147. [ warranty period: 30 months after the date of delivery ]

CTN :45138902

14 May, 2026 NA

Kanchrapara - West Bengal

Tender For supply of tr. motor cooling blower casing (duct/dom) complete with net guard and impeller but without motor for locos as per clw spec. no. clw/es/b-14/c and g.a drg. no. clw/es/sk-2/b-14/c. [ warranty period: 30 months after the date of delivery ]

CTN :45139886

28 May, 2026 NA

Kharagpur - West Bengal

Tender For supply of oil cooling blower motor of continuous rating 30 kw (centrifugal design) for three phaselocomotive as per rdso's spec. no.-e-10/3/09 (motor) amendment no.-01 to 06 as per rdso's letter no.el/3.2.176/1 dt.-22.12.2021 [ warranty period: 30 months after the date of delivery ]

CTN :45103188

02 Jun, 2026 NA

Asansol - West Bengal

Tender For corrigendum : supply of set of end shields for oil cooling blower motor 30kw of m/s cgl or similar make. set consisting of de side end shield-01 no.nde side end shield-01 no. with inner and outer grease cups of both side.[ warranty period: 30 months after the date of delivery ]

CTN :45118039

15 Jun, 2026 NA

Bokaro - Jharkhand

Tender For supply of oil cooling blower motor of continuous rating 30 kw (centrifugal design) for three phaselocomotive as per rdso's spec. no.-e-10/3/09 (motor) amendment no.-01 to 06 as per rdso's letter no.el/3.2.176/1 dt.-22.12.2021. [ warranty period: 30 months after the date of delivery ]

CTN :45091143

21 May, 2026 NA

Kharagpur - West Bengal

Tender For supply of 2 ton split air-conditioner of bee 5-star rating, with rated standard cooling capacity of minimum 6100 watt ( 2 ton), with the function of cooling only, with rotary compressor, inverter (variable speed) type, suitable for 230 v ac, 50 hz system, with 100% copper coil, eco friendly refrigerant, anti-freeze thermostat, with thermal protection for blower motor & condenser motor. conforming to bis specification no. is:1391 (part-2) 2023 & isi marked. bee 5-star rating must comply to ministry of power notification no. s.o. 2794(e) dated 16th july, 2024 & s.o. 3984(e) dated 28th august, 2025 or latest with minimumindian seasonal energy efficiency ratio of 5.6 or latest. refrigerant copper pipes (suction & return) of minimum 4-meter length each, nitrile rubber tube with density 55 kg/cubic meter or more, fire performance class 1, rate of burning class v-0, water vapour diffusion resistance factor (%u03bc) more than 12000, service temperature 10 to 105-degree c, surface flame spread class 1 & thickness of minimum ? inch, relevanttest certificates to be submitted. nitrile rubber tube shall be with suitable inner diameter to suit & to wrap the complete length of refrigerant copper pipe and aluminum foil lamination of 0.2 mm thick to cover entire length of the copper refrigerant pipes will be supplied along with each air-conditioner. the supply shall include one pair of outdoor ac machine stand(containing fasteners) and one pair of indoor and outdoor pcbfor each unit. make: any indian is approved make. [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :44875942

11 May, 2026 NA

Indore - Madhya Pradesh

Tender For corrigendum : supply of air conditioner e e - gas check-up pressure testing , full gas charging , nitrogen pressure testing , internal leakage repair , water leakage repair , drain pipe replacement , insulation refixing , copper condenser coil split , copper condenser coil window , copper cooling coil split , cooling coil repair , new compressor , replacement compressor old , pcb repair inverter , pcb repair non-inverter , pcb replacement universal with remote , capacitor , contactor , sensor transfomer fuse replacement , fan motor , blower motor , motor bearing chenge noise adustment , swing flap motor blade replacement , new ac installation , ac uninstallation , outdoor indoor reinstallation , copper piping with insulation and wire , foam jet deep ac service , lite ac service , anti-rust spray external cleaning , visiting or inspection charge

CTN :45050258

01 Jun, 2026 NA

Patiala - Punjab

Tender For supply of blower for oil cooling unit with casing including 30 kw motor for oil cooling unit (wound with corona resistance wire) as per rdso specification no. rdso/2016/el/spec/0123 rev.-0, and drawing no. rdso/2016/sk-6/el/spec/0123, rdso str no. rdso/2014/el/str/0083 rev.-0, rdso specification no. spec/e-10/3/09 (motor) with amendment nos. 01 to 06, and rdso str no. rdso/2008/el/str/0048, rev.-0. [ warranty period: 30 months after the date of delivery ]

Blower Scavenge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Co-operative

Central Government/Public Sector

Central Government/Public Sector